Lada Granta engine protection (installation)

Crankcase protection function Grants Liftback

The main functions of the armor are:

• oil pan protection;
• transmissions from mechanical damage while driving;
• accidental deformation when hitting obstacles.

The design of the sheet is made so as to fit as closely as possible to the pallet and not take away the height from the ground clearance.

Owners are not always satisfied with the standard protection, workmanship, and material. It is often practiced to install another modification. We will look at how to do this yourself and what is needed for this in this article.

Self-installation of crankcase protection on a Lada Granta car

As you know, bad roads can be merciless to vehicles.
Regular off-road driving not only kills the chassis, but can also harm the engine. In this case, installing a crankcase protection would be a reasonable solution. You will find below how to do this correctly on a Lada Granta car with a traditional body and a liftback, as well as a video of installation of the crankcase protection. Engine crankcase protection for the Lada Granta liftback is an important attribute of the vehicle. It is a structure made of metal or plastic and is designed to protect the engine and other components of the car from mechanical damage. Main functions of crankcase protection:

1. As you understand, first of all, this is the protection of the main components of the machine, which are located under the bottom. With the structure installed, the likelihood of mechanical damage is reduced significantly.
2. Safety.
   Additional strength is guaranteed by stiffening ribs. With the protection installed, the owner of a Lada Grant has no need to fear theft, because attackers will be blocked from accessing the main components of the vehicle.
3. Anti-corrosion properties.
   They are provided thanks to a special powder coating, which is typical for most design models. If everything is opened with Movil and treated with an anti-corrosion agent, and such a design is used, you don’t have to worry about the safety of the metal.

If you decide to purchase and install this element on your car, then you need to know something about the material. Such elements can be made of stainless steel or composite materials. Less commonly found on the market are plastic structures. They are absolutely ineffective and in most cases are installed on cars on the assembly line as a gift.

When choosing, you need to focus on the hardness of the material. The tougher it is, the more reliably your engine will be protected. With minimal rigidity, the structure can bend or crack even with a minor impact.

Installation

This process is not labor-intensive; even a beginner in this matter can handle it. In fact, this procedure takes no more than twenty minutes. Therefore, it should not cause any special difficulties, especially since you will see in the video how this is done. But in order to do everything at once, you should prepare in advance.

Actually, to replace the element you only need a set of wrenches, no other tools are needed.

Also, of course, you will need the structure itself that you will install. For Lada Granta cars, crankcase protection from Kalina is perfect.

But keep in mind that it is different for automatic and manual transmissions. Therefore, consider this factor before purchasing.

New protective structure for the Lada Granta engine crankcase

Step by step work

So let's get started with the installation:

1. First, you need to drive your vehicle into a pit or overpass so that you have free access to the bottom of the car. Place wheel chocks under the car and set the handbrake.
2. The front wheels may interfere with installation.
   If you are uncomfortable, then lift the front of the car on a jack and remove both wheels. But if you put the front of the Lada Granta on a jack, then before you begin installing the structure, place supports under the car. In this case, ordinary bricks will do.
3. Get under the bottom.
   You may already have standard factory engine protection installed. If this is the case, then take a wrench and unscrew all the screws around the perimeter that secure it and dismantle the structure. Clean the lower part of the motor from dirt and dust, if necessary, treat with an anti-corrosion agent to prevent rust.
4. As you can see, it's not that difficult.
   Now all that remains is to install the new structure. It is attached very easily, it is quite possible to do it yourself. Take the same bolts on which the factory design was installed and screw your purchased crankcase protection onto the bottom of the Lada Granta with their help. On the rear side, which is closer to the interior, the structure can be attached to the lever supports. On the front side it is attached to the so-called crabs.

Actually, this completes the procedure. You can learn more about installation from the video provided below.

And remember that using low-quality material in the future can only harm the car. For example, if you purchase a structure made of plastic, then know that it will not be as reliable as a metal one. Of course, the salesperson in the store will tell you about all the advantages of plastic structures, that they supposedly do not rust, and so on.

If, with a strong impact from the bottom, the metal device bends only a little, then the plastic one can not only crack, but also shatter into pieces.

And if this happens, then, unfortunately, there are no guarantees that the plastic piece will not get stuck in some pipe of the cooling system.

Read more: AUTO.RIA - airbag: what is it, meaning, principle of operation

Therefore, draw conclusions and do not buy the cheapest products. More details about the installation are shown in the video.

From this video you can learn about a more detailed procedure for installing the protective structure of the Lada Granta engine.

• How to change the oil in a Lada Granta engine
• Replacing the low/high beam lamp on a Grant
• Checking the level and changing the oil in the Lada Granta gearbox

Car Lada Granta black

Installation

What types of crankcase protection are there for the Lada Granta Liftback?

• factory all-metal;
• all-metal custom analogues;
• one-piece construction made of polymer material, polyvinyl chloride.

The original armor is made of a sheet 2.0 mm thick, analogues have a thickness from 2.0 to 3.5 mm, depending on the material and technical characteristics.

The methods for fixing the plates are identical: with four bolts around the perimeter of the sheet in the standard holes. The exception is extended protection. They are fixed from the back to the lower suspension mount (silent block).

How to install crankcase protection on Lada Kalina 2?

HomeVAZ 2110How to install crankcase protection

Many cars, in particular the Lada Kalina Cross, are already equipped with crankcase protection at the factory, but, much to our chagrin, in most cases it is not strong enough and rather serves as a decorative element.

There are protection options available for almost any model, the price of which depends on the material from which it is made.

As a rule, experienced car enthusiasts immediately after purchasing a car replace the factory protection with a new one.

Car Lada Kalina Cross

The crankcase protection is a fairly simple design whose main purpose is to minimize or completely prevent damage to the crankcase, which is located at the lowest point of the body.

Protection is a necessary part in any car and is produced separately for each vehicle. Negative environmental influences, possible impacts, dirt and dampness are what await your car during any trip.

Engine crankcase protection

Many models have special protective wings, which, in addition to mechanical damage, will help keep the protected units clean.

Good crankcase protection not only does not reduce ground clearance, but also improves aerodynamics.

This unit does not require maintenance; it is enough just to check during a routine inspection to see if dirt has accumulated underneath it and if rust has appeared if the protective sheet is made of metal sheet.

Installation is quite simple and does not require much time; drivers usually cope with it themselves.

This video shows the correct installation of the crankcase guard.

Functions

Main functions of engine crankcase protection Lada Kalina:

• protection against mechanical damage to the lower part of the engine;
• prevents the entry of dirt and moisture;
• prevents access to alarm units, which are usually located below;
• protects wiring, connectors, air conditioning pipes, timing belts from moisture and oxidation;
• improves aerodynamic characteristics, which makes the car more economical.

Probably, after all, the main requirement for engine protection on the Lada Kalina can be called its rigidity. It must withstand and protect the components in the event of a collision with any obstacle or stone. Possible deformation of the sheet should not reach the crankcase.

Also, after installing the sheet, the ground clearance should not decrease, or if this is unavoidable, the decrease should be no more than two centimeters. Otherwise, the protection will very often cling to even the most insignificant obstacles.

The installed sheet should not become an obstacle in the event of a frontal collision and should allow the engine to go down. This is essential for the safety of the driver and front passenger.

A large number of different tech. holes significantly reduces the strength of the engine. But at the same time, they are necessary, for example, so that you can change the oil without dismantling the protective sheet. Ventilation holes must be provided to prevent crankcase overheating.

Technological holes

The sheet can only be attached to elements that have sufficient strength - primarily the beam, engine subframe and spar.

It is important that special damping pads are used to secure the structure. If they are not included in the kit, then you probably need to purchase them separately.

Types of protection

Most often, car underbody protection sheets are made of structural steel. It has a number of advantages when compared with sheets made from other materials.

First of all, it is necessary to note its low price, as well as durability. If for some reason the sheet was deformed, it can be easily straightened by removing it even in normal garage conditions.

The negative point is, of course, a lot of weight.

Plastic protection is the lightest, but among its main disadvantages is that it can break if hit with sufficient force. It is also worth noting that the term plastic can mean various materials:

• fiberglass;
• carbon;
• Kevlar.

Kevlar Sheet

Installing a protective sheet on a Lada Kalina is quite simple and any car enthusiast can handle it independently within half an hour. Since you will have to work with the lower part of the car, you will need a hole or overpass.

Tools

To install or replace a sheet on a Lada Kalina, we will need the simplest tools that any car enthusiast has:

• ratchet wrench;
• extension;
• set of heads.

Ratchet with heads and extension

Sequence of unscrewing bolts

1. Having reached the bottom of the car, if there is an old factory protection (the so-called boot), then the first thing you need to do is remove it.
2. We begin dismantling by unscrewing the front bolts, then the side bolts and then the rear. When removing the protection, think about how to support it or invite a partner, since after unscrewing the last bolt, the sheet may fall on you.
3. Now we need to install a new one. To do this, apply a sheet and begin to tighten the bolts.
4. Don't tighten them too much right away.
5. First bait them, and then walk around in a circle and tighten everything until it stops.
6. It is worth noting that some types of protection may require different fastenings and therefore may require other tools.

Read more: Robot gearbox when to change the oil in a robotic gearbox

Tightening bolts with a ratchet and extension

Sorry, there are no surveys available at this time.

This video shows the installed engine protection on a Lada Kalina 2 car.

Often, Lada Kalina owners need to dismantle the engine protection. This is mainly due to incidental repair operations. But not all motorists know how to do this correctly. In this article, we will look at the reasons why it is necessary to dismantle the protection, as well as the process of how to do it correctly.

Reasons for dismantling

The viburnum is installed on a lift and is ready to dismantle the protection

There are quite a few reasons why it is necessary to remove the engine protection (also called crankcase protection or engine splash guard). Some Kalina owners don’t even know why and why dismantling is necessary.

So, let's look at the main reasons why engine protection is removed:

1. Replacement of the part itself due to its deformation due to hitting an obstacle.
2. Replacing or removing the front bumper will require removing the protection.
3. Changing the oil in the engine or gearbox.
4. Removing the engine or other engine components.
5. Repair and restoration work on the front part of the body.
6. Replacement of timing elements, starter or other parts that require access from below.
7. Other operations that require dismantling the protection.

So, the main reasons have been considered, and you can begin the preparation process.

What you need

To dismantle and install the engine protection, you will need a Phillips screwdriver and a 10mm socket (wrench). When the tools are prepared, you can proceed directly to the process, which will take an average of 10 minutes.

Dismantling the Lada Kalina engine protection takes place in a pit or a lift, so you should worry about the availability of such a place in advance. It is advisable that the machine is cooled down, since one careless movement can lead to a burn.

Panoramic view of the protection installed on the Lada Kalina

So, let's proceed directly to the removal process itself.

Raise the car and find the mounting bolts. There should be six of them, as indicated in the photo.

The places where the bolts (screws) are located for securing the standard protection of the Lada Kalina engine are shown.

1. First, you need to unscrew the rear fastenings so that the protection sag.
2. Because it can be uncomfortable, the operation is best performed with an assistant.
3. An assistant holds the guard, and now you can unscrew the front four bolts.

This is how you can easily and simply dismantle standard engine protection in 5-10 minutes.

Refinement and tuning

General view of additional engine protection for KalinaRecommended engine protection for Lada Kalina from Sheriff production

Many manufacturers offer a wide range of additional protective equipment that will make it possible to protect the motor.

Installed additional protection for Kalina

However, to install it you will need to make additional holes for fastening. But, this is done easily, using a drill and a drill. To cut the thread, you should use a standard 10-point tap. It is bolted to the body side members.

Rear view of installed additional engine protection Lada Kalina

conclusions

Removing the engine protection on the Lada Kalina is quite easy and will only take 10 minutes. To complete the operation, you will need a minimum set of tools, which are found in almost any garage.

The AvtoVAZ company has revised its directions and started producing the new Kalina 2 with crankcase protection. When a car owner purchases a car and looks at this protection in his garage, he sees that it is not protection, but just some kind of boot less than 1 millimeter thick.

Some car dealerships themselves offer to install full-fledged crankcase protection, while others, on the contrary, discourage this. The choice always remains with the car owner.

However, if you decide to replace the standard protection, do not be tempted by the inexpensive price of Chinese analogues: it is better to choose the best option in terms of quality and price in the Autocharm online store, which will last a long time and actually perform its functions. Let's remember all the pros and cons of installing crankcase protection.

– When hitting various obstacles, the engine crankcase protection takes on most of the loads;

– Small protection from dust and dirt of the engine and other units in the engine compartment.

– The ground clearance of a car with crankcase protection is slightly reduced (by 2-3 cm);

– In the event of a frontal collision, the protection may prevent the engine and other elements of the engine compartment from moving correctly;

– When performing maintenance at service stations, they charge an additional fee for removing and installing protection;

Review of Manufacturer Prices

*prices are current as of 10/11/18.

Original part included:

• protection;
• two/four mounting bolts, washers, groovers.

Recommendations for choosing an accessory for the Lada Granta Liftback

When choosing manufacturers, give preference to original designs. With a greater degree of probability, we can claim 100% compatibility of fasteners - bolt holes.

Purchasing custom protections does not always guarantee compatibility in terms of fasteners, width, and length. Often, owners independently finish the holes to fit the mounting bolts.

The choice of manufacturer depends on the owner’s decision and the cost of the part. Service center technicians recommend purchasing accessories with factory stamping and stiffeners. This design is stronger than all-sheet analogues.

Sequence of actions when installing crankcase protection Lada Granta Liftback

1. We place the car within the perimeter of the repair area, an inspection hole.
2. We provide priority safety measures: install wheel chocks, squeeze the handbrake.
3. We remove the plastic boot located in the standard structure above the sheet. It blocks access to the radiator of the cooling system, preventing its mechanical damage.
4. Along the perimeter, unscrew the four mounting bolts to “17” and remove the plate.
5. We put new armor in its original place and screw the structure on.

It is important to know!!! In the case of installing a long guard that covers part of the transmission, the fixation method is different. We put the rear eyes on the lower mount of the front suspension (silent blocks). First unscrew the nuts.

Grant crankcase protection

Nowadays, cars from domestic manufacturers are not very common on our roads. But in fact, some of them can compete with foreign cars in many respects, because they were produced specifically taking into account the condition of Russian roads. One of these cars is the Lada Granta.

This is a reliable and comfortable car that can easily withstand all the difficulties of our climate and road conditions. It is designed so that every element and system in it can perform its task as best as possible. But some parts that are not included in the factory configuration are nevertheless a necessity.

One of these parts is the engine crankcase protection.

Crankcase protection is needed to protect the engine sump from hitting rocks when driving over bumps and uneven road surfaces, as well as from water, dirt, dust, etc. getting into it.

Grant's engine protection will allow you to avoid unnecessary costs for repairing the car: it is durable and reliable, since it is made of thick steel, which is coated with a special polymer film. And the stiffening ribs provide additional strength, while the weight of the protection remains light.

Moreover, in this way you can protect not only the crankcase, but also other vulnerable areas of the car.

Installing crankcase protection for Lada Granta

Many Granta car owners prefer to service their car themselves.

However, even official dealers note that although it is quite simple to install the Grant engine crankcase protection, it is still better to entrust this to professionals who know exactly what and how to do so that the protection works properly. Installation of engine crankcase protection on Grant model cars is carried out as follows:

• They put protection on top of the standard boot - but not only for the sake of making it easy to remove and put back on. This also gives the engine additional protection from road dust and dirt.
• First you need to unscrew the bolts that secure the boot to the bottom of the car. They begin to install the protection system from its rear points, which are fixed to the boot.
• Then they install the front part of the crankcase protection, screwing it with bolts and securing it with nuts and a wrench.

Reviews

Conclusion

The oil pan protection on the vehicle must always be installed. At the personal discretion of the owner, this can be a standard design or a custom version made of polymer. Everyone chooses independently based on the cost of the accessory.