Car roof rack 2110 installation

Let's start installing the roof rack on the VAZ 2110

You need to start installing the roof rack by attaching supports for installing cross beams on the roof of the car. The supports must rest against the seals to avoid damaging the doors and paintwork.

Next, you need to extend the handle and turn it clockwise until the support and the body are tight enough. Now you need to repeat the same with the second support. It is important not to twist the handle; it is advisable to ensure that there is the required tightness of fastening on both sides of the roof. The measurements between the beams should be the same throughout. Now you need to attach a service box, with which various cargo will be transported, regardless of weather conditions. In addition, the models usually have an impact-resistant coating. And the lock will protect against unnecessary removal of the box.

The VAZ 2110 roof rack is a universal roof box, usually with a volume of 350 liters with a maximum load of 50 kg. As a rule, it has a lock and spring-loaded stops, thanks to which the lid will be kept open, which significantly increases convenience.

Installation of the universal roof rack Ant on the roof of a VAZ 2110

The design of the additional luggage compartment is used by car enthusiasts due to its versatility. It makes it possible to install luggage racks in all known ways. Ants are not inferior to similar foreign equipment. Three modifications are available.

D-1 is mounted in the doorways of 106 car models. The adapter and stand are equipped with rubberized gaskets that protect the paintwork from damage. Transverse steel arches of square section 20 * 30 mm. Applied black coated. Static load 75 kg.
D-2 is produced for 20 models and brands of cars. The characteristics are similar to D-1, with the exception of high-strength steel.
S-15 is fixed into factory sockets with threads. The crossbars are made of similar metal and protected by a rubber sheath. Recommended for use on inexpensive foreign cars.

The Ant is secured in the following sequence:

What you need to install

To buy a trunk for a VAZ, you need to visit an autoloader or place an order online. For any of the above types of purchases, it is important to choose a device that fully matches your car model. Before you buy a trunk

, think about what you will carry with you. The size of the box will directly depend on the size of the cargo.

Another important detail. the material from which the device is made. The best option is galvanized steel. It may be covered with rubber or plastic. But if the box itself is made of soft material. this is bad. This product is not durable and will quickly deteriorate if heavy loads are transported frequently.

Features of choosing and installing a roof rack for a VAZ 2110-2112

When choosing a car, trunk capacity is an important factor. For LADA 2110 this figure is small. The average volume is 450 liters, but it all depends on the configuration of the car. If you are satisfied with dozens of other characteristics and the question of moving large-sized cargo remains open, the solution to the problem will be a roof rack on the VAZ 2110.

There are many variations of VAZ luggage racks, differing in capacity, material, nuances of functionality and method of fastening. Therefore, you need to be able not to get lost in the variety and choose the necessary modification.

It will be useful: How to check the pump without removing it from the engine with your own hands

Installation of a roof rack on a car on a VAZ 2110

installing a trunk on a vaz 2110

This will be fine if you purchase a unit that has a trunk lock and an impact resistant cover. Such options, in tandem with belts for internal cargo securing, will keep the barrel intact and safe even under heavy braking and unforeseen situations on the road.

VAZ 2110 owners should remember that their car does not have drainage gutters on the roof. Therefore, when buying a roof rack, pay attention to whether it can be installed on the edge of the roof. There is no need to go to a car repair shop to install the trunk. This manipulation can be performed on its own.

Installation of roof rails on a VAZ 2110

A roof rack, or rather, many of its models, can be installed on a car without roof rails, but since they allow you to change the appearance of this device and can themselves be used to transport different cargo, you can consider the option of installing them.

Plastic roof rack "tens"

To install this product yourself you must:

Remove the car's headliner; these structures almost always come with installation instructions without removing the upholstery. But this does not guarantee at all that the installation will be carried out on roof reinforcements. And if this is not done, then the load on the roof rails and the air flow resistance will simply bend the roof of the “tens”. Therefore, the upholstery must be removed;
Make roof reinforcements yourself. The optimal dimensions are 100x80 mm; any metal 2 mm thick will be sufficient. After manufacturing, they are bent to the shape of the VAZ ceiling and glued with epoxy glue (you can use the usual “Moment”);
The roof rails must fit tightly to the roof without any gaps. Otherwise, there will be rainwater in the cabin, so you need to do a preliminary fitting before installation.

If the fit of the product to the surface is not tight, then it is necessary to eliminate the gaps using a file. Rails are usually made of aluminum alloy, so the task is not difficult and will not take much time.

The kit always contains gaskets; the usual material for their manufacture is plastic, so you definitely need to pay attention to their design; if you find sharp edges, you should replace them, they can easily scratch the roof of the VAZ. Homemade rubber ones from an old camera or other similar material are perfect.

After the imperfections are eliminated and the glue dries, holes are drilled in the roof and glued plates. According to the instructions, there should be 8 of them (2 for each device mount), but experience shows that 4 holes will be enough and these actions will not affect the quality of the mount;
Install the roof rails, fasten them with bolts and washers (from the interior side).

At this point, the installation of the presented devices on the roof of the VAZ 2110 is completed (when there are incomprehensible moments, the photo will help you figure it out), if they ever cease to be needed, then it is easy to dismantle them and eliminate traces of holes.

What to look for before buying a roof rack!

You can buy the VAZ 2110 roof rack you like in a regular store or on the Internet, the main thing is to make sure that it is made of metal of sufficient rigidity. If this point is not taken into account, after a short time the insufficiently strong trunk, under the influence of loads, begins to deform and will have to be replaced. The optimal material is galvanized steel.

It will be useful: Instructions for installing Webasto yourself

Rails for installing a luggage rack

To install on the roof, the trunk must have a coating resistant to mechanical damage, a lock, and straps for securing the load. This will ensure the integrity of the transported items during sudden braking.

Installation of trunks

To install the download yourself, follow the sequence.

Attach supports to the roof of the vehicle When working, make sure that the supports are positioned exactly on the seal. Otherwise, you will damage the paint on your car.
Now you need to expand the adjustment handle. To do this, carefully hold the support and turn the handle from left to right until it fits snugly against the car body. It is important not to twist it, otherwise the beam may bend.
Repeat the procedure with the second support; to do this, it is recommended to go around the “iron horse” on the other side.
When working, make sure the geometry is safe. The primary condition is the even installation of the transverse beam. After installation, check how well everything is installed on both sides of the car.
Do the same for the second cross beam. It is then recommended to measure the distance between the two installed elements. This indicator must be unified at all points. In the photo you can see what it looks like.
Once the base underneath the structure is secured, you can begin installing the box, which will allow you to transport various goods regardless of the weather outside.
Installation completed.

Such a roof rack will increase the volume of the car’s luggage compartment, does not clutter up the car’s interior and makes long trips pleasant for passengers.

Features of choosing and installing a roof rack for a VAZ 2110-2112

It will be useful: How to reduce engine sound: do-it-yourself sound insulation

what do you plan to transport,
what is the mounting system of your car?

Depending on the purpose of transportation, there are:

Open trunks are suitable for transporting large, bulky or dirty cargo over short distances. They are a rectangular base with fastening elements. They are budget-friendly, but they reduce the aerodynamics of the car and, accordingly, increase fuel consumption.
Closed trunks - used for frequent long-distance trips and in cases where it is necessary to protect luggage from adverse conditions, moisture, dust, etc. They have the form of baskets or boxes - closed containers. One of the advantages is increased aerodynamics, and the disadvantage is high cost.
Specialized racks for transporting sports equipment (bicycles, skis, etc.) - narrow functionality. Most often it belongs to the middle price segment. Aerodynamics are reduced due to the specific shape of the load. The installation is noted to be difficult.

Depending on the mounting method, VAZ luggage racks are:

standard – installed on the roof recesses, according to the car manufacturer’s instructions,
roof rails,
integrated roof rails,
attached to the doorway - this is how a roof rack is installed on the roof of a VAZ 2112, 2110,
with mounting on a T-shaped profile,
with gutter mounting,
on magnets - rare, has a relatively low load capacity,
through the interior (inflatable trunk).

This does not limit the process of selecting a luggage rack. It is important to pay attention to the material of manufacture. You don't have to settle for soft metal car racks. Preference is given to steel types with galvanized coating or high-quality plastic.

Also, consider the manufacturer's reputation. And the option remains to make a VAZ roof rack yourself.

Eurodetail

One of the largest companies in the country for the production of luggage systems is Eurodetal. It has been on the market since 1998. Production is entirely based on the company’s own developments and uses materials only from Russian partners. The assortment is rich, there are luggage racks for almost any modern car.