How to put covers on the Lada Granta video

Installation of car covers

If a car owner has purchased a new set of “clothing” for his seats, but does not know how to install covers made of eco-leather or other material, he can use the recommendations below. In practice, two methods are used, according to which you can quickly and easily tighten car covers. Most vehicle owners try to put on their seats without first removing them. True, such a manipulation can only be carried out with more budget-friendly options; if the owner of the car plans to equip the interior with more expensive “clothes,” he will have to remove all the seats and, after the procedure, install everything back. Before you begin, you must first remove the headrests and thoroughly clean the chairs.

When installing car covers, you should remember one rule - work should start from the front seats. The cover, first of all, is pulled over the back of the chair, then it is carefully straightened out. The next step is to fix the fasteners, which, as a rule, should be included in the kit. The procedure requires time and attention, it should not be carried out in a hurry; the appearance of the seats and its further convenience during operation depend on correctly performed manipulations. If the cover you are putting on does not fit well on a chair with bolsters, then it is advisable to involve another person in the work who would help compress the seat elements intended to support the back. The fastening elements of the covers are often equipped with zippers, which must be positioned so that they are on the side opposite to the person.

Installation of car covers on the rear seats can be done according to several options. In this matter, one should proceed from the characteristics of a particular brand of car. As practice shows, preliminary dismantling of the rear seats helps to solve this problem more easily. Naturally, this slightly increases the time it will take to transform the interior salon space.

We recommend: The dangers of oil starvation in a car engine

In most modern cars, a unit secured with plastic parts may, when removed, due to carelessness of the owner, lose its factory fixation. It is better to put the covers on the rear seats together so that you can carefully pull on the “clothes”. Due to the elongation of the rear cushions, it is very difficult to cope with this task alone. Difficulties may also arise with leveling the cover. Installation of car covers must be carried out according to the instructions, which will prevent the product from being overtightened.

If a car enthusiast does not know how to put on a cover that does not have holes for headrests, he must carefully and carefully “dress up” the seat, and then make the necessary recesses himself. It is advisable to arm yourself with a sharp knife, with which you can make a cross-shaped cut. If after installation there are protruding ends of the fastening parts on the seat, they will need to be pushed under the cover with a thin screwdriver.

How to properly refit the seats of a Lada Priora sedan?

The task of “dressing up” the interior is not difficult, and is quite within the capabilities of a home-grown designer. Replacement must begin with the front seats. For example, from the driver's seat.

Successful play of coating colors

Design features and dimensions of universal cases

Almost all models of modern protective devices worn on car seats (both front and rear) are made using the so-called separate technology. A standard kit usually consists of 11 parts:

• 2 – for the lower parts of the front seats;
• 2 – for the backs of the front seats;
• 1 – for the lower part of the rear seat;
• 1 – for the back of the rear seat;
• 5 – for head restraints.

The best (but also the most expensive) option is to purchase covers made specifically for a specific car model. Then you can be sure that they will fit the seats exactly and there will be no problems with their installation.

Universal car covers (the most popular option) are produced mainly in two standard sizes: S - for small cars (for example, Opel Astra, Volkswagen Golf and the like); M is a standard size suitable for most car seats.

The responsible manufacturer indicates in the instructions an approximate list of car models for which the products it produces are suitable. And an experienced sales consultant will tell you which set of car covers is best for you to purchase.

We recommend: Decoding the MS marking on rubber

Should I remove the chair before installation?

Any specialist will tell you that installing car seat covers starts with the front seats. But then there are disagreements, this concerns primarily the need to dismantle interior elements. As practice shows, this action is not mandatory, since experienced craftsmen are able to replace the coverings on chairs located in their places.

Others claim that the seat needs to be removed to provide full access to it. This increases the time required by at least two hours. But it becomes possible to disconnect the terminals from the battery, which are attached to the side airbags. Naturally, in the presence of such a protective element. There are other arguments in favor of dismantling:

• In some car models, it is necessary to first remove the plastic overlays, which is extremely problematic to do in the cabin.
• Installation requires constant rotation of the chairs.
• Sometimes there simply isn’t enough free space, especially for small cars. This negatively affects the quality of work performed.

To avoid these difficulties and ensure reliable installation of the covers, it is recommended to dismantle the seats.

This work is performed according to the following algorithm:

1. Start from the driver's seat.
2. Having pushed it all the way, unscrew the bolts on each side.
3. Now move the seat as far as possible towards the steering wheel to unscrew the remaining bolts.
4. Remove the side covers, carefully dismantle the plugs, after which the bolts are unscrewed with a regular Phillips screwdriver.
5. All that remains is to remove the lining, for which you need to carefully pry it up with the same screwdriver and remove it from the clamps.

Some drivers may mistakenly believe that the principle of putting covers on seats is the same for all types of such devices, however, in reality, a lot depends on the manufacturer. For example, budget Chinese cases will have a completely different mounting principle than the more expensive original options. As practice shows, any of the covers purchased by the car owner must be put on the seats with the utmost care, strictly following the manufacturer’s instructions. The article below will talk about how to properly put covers on car seats.

We recommend: How to replace the heater radiator on a VAZ 2107

How to put on car seat covers correctly

Everyone who owns a car has thought more than once about how to keep car seats in their original form for longer. After all, over time, dirt settles on them, subsequently causing irreparable damage to the surface. In fact, there is a solution to the problem, and it is quite simple - these are car seat covers. So you bought these covers, but there is still one small problem - how to put them on correctly?

First, of course, you need to take the covers out of the packaging and see what the kit consists of. As you know, many cars have different front seat covers. Therefore, you need to immediately determine which cover is intended for the right seat and which for the left. To do this, you need to see if the case has a means for mechanical adjustment of the pockets, armrests and back. When you have already decided which cover is left and which is right, place the corresponding covers on the corresponding seats.

Also, when installing covers, it would be worth paying attention to the head restraints, because in some car brands the front and rear head restraints are of different sizes, which is often quite difficult to notice. To decide which head restraints are rear and which are front, just put them next to each other, and you will immediately see what you need.

First you need to put covers on the front seats. To do this, you first need to remove the head restraints, then put the cover on the back of the front seat. After this, the cover is put on the lower part of the chair. The covers are attached using special elastic bands and hooks. And the last step is to put the cover on the headrest, after which you attach it back to the chair.

The next step is to put the covers on the back seat. Unlike the front seats, the rear seat needs to be removed from your vehicle. You should put the part of the cover that has a zipper on the back of the rear seat, and the part that doesn’t on the back seat. This cover is also secured with appropriate elastic bands and hooks. After all this, you need to put the back seat of your car in place.

Just because you put special covers on your seat does not mean that your seats will last forever. Do not forget that the covers only protect the upper part of the chair. If you don't remove the seat covers from time to time and wash them or take them to the dry cleaner, dirt will seep through them and still stain your seat. But if you follow this advice, then everything will be fine! I wish you success!

Covers for front seats

For those who do not want to spend a lot of time installing protective devices for car seats, seat covers can be a good alternative to full-size products.

The undoubted advantage of such products is their ease of installation, which usually takes only a few minutes and does not require explanations or recommendations. The downside (and a very significant one) is that numerous parts of the seats remain unprotected. As a result, they can not only get dirty, but also fade on sunny days.