Raptor paint. Advantages and disadvantages

Scope of application packaging and packaging

Raptor paint for cars is a urethane coating that successfully replaces conventional spraying. The main advantage is high reliability. Painted elements are scratch-resistant, do not require polishing, do not fade or lose their appearance over time.

Having very significant reliability, the paint is considered elastic, easily bends along with plastic and does not crack when the alloy is deformed. Initially, the material was intended only for planes made of concrete or wood as a protective material (from moisture and destruction). The successful composition of acrylic and urethane provides the highest protection against rust, as well as resistance to automatic defects.

The Raptor is sold as a kit, which includes:

• detailed instructions for application;
• MSDS;
• 4 jars with the main substance, 750 ml each;
• liter jar of hardener;
• gun for correctly applying protection to the car body.

Each Raptor paint container is equipped with a thread for a sealed connection to the gun. The sets come in black and white and can be tinted following the instructions.

Protective body coating "Raptor" and rules for its application

The “Raptor” protective coating for a car body is made on the basis of polyurethane foam and after application forms a protective film, which has several positive aspects when compared with ordinary car paint.

They are:

• High degree of strength;
• Friction resistance;
• Resistant to most chemical elements;
• Easy cleaning;
• No fading when exposed to sunlight;
• Ensuring reliable protection of the body surface from corrosion.

But there are some disadvantages, among which are:

• You should not apply varnish over the coating, otherwise it will always be matte;
• The appearance of the surface resembles shagreen leather, which does not always look good in terms of aesthetics;
• If the painting technology has not been fully followed, chips may appear on the surface.

Packaging and equipment. Raptor is sold in special packaging, which includes 4 containers with the main working material, each with a capacity of 0.75 liters, and one container with a volume of 1 liter with a hardener. The kit also includes a specially calibrated anti-gravel gun, without which working with this material is simply impossible.

Bottles with this coating adapt to the pistol. The kit also includes instructions that contain all the required recommendations for its use.

Preparation. Painting a car with Raptor will not cause any difficulties for the average car owner, but will require some minor preparation work. If painting is planned over the entire surface of the body, it is necessary to remove all attached parts, namely bumpers, headlights, turn signals, side mirrors, etc.

The surface to be painted should be thoroughly cleaned to remove any corrosion and peeling paint.

Painting process. After the preparation work is completed, you can proceed directly to the painting itself. According to the information given in the instructions, it is necessary to combine the base material with the hardener in a ratio of 3:1. There is a special mark in the paint can indicating at what point the hardener should be added to obtain the mixture in an amount of exactly 250 grams.

The jar needs to be closed and its contents mixed for several seconds, which will allow the paint and hardener to combine well. Several hardener options are offered, with different hardening times, which suggests the possibility of selecting the required drying time. To reduce the appearance of structure on the painted surface, a special thinner should be added to the composition in an amount of 10%.

The cylinder is inserted into the gun with a hose from the compressor connected to it. Next, the first layer of paint is applied evenly. You need to start painting from the roof of the car using even movements, maintaining a distance of 40-50 cm from the gun to the surface to be painted, and ensuring that the layer is laid without overflowing.

When a layer of increased thickness is obtained, its mechanical strength decreases. In order for the first layer to dry, it will take from 30 to 60 minutes and a temperature of at least 20 degrees. After which you can apply the second layer.

Bottom line. After all layers of paint have been applied, it will need to cure. The use of the machine can be started within 12 hours, without causing high loads on the coating. When applying, ensure compliance with safety regulations and personal protection, as the material is very flammable.

• Exactly those feelings. Experience with Bridgestone Turanza T005 tires.

See all photo news >>

How to paint with Raptor

This paint has been on the market and in demand for more than 60 years. During this time, a reliable method of its application has been developed. Painting a car with Raptor will take several hours of careful application. All this can be done independently with your own hands.

What you need for painting

Before applying paint, you need to prepare the tools and materials that will be required during the work process:

• polishing and abrasive materials;
• hardener;
• primer on plastic;
• primer for metal;
• degreaser;
• solvent;
• putty;
• rags;
• adjustable gun.

Preparatory work

Preparing to paint a car requires a careful approach, since the paint adheres well to the surface. However, if the surface is poorly cleaned and degreased, the material will simply fall off after the polymerization period ends.

The preparatory activities are as follows:

1. Without exception, all hanging components from the car are removed.
2. Peeling paint and corrosion are removed.
3. The exposed metal is etched with a primer.
4. Dents will need to be straightened out.
5. The body is degreased with a cleaner.
6. Glass and other elements (rubber, chrome) that are not painted are covered with thick polyethylene.
7. Mix the dye with the hardener in a ratio of 3 to 1.
8. Before painting with Raptor, close the jar and shake thoroughly.

To reduce the surface texture, the manufacturer recommends adding up to 10% S2040 thinner to the paint container.

Considering the price of the material, it is recommended to fully follow the manufacturer's instructions and all standard preparatory work.

There is no need to save on materials. According to technology, up to 50 ml of S2041 toner can be added to the composition to make the texture thinner. However, many people add an ordinary solvent to the composition in erroneous proportions. Subsequently, such operations destroy the protective qualities of the coating, and the structure becomes less resistant.

Security measures

Painting must be carried out while observing personal protective measures. The passport supplied with the product indicates the main threats of the dye to humans. You should:

• beware of open fire;
• use eye protection - special. glasses;
• do not apply dye without gloves, protect exposed skin;
• use a respirator, as vapors can cause drowsiness and clouding of consciousness;
• the room where the work will be performed must be equipped with exhaust ventilation and a fire protection system.

Raptor paint is intended for professional use only.

Instructions for use

The Raptor painting technology is very simple:

1. Place a gun attached to a compressor onto the can, and then begin applying. Painting can be done not only with a spray gun, but also with an ordinary brush or paint roller. In the absence of certain skills, the layer will not be so uniform, and paint consumption will increase significantly.
2. You must first apply Raptor to the roof, holding the spray gun at a distance of 40 cm from the body.
3. After applying the first coat, allow the coating to dry for 30 minutes.
4. Apply a second coat.

Due to the granular structure, it is difficult to paint a car the first time: the layer is either very dense and looks uneven, or very thin and does not completely cover the surface, which leads to the formation of corrosion. To properly paint a car with Raptor, you should apply the coating in two layers.

The management states that you can work with paint outside - no draft, no sun, no dust will prevent the paint from setting. But it is more correct to paint in a covered, well-ventilated place.

Not all car enthusiasts are able to paint their cars with Raptor themselves. If in doubt, it is better to seek the help of professionals, since damaged components will result in a lot of wasted nerves and time.

Preparing the body for painting

Any car enthusiast can carry out painting, but for this it is necessary to carefully prepare the car. You can cover the entire car body or its individual parts with a layer of “Raptor”. First you need to remove all attachments from the car (headlights, mirrors, turns and bumpers).

After this, old paint and traces of corrosion are removed from all parts. Any through holes that appear must be carefully welded. To completely destroy rust, the metal is treated with phosphoric acid, the residues of which are washed off with water, after which the body is dried. The exposed metal of the body is covered with primer; if necessary, dents are straightened and puttied.

It is also useful to read: Which paint to choose for painting your own car?

Use coarse sandpaper to remove the glossy coating from the body, since the parts must be matte before painting. At this stage, you need to work carefully, since too sudden and rough movements can leave scratches on the metal. The body is degreased with alcohol-containing substances. Parts that will not be painted must be covered with protective material, secured with tape.

The instructions for using the paint indicate that the body surface can be painted outdoors, even with gusts of wind and exposure to sunlight. But it is better to paint a car indoors with normal air circulation.

If you follow all the rules for preparing for painting, the coating will lie flat on the surface, and rust will no longer affect the metal of the car.

Advantages and disadvantages

Benefits after painting a car with Raptor:

• Interior sound insulation increases;
• salt, rust and scratches are not harmful to the coating;
• It is possible to restore even damaged parts;
• the coating does not break, is resistant to external influences;
• combining the bumpy texture of paint with some colors can give a good result;
• Suitable for jeeps, trucks and pickups.

• fumes are toxic (until they dry completely);
• the surface of the car looks like an orange peel, which is not always adequately assessed;
• varnishing the coating is contraindicated - polishing is impossible, the car will always be matte;
• even an experienced painter who specializes in classic car painting does not always cope with the application - to do the job efficiently, a lot of experience is needed;
• if poor-quality soil was used, the Raptor may simply fall off;
• By painting the car with a bright and light shade, the dirt stuck in the bumps will be visible.

How much does the product and application procedure cost?

For a jeep, when painted in two layers, you will need 4 packages of Raptor, which will be approximately 25 thousand rubles. From 4 to 5 thousand rubles is needed for additional consumables. Plus collection, disassembly of the car, preparation and painting of the car with “Raptor”. As a result, the cost of painting will be from 60 to 100 thousand rubles.

Before painting the car body with Raptor, you should carefully prepare and read the instructions. If you are not sure that you will perform the procedure yourself with high quality, it is better to trust the service professionals. Removing a poorly applied coating will be a difficult and costly process.

The content of the article:

Welcome to the kuzov.info blog!

p, blockquote 2,0,0,0,0 –>

In this article we will look at what Raptor protective coating is, its advantages, preparation for application, the application and drying process.

p, blockquote 3,0,1,0,0 –>

Raptor is a trademark of U-POL. The full name of this product is U‑POL'S RAPTOR Truck Bed Liner, which means a cover for the rear bed (cargo compartment) of pickups and trucks. Initially, this coating was developed precisely for these purposes. Subsequently, Raptor paint began to be used everywhere, for painting both individual parts of the body and the entire body.

p, blockquote 4,0,0,0,0 –>

Raptor can be applied to areas most susceptible to wear.

Raptor is a 2-part paint, meaning it is mixed with a hardener before application. It has a urethane base, which gives this paint special strength, while it remains elastic and does not crack upon impact.

p, blockquote 5,0,0,0,0 –>

So, let's list the main advantages of the Raptor coating:

p, blockquote 6,1,0,0,0 –>

• Raptor provides an aesthetically pleasing appearance and can be applied in a variety of textures.
• Raptor protects against moisture, salts, and corrosion.
• Resists the effects of fuels and oils.
• Provides protection from UV rays of the sun and does not fade over time.
• Easy to apply, no high professionalism required, no spray booth required.
• Raptor resists scratches well (even from branches) and resists abrasion.
• It resists chipping well (provided the surface is properly prepared before application).
• Raptor helps absorb noise and vibration and can be used as underbody and arch protection.
• When used as a coating for the rear bed (cargo compartment) of pickups and trucks, it can be applied with an anti-slip texture (and additive).
• Raptor provides a finish that can withstand tough conditions. It can be applied to areas most susceptible to wear.

Safety precautions during operation

Like most dyes, Raptor paint has a certain negative effect on humans and a list of precautions:

• the material is flammable;
• when painting, irritation of the mucous membrane of the eyes may occur;
• in direct contact with skin may cause burning and dryness;
• Inhalation of vapors may cause dizziness.

In this regard, when carrying out work, we must adhere to a number of precautions:

• The room in which painting is carried out must be well ventilated. Additional mechanical ventilation is recommended during operation. It is necessary to take frequent breaks and go out into fresh air, and use safety glasses and a respirator while working.
• Smoking is strictly prohibited; paintwork materials should be used away from open flames.
• All material that came into contact with the paint (brushes, rollers or rags) must be folded and stored in a separate container, and after finishing work, fill it with water until completely covered.
• Paint should not be spilled, and painting work must be performed in special clothing.
• The paint is stored in a separate, dark place that is difficult for strangers to access. The optimal temperature for storage does not exceed 80°C. All containers must be tightly closed.

Raptor is the optimal solution for those whose car is an indispensable assistant in all areas of activity. Constant use over time results in all kinds of damage to the body, especially for SUVs. This protective substance can increase the degree of stability of the body and significantly extend its service life.

Raptor coating process (2 videos)

Raptor products and the result of its use (26 photos)

DIY raptor painting

p, blockquote 7,0,0,0,0 –>

• After stirring, the bottle is screwed to the gun, which, in turn, must be connected to a compressor. You need to adjust the pressure to 2.5–5 atm, depending on the desired texture. Lower pressure will produce a coarser texture, and higher pressure will produce a finer texture.

• The distance and speed of the gun will also affect the texture.
• Adding thinner (up to 10%) will give a smoother finish. For this, it is better to use a special thinner, but a universal acrylic thinner will also work. It is not recommended to use solvents as they will weaken the properties of the coating.
• Experiment with pressure settings and do a test spray on cardboard to find a texture you like.
• Recommended distance is 40–45 cm (up to 150 cm). A closer distance will produce a larger texture.
• You can read about how to make passes with a gun when spraying and about the basic principles of painting in the article “Car painting technology.”
• The time required to spray diluted Raptor is 60 minutes.
• If more than 5 hours have passed since applying the layer, then before applying the next layer you need to sand the surface a little.
• U‑pol recommends applying 2–3 coats of Raptor. More than 3 layers are not recommended.
• Subsequent coats can be applied with a 60 minute drying period between coats.
• Between changing bottles, the gun must be washed for trouble-free spraying. Immediately after use, the gun must also be washed. The gun can be washed with either solvent or acetone.

Drying the Raptor coating

Raptor dries touch-free in 1 hour. After 2-3 days you can use it with caution. After 7 days, the surface painted with Raptor is completely ready for use. Drying can be accelerated by increasing the temperature (60 degrees), but complete hardening will also occur no earlier than 7 days.

p, blockquote 10,0,0,0,0 –>

It is not recommended to infrared dry the Raptor.

p, blockquote 11,0,0,0,0 –> p, blockquote 12,0,0,0,1 –>

Many car owners want the attractive appearance of the body to be preserved for as long as possible. Dirt, scratches, flying stones - all this negatively affects the protective paintwork of the body. Cracks, scratches, chips appear, and then rust. This is especially true for off-road driving enthusiasts, who care not so much about appearance as about protecting the body from corrosion.

The body can be protected using galvanic coatings, galvanizing and special primers. But all these methods are not effective and durable enough. Therefore, many people turn to using Raptor coating. Raptor car paint protects the body from exposure to water, sand, stones, and gravel. With such a coating, the car is not afraid of difficult operating conditions, so the Raptor is ideal for off-road vehicles.

Protective coating "Raptor"

Raptor is a 2-component polyurea elastomer (polyurea) of increased strength. The Raptor coating, due to its composition, allows you to obtain a seamless elastic insulating coating.

Raptor car paint protects the body from mechanical damage, corrosion, reagents, mold, and temperature changes.

The composition is also used to restore worn body parts. After applying the Raptor coating, a protective layer of increased strength is formed on the body, which protects it from exposure to water, mechanical damage and ultraviolet radiation.

Packaging, accessories and color

You can buy Raptor for car painting in a specialized store or online. Raptor car paint is sold in standard packaging - 4 0.75 liter bottles, plus 1 1 liter bottle of hardener, which is used to fix the paint. The material of this kit is enough to cover up to 10 square meters. m. of flat surface in one layer. Kits with a paint spray gun are also sold. It is used when it is necessary to ensure an even coating. If you want to paint the sides or bottom, then the paint can be applied with a brush.

The Raptor is available in two colors – black and white. The most popular color is black. If you need a different color, buy white paint and mix it with the desired color.

Advantages and disadvantages of coating for cars

This polyurethane coating is a product that has been successfully developing coatings for car bodies for more than 60 years. Painting with raptor forms a protective coating that can protect the paintwork of an SUV body, for example, a Niva, from damage.

The main advantages of the substance include:

• excellent durability of the resulting film on metal;
• coating resistance to intense friction;
• resistance to chemical attack;
• Raptor pol does not fade from sunlight;
• providing such useful properties as anti-corrosive and anti-gravel.

At the same time, raptor sex also has its drawbacks. The main ones should be highlighted:

• painting the floor with raptor does not provide for subsequent varnishing, because of this the car body will always be matte;
• the surface of the metal after applying a coating with anti-corrosive and anti-gravel properties takes on the appearance of an orange peel, this does not always make the car aesthetically pleasing;
• If the rules of coating are violated, chipping may occur in the future.

Useful! Despite its shortcomings, this coating still protects metal better than most car paints. The body of a Niva or other SUV will have better resistance to rust.

Advantages and disadvantages of paint

Before you decide to paint your car with Raptor, you should take into account all the nuances and weigh all the pros and cons. Let's talk about it. Raptor painting reviews, pros and cons.

The advantages of Raptor auto paint are as follows:

• No special qualifications are required for application; it can be applied manually with a brush or gun;
• The coating increases the sound insulation of the body;
• Raptor paint for cars protects the body from moisture, reagents and extreme temperatures, etc.;
• The coating protects the body from corrosion;
• The composition is easily applied to various types of surfaces, metals and other materials, has a high degree of adhesion;
• No special room or conditions are required for application; you can even paint in the garage;
• Various application methods: gun, roller, brush;
• No careful preparation of the body is required before applying paint;
• Cost reduction of 20% compared to traditional coatings due to reduced application time and longer service life.

Flaws:

• Only one type of surface is possible - matte;
• Inherent roughness of the coating;
• The composition gains full strength only 21 days after application;
• It is difficult to remove from the surface if necessary.

Application technology

The Raptor painting technology is quite simple and can be done by any car enthusiast, but it requires preliminary preparation.

What is required for application

1) Materials

To apply Raptor, you must prepare the accompanying materials in advance. The technological process of coating requires the use of abrasive and polishing materials, hardeners, adhesive primers for plastic, acidic primers for metal, branded degreasers and solvents, putty, rags, etc.

2) Pistol

Also, for proper, even application of Raptor, a proprietary pistol is required. This gun is very similar to a regular anti-gravel gun, but has a number of differences. The most important difference is the ability to adjust the size of the “pimples” or shagreen when applying the coating. With this gun you can create a smooth matte finish.

3) Quantity of materials

The final quality of painting largely depends on the correct choice of consumables. It is best to entrust the selection of these materials to a competent specialist. To determine the amount of materials, you need to make some calculations. The quantity and composition of consumables depend on the area to be painted, the number and thickness of application layers.

Safety precautions when working

The product data sheet states that Raptor car coating is a flammable material, irritates the eyes, causes dryness and burning upon open contact with the skin, and vapors from the composition can cause clouding of consciousness. Therefore, as with any other painting, when painting a car with Raptor, all safety and personal protection measures must be observed.

General safety precautions when working with paint and varnish products (including Raptor car paint):

1. The room where painting work is carried out must have good, proper ventilation. The room should be ventilated as often as possible. If the premises are insufficiently ventilated, you should work in them for a strictly limited time and use protective equipment: gauze bandages, respirators.
2. Smoking is prohibited in these premises.
3. The use of open fire is prohibited.
4. Used materials must be kept in separate containers. Used rags should be filled with water.
5. It is important to keep the room clean and avoid spilling paint materials.
6. Work must be carried out in special clothing, rubber gloves, a respirator and safety glasses.
7. Paint and varnish materials must be stored in a dark, separate room, inaccessible to unauthorized persons. Optimal conditions: 7-8 degrees Celsius. Any container must be tightly closed and labeled.

Painting stages

Painting a car with Raptor takes place in several stages:

For high-quality application, the Raptor coating needs a smooth, prepared surface. The paint can be applied to any surface – plastic or metal.

Before applying Raptor paint, read about how to remove rust from a car body.

To prepare the surface, do the following:

1. Disassemble the body: remove bumpers, mirrors, wheels, etc.
2. Clean the surface of the body, remove old layers of varnish and paint;
3. Clean body parts from corrosion, where required, and process thoroughly;
4. Putty the uneven areas, cover up the corrosion areas and sand them;
5. Prime the surface, preferably using ACID acid primer;
6. Wait several hours until the preparation is completely dry.

• Painting

Preparation of the composition. Before applying paint, you need to prepare the composition. A hardener is added to the paint in a ratio of 3 to 1. That is, 250 g of hardener is added to 750 grams of paint. The mixture must be stirred for several minutes, or simply shake the jar.

Painting work must be done in a box or garage with good lighting. What to do:

1. First paint the inside of the body with the prepared mixture to see how the paint adheres;
2. After making sure that the Raptor lays flat and well, paint the entire body;
3. Let the paint dry.

After a few hours, you can assemble all the car parts in place. In the first days, it is best to use the car in urban conditions, and only after 14 days, when the composition gains strength, can you go off-road.

We recommend watching: DIY Raptor painting video

Precautionary measures

"Raptor" as a car paint requires special precautions when used. The technical data sheet indicates the types of danger that the substance poses to humans:

• easy flammability;
• irritation of the mucous membrane;
• the appearance of cracks in the skin during open contact;
• dizziness and drowsiness caused by paint fumes.

It is also useful to read: Technology of painting a car hood and eliminating shagreen

When painting a car body, you must wear gloves, protective clothing, goggles, and a respirator. If painting takes place indoors, you need to take care of its fire safety and good ventilation. Children and animals should not be nearby.

Conclusion

Raptor is an excellent solution not only for off-road enthusiasts, but also for car owners of all categories. The Raptor coating protects the car body from aggressive environmental influences, this is especially true for regions with sudden temperature changes, and from mechanical damage. You can also use Raptor to restore the body from corrosion. Painting with Raptor paint saves money and keeps the car body in excellent condition for many years.

Share your information and tips in the comments, and you can also share this interesting article with your friends on social networks!