Largus rear bumper removal video

Why dismantle

There may not be many reasons for a driver to remove the bumper on his car. It is not at all necessary to contact a service center for this, where you will have to pay a considerable amount for repairs. Everything can be done with your own hands. Why the driver may need to remove the bumper:

Breakdown – this happens as a result of a traffic accident or improper parking. It happens that the part itself is intact, but the back panel requires repair.
Painting – requires dismantling for better painting of the body.
Body improvements - installation of a new bumper, etc.
Installation of additional accessories, for example, parking sensors, etc.
Installation of overlays, etc.

Possible reasons for removing the bumper

The reasons for dismantling can be very different, but the main one remains physical damage. Many people have come across this concept. So, let's look at the cases in which you will have to remove the front bumper on Largus:

Road accident

Front bumper on Largus after an accident

Read more: Engine D 240 spare parts catalog

Clearance at the front bumper point

All these and other reasons may be a reason to remove the bumper on Largus.

Replacement

Lada Largus Logbook DRL from standard Largus lamps
The car received a proven and recognizable body. The Largus bumper is a high-tech solution, but it can also get damaged and break. Dismantling is necessary to carry out repair work on the body element itself or the parts that are hidden behind it. Removing the part is not as difficult as it might seem.

Removing the rear bumper

To work on a car you always need some tools. It is not difficult to remove the bumper, but for this you need at least a minimum set (usually every car enthusiast has one in the garage). We will need:

Head 10;
Nozzles type T20 and T30;
For rear bumper: flat head screwdriver (clip removal tool).

It is not at all difficult to remove the rear bumper of the Lada Largus.

Attention! The whole process will take no more than an hour (you can complete it in half an hour, everything will depend on the skills of the master).

First you need to prepare a workplace and all the tools. Next, provide free access to the bottom of the car. Drive the vehicle into the pit or lift the body with a jack (you can do without lifting, but in this case it will take more time and effort to dismantle).

The process of removing the Largus rear bumper:

The first step is to detach the fender liners from the base. Take a 10mm socket and unscrew the fixing screws on the back (2 pieces on the right and left of the fender liner). Under the fender liner there are screws connecting the part and the rest of the body. Unscrew them. The next step is more difficult. You have to remove the lights. The part cannot be dismantled together with them. Unscrew the screws that connect the bumper and amplifier. There are 4 screws between the seal on the trunk and the part; they need to be removed (they secure the buffer on the rear panel)

Carefully, using a flathead screwdriver, remove the fasteners from the side. We disconnect the edges of the front side from the wings

With a smooth movement down and back, remove the buffer.

You can install the part in reverse order.

Removing the front bumper

Usually the front bumper of the Lada Largus is removed if it is necessary to carry out body repairs, replace an element, or gain access to parts. Also, the part is dismantled when removing the radiator grille, which is built into it. Its cladding is designed as one piece with the bumper.

Tools:

Mounting blade;
Flat screwdriver;
Key with 10mm head;
T30 nozzles.

The process of removing the Largus front bumper:

Unscrew the three screws securing the front lower part of the side motor splash guard (they need to be pulled out).
Take the tool, pull out the core from the retainer of the rear securing part of the mudguard and remove the retainer itself.
Remove the piston by removing it from the mudguard mounts with a tool.
Disconnect the two parts of the mudguard (upper and lower) and remove the upper one.
Remove the fender liner.
In the same way, release and remove the lower mudguard and the right fender liner of the car.
On the left side there are wires stretched to the fog lights; disconnect the block.
Remove the screws securing the bottom of the lip to the subframe at the front of the car.
Near the wheels (on both sides in the arches), unscrew one fastening of the side parts of the bumper, which are connected to the wings (they need to be separated).
Release the top by unscrewing the 4 screws along the edge connected to the radiator frame.
The rear corners need to be pulled downwards to take the stops from the holes that secure the bumper along the lower edge.
Point the sides forward and dismantle the part.
The wire feeding the fog lights can be removed if it is in the way.
Unscrew all the screws securing the headlights (4 pieces each) and remove them.
By pulling out certain plastic fasteners (located on the inside of the body), you can remove the radiator grille, headlight trim, air guide shields, and lower grille.

After the work has been completed, the bumper is installed on the car in the reverse order.

Removing the bumper is not difficult; any driver can do all the work independently, without the help of a service center. However, for this you must have at least basic knowledge of working with a car.

How to change wheels on Largus
Fuel filter Chevrolet Lanos
Peugeot Boxer fuel filter
How to change filters in Mitsubishi ASX: cabin, air, fuel

Rear bumper

Required : Torx T20 and Torx T30

Instructions:

Remove two screws No. 2 securing the fender liner to the bumper (on each side);
Unscrew the five No. 1 screws of the lower bumper mounting.

Unscrew eight bolts No. 1 of the upper bumper mounting;
Remove the sidewalls of the bumper from engagement with the side brackets No. 1. Remove the rear bumper by pulling it towards you.

Installation is in the reverse order. The process is almost the same with the Renault Logan car (on Largus you do not need to remove the license plate light):

Let us remind you that the Largus body kit can be modified, for example, installing a mesh in the front bumper to protect the radiator from midges, and installing a trim on the rear bumper to protect it from damage to the paintwork during loading/unloading of the trunk.

Keywords: Lada Largus bumper

Found an error? Select it and press Ctrl+Enter..

If your car needs a body kit replacement, it will be useful to know how to remove the front or rear bumper on a Lada Largus. Dismantling will also have to be carried out to repair or replace the kenguryatnik.

Body repair Lada Largus Lada Largus in St. Petersburg

Lada Largus Sound box Logbook Fuel consumption

Lada body repair in SKR is a high-quality and inexpensive repair. At the Body Repair Station, Lada cars are constantly dealt with. We have extensive experience working with this brand, which allows us to easily carry out all repair work on the body and more. Lada body repair is not particularly difficult for us. We are used to working with spare parts for this car. And we will tell the car owner which Lada body parts are best to purchase. And if you want to achieve the highest quality results in repairing Lada cars, leave all the hassle of selecting spare parts to us. Our craftsmen personally inspect spare parts and select the most accurate stamping possible. This allows you to achieve a good final result in the repair. If you are interested in the cost and timing of Lada body repairs, call tel.

The owner of a Lada Largus car came to our car service center to assess the cost of damage. Our master examined the car and assessed the external damage to the body, naming the price. The client was satisfied with the price, and he left the car in our car service center.

Lada Largus has features that do not allow internal damage to be assessed. The bumper with radiator grille tightly covers the entire internal structure. But based on the nature of the impact and external damage, we assumed that the bumper reinforcement remained intact. When removing the bumper, it turned out that the amplifier was damaged, the bumper was a plastic element and after the impact it simply snapped back into place. The amplifier on Largus is not a separate element, but part of the structure, it became clear that the cost of repairs would change. We invited the client to a car service center in order to show the internal damage and agree on further actions. They quoted the full amount of repairs, taking into account all hidden damage, and the client agreed to continue the repairs.

Body repair of Largus consisted of the following work:

Hood repair and painting
Replacing and painting the front right fender
Replacing the right headlight
Front bumper - replacement and painting
Front bumper reinforcement - replacement and painting

Repairing the Largus bumper did not make sense, since the price of a new bumper is much lower. There is an option to buy a bumper directly in color, but such elements may have an error in tone and will stand out against the background of the factory-painted body.

The renovation of Largus was carried out efficiently. All elements were painted to exactly match the tone of the body. Further operation of the Lada Largus is possible immediately after completion of the work.

Largus spare parts are not expensive, for this reason it is sometimes more profitable to replace even something that can be repaired. We easily found all the necessary elements and delivered them to the car service center. The client did not have to waste time on the process of purchasing spare parts.

The Lada repair was completed on time, all work is guaranteed. Service of Lada Largus is also possible in our car service center, about which the client was informed.

You can find out how much any repair costs by calling or sending your question through the form on our website:

You can estimate the cost of the work by sending us a photo by email [email protected]

In SKR there is an opportunity to purchase spare parts for your car. All spare parts are ordered to our customers at purchase prices. The price for any repair in our car service does not exceed the price for a similar repair in any other car service. There are a lot of car repair shops offering Lada car repair services in a city like St. Petersburg. But high-quality repairs, combined with a wide range of repair services, are practically non-existent.

SKR is a high quality Lada repair in any area of car repair!

Contacts:

The SKR body repair station is located in St. Petersburg, on the street. Novorossiyskaya, 53 Lit.B, on the border of the Vyborg and Kalinin districts. The nearest metro station is Ploshchad Muzhestva.

Address: St. Petersburg, st. Novorossiyskaya, 53 Lit.B

Telephone:

Every third owner of Lada Largus was faced with the need to dismantle the front bumper. Not every car enthusiast is able to do this, because he is not an expert in this field or simply does not have the necessary knowledge.

Video about removing the front bumper on a Lada Largus and installing a radiator mesh:

Removing the front bumper on Lada Largus

Lada Largus McQueen Logbook Replacing 5th gear gears

The process of removing the bumper is simple and does not require special knowledge. If you follow the instructions, this operation will take about half an hour.

Necessary tool

Of course, no repair work is complete without tools. To remove the front bumper you will need a minimum set: a flat-edge screwdriver, a 10-mm wrench and a T30 socket. All this can be found in tool kits, which are recommended to have in your car, just in case, or borrow from your neighbor in the garage.

Dismantling process

So, let's look at the step-by-step process of dismantling the front bumper:

Before you start this simple task, you need to prepare. It is best to place the car on a lift, but at worst, you can use a pit.
Now let's move on to the dismantling process itself. Remove the lower plastic protective mudguard. To do this, unscrew the fasteners that are located in front. The back and middle parts are attached to plugs that can be removed using a special tool or screwdriver.
Now, you need to unscrew the front fender liners from the bumper.

Now the front bumper has been removed from the car, and the necessary manipulations can be carried out.