Car gadget holders are most often attached to the windshield using “suction cups” with a plastic clamp that prevents the vacuum membrane from losing pressure. For example, a video recorder, radar detector, tablet with navigation maps, or other mobile device are hung on them. However, due to dirt on the glass or due to inhomogeneity of the rubber, the suction cup peels off, and the large console, along with the gadget and wires, flies to the floor of the car. This is unpleasant, since to re-install it you need to stop at a special place to rest or taxi to a gas station, which is associated with a loss of time. In addition, a dropped tablet can break or distract the driver from the road. How can you attach the console more tightly to the glass so that it lasts for several days?
Article on the topic Safe and convenient. How to attach a smartphone to the front panel of a car?
Degreasing and silicone
Even new and high-quality fasteners do not adhere well to dirty glass. Therefore, before use, it must be washed from the inside and degreased. This is done using special chemicals. After wiping the glass with a soft towel, it doesn’t hurt to apply a layer of alcohol and wait for it to dry, for which you can use disposable wipes or ethyl alcohol.
The vacuum rubber membrane can also be degreased and then rubbed with silicone grease. It is necessary to treat its external surfaces to prevent moisture and air from entering through the pores of the rubber. You can use clear plumber's silicone. But you cannot apply too much of the product, otherwise a film will form between the glass and the rubber, from which the mount will slide off.
Does the suction cup fall off the tile? We offer affordable methods of reliable fastening
There are many decorative and functional tile suction cups on the market. They look interesting, are inexpensive and greatly simplify the organization of space. The only negative is that if applied incorrectly, the Velcro quickly comes off. In this article we reveal the secrets of reliable attachment of the accessory.
What is the problem
Fastening household items using suction cups is very convenient and fast, since no additional devices such as a drill or glue are required. Removing the annoying accessory will also be quite simple. Typically, towels in the kitchen and bathroom, soap dishes, hooks for washcloths, small shelves, etc. are placed in this way. Such items weigh a little, but vacuum Velcro does not need to withstand weight.
Why is it not always possible to attach the suction cup to the tile for a long time ? Almost always the problem is unevenness of the surface. Lumps, cracks and other defects on the tiles weaken the vacuum structure. Uniformity and smoothness of the tiles is the main condition for a strong connection. Try to choose the most suitable areas. The best option is glossy tiles.
Advice Do not try to glue the suction cup to a textured surface, for example, a tile with a pattern. Matte surfaces are also not the best solution: small pores weaken the suction cup.
Under pressure from heavy objects, the hooks on the suction cups quickly fall off. Correlate the size of the item and its purpose. For example, a large terry towel will be an excessive load for Velcro with a diameter of 1-2 cm.
The shape of the suction cup must also be correct - even and round. The microclimate in the bathroom or kitchen also plays an important role - constantly high humidity. This problem is difficult to fix, but try fixing plumbing leaks and ventilating the room more often.
So, what will determine the strength of the vacuum suction cup?:
- From the integrity of the material and the presence of defects.
- The relationship between the size of an object and its purpose.
- On the quality of the surface material.
How to attach: instructions
A couple of tricks will help you cope with the task. These are not exactly standard methods of attaching suction cups, but they give long-lasting results.
How to glue Velcro securely, all stages:
- First, degrease and wash the surface. Remaining dirt significantly reduces the stickiness of the suction cup. To degrease the tile surface, use a regular soap solution. Another way is to wipe with alcohol.
- Degrease the Velcro surface as well.
- If the suction cups come with mugs with a sticky side, do not neglect them: they will make the attachment stronger.
- Place the suction cup on the cleaned wall and apply maximum pressure.
You can attach suction cups to bare tiles, but the result will be short-lived. It is better to make additional mugs yourself or look for them complete with suction cups. To make it yourself, you will need self-adhesive polyethylene film, which is used for office purposes - for laminating paper without heating. Just cut out circles of the appropriate size, stick them on the tiles, and only then attach the hooks.
An easy way to improve the quality of adhesion is to apply an additional layer of Vaseline or a cream of similar consistency to the inside of the suction cup. This substance is safe for various surfaces. The method is used for further placement of light objects on suction cups.
We use sealant
Transparent silicone sealant will be invisible under the hook; it is much more convenient than a drill or a suction cup that constantly comes off. Sealant is a last resort; this method is recommended for future heavy loads on Velcro. It is worth considering that the sealant will not allow you to move the suction cup - it becomes disposable.
Laundry soap
If the “suction cup” falls off on the way, and there are no special products at hand, then you can use regular soap. You need to moisten it a little with water, rub the rubber generously and wait until it dries. When the soap acquires viscosity, you can attach the membrane to the glass and tighten the console clamp. The soap will set and prevent air penetration, like a thick sealant.
Guiding thread. Which is better: standard navigation or a simple smartphone? More details
How to attach a suction cup to tiles: methods of attachment
To securely attach the suction cup, you need to be confident in the quality of the material from which it is made. If even the slightest roughness is found on the suction cup, this may indicate that the material was manufactured using the wrong technology. Such suction cups often come off, which creates great discomfort for the owners.
Before purchasing Velcro, it is important to pay attention to the quality of the tile itself. It will not be possible to attach Velcro to embossed tiles.
Velcro adheres best to tiles with a glossy surface. The matte surface has pores that weaken the Velcro fastening. It is not advisable to attach Velcro to raised protrusions, tiles with various defects, or to glue particles - all of them will contribute to the suction cup coming off. It is important that there are no chips or cracks on the surface of the tile.
Mounting methods:
- Use alcohol to degrease the tile surface.
- Apply Vaseline or other similar products.
- Place PVC film, which has a self-adhesive backing.
- Strengthen the suction cups with silicone sealant.
The choice of method depends on what object the suction cups will hold. The weight and dimensions of the product should be taken into account. It is important to remember that in order to securely attach the suction cups using any of the methods, you must first thoroughly clean the surface of dirt.
Soda and garlic
Sugar syrup or regular soda can also be used to create an adhesive surface. The main thing is to look at the label before use and evaluate the amount of sugar it contains. If there are more than 400 calories, then the sugar will exhibit the properties of glue when it dries. Next, you can wipe the area of the windshield where the console should hang with the drink, and also apply a few drops to the rubber. After drying, the rod can be attached to the chosen location.
If you don’t have sugar syrup or lemonade on hand, you can use any sugar-containing product. It could be pieces of fruit or even garlic. When dried, its juice has an adhesive property. It can also act as a sealant.
How to attach a suction cup to tiles: methods of attachment
To securely attach the suction cup, you need to be confident in the quality of the material from which it is made. If even the slightest roughness is found on the suction cup, this may indicate that the material was manufactured using the wrong technology. Such suction cups often come off, which creates great discomfort for the owners.
Before purchasing Velcro, it is important to pay attention to the quality of the tile itself. It will not be possible to attach Velcro to embossed tiles.
Velcro adheres best to tiles with a glossy surface. The matte surface has pores that weaken the Velcro fastening. It is not advisable to attach Velcro to raised protrusions, tiles with various defects, or to glue particles - all of them will contribute to the suction cup coming off. It is important that there are no chips or cracks on the surface of the tile.
There are several ways to attach the suction cup to the tile, which you can choose at your discretion.
Mounting methods:
- Use alcohol to degrease the tile surface.
- Apply Vaseline or other similar products.
- Place PVC film, which has a self-adhesive backing.
- Strengthen the suction cups with silicone sealant.
The choice of method depends on what object the suction cups will hold. The weight and dimensions of the product should be taken into account. It is important to remember that in order to securely attach the suction cups using any of the methods, you must first thoroughly clean the surface of dirt.
Reasons for poor fastening
There are several reasons why the suction cup may become detached.
The most common among them are:
- glass surface contamination;
- violation of the rules for installing an element;
- strong heating under the sun's rays;
- poor quality of the suction cup itself;
- uneven abutment surface.
The exact cause can be determined based on the principle of operation and action of the suction cup. A vacuum forms between the two surfaces.
He is responsible for holding the bracket with the device. If air gets inside this space, it is logical that the suction cup falls off and falls.
Glue the suction cup onto the glass
This especially often becomes a problem for drivers who complain about the insufficient strength of such windshield mounts for navigators, phone stands and other items in the car. It is important to remove dirt and grease from the surface on which you will be attaching the item. This can be done using glass cleaner that contains alcohol. In this case, you need to wash not only the surface, but also the Velcro itself. After this procedure, the secured item will not cause you any inconvenience.
Taking into account all the tips and recommendations, you can easily take advantage of convenient interior elements. The methods proposed above will leave you no reason to worry about the strength of the fixed items and the duration of their use.
Material updated 08/04/2017
Benefits of tile suction cups
Suction cups are incredibly popular among consumers. This is understandable because they are easy to mount on the wall and do not require drilling any holes in the tiles. Many products are already produced with Velcro.
The reliability of attaching Velcro to the wall depends on the quality of the materials from which they are made.
When purchasing, you should pay attention to the surface of the suction cup - its inner surface should be absolutely smooth. This factor is very important, as it decides whether the suction cup will be suitable for attachment. You should also choose only suction cups of the correct shape.
The advantage of silicone holders is that they are easy to mount on the wall
Advantages of suction cups:
- They are quickly attached to the surface, without the need to use auxiliary tools.
- They do not spoil the tiles with unsightly marks on its surface.
- They are distinguished by their mobility. They are easy to dismantle and move from place to place.
- The low cost allows you to purchase various types of suction cups.
With suction cups already attached, you can buy a soap dish, special hooks, shelves, shower holders, various accessories, toilet paper holders, etc. Silicone suction cups are durable, economical and have a wide range of options. When purchasing a suction cup, it is important to remember that not only the quality of the accessory is important, but also the type of finishing material.
Related article: Do-it-yourself floor mats: examples of self-production
Reliable installation process
There is a special way to firmly and securely attach the suction cup to the windshield:
- First you need to wash the element itself from dirt and dust and wipe the glass. Moreover, it is best to use alcohol wipes to remove dirt and grease.
- Next, the surface must be thoroughly dried.
- The bracket must be pressed tightly against the glass, pressing firmly on it.
- Next, you need to press the locking lever.
- If the method does not work, then you should warm up the suction cup. This will make it softer and allow it to grip the glass more tightly.
If installation takes place on a surface that is not entirely level, it is recommended to use additional installation platforms.
They can be made from thin glossy plastic, the diameter is slightly larger than a suction cup. It can be glued to the panel with double-sided tape. Then the suction cup itself is attached here.
You can glue it to the panel using double-sided tape. Then attach the suction cup to this area.
In fact, the windshield is by no means the only place where you can install a suction cup for a DVR.
The dashboard can also be an excellent place for installation. However, you need to take into account that in most brands and models of cars it is not smooth.
Then additional thin material is used. A small circle is cut out of it, and the suction cup itself is attached to it. This method will be reliable, high-quality and durable.
What to do if the suction cup for the DVR does not hold?
Have you ever gotten into your car in the morning and found car glass holders lying on the floor, seat or dashboard? Have there ever been situations when the suction cup for the DVR fell off right on the road, on the next bump? If yes, then we will tell you how to avoid such surprises.
Why doesn't the suction cup hold?
The most common reason is cold. In winter, the windshield freezes, the rubber suction cup loses its elasticity and falls off. In such cases, drivers usually warm up the car, place the suction cup under the airflow and attach it back. This method, despite its prevalence, rarely leads to long-term results.
But sometimes the suction cup doesn't hold up well in the heat. If in the summer the car is often left in direct sunlight, this leads to numerous sad consequences, one of which is deformation of the holder mounts.
And sometimes the suction cup holder cannot be installed from the very beginning; it simply does not stick to the glass. There are two main reasons: either the glass is dirty or there is a layer of dust on the suction cup, or you got a defective holder.
What should I do to make the suction cups stick?
Act according to the situation.
There are several working methods, tested by many drivers, to restore the elasticity of a frozen suction cup.
- Warm up the car. Wipe the windshield with alcohol and wipe dry. Warm the suction cup, clean it of dirt and apply it to the glass. To be on the safe side (and if you have the means at hand), before putting the holder back in place, treat the suction cup with clear plumber's sealant or silicone grease.
- Budget popular option. Boil the mount in a soda solution for about 20 minutes. To make a solution of suitable consistency, take a teaspoon of baking soda per glass of water.
- A completely budget and desperate option for the most extreme case. The suction cup can be attached to glass or a dashboard using double-sided tape. This option is suitable only if you have nothing on hand except tape, and you need to secure the holder.
Most often, the suction cup can be easily returned to its place by simply warming it up and degreasing the area on the glass.
But if the mount is deformed or continues to fall off despite all your efforts, don’t worry and just buy a new suction cup holder. An excellent choice would be the Partner car holder for tablets. Other reviews:
Comparative review of popular car holders
5 ways to make a phone holder for your car with your own hands
Phone holder: types and selection rules
How to choose a car charger?
How to choose the right DVR mount?
How to properly glue a suction cup onto tiles or glass
Activities to put things in order in the bathroom are one of the most labor-intensive. The difficult climatic conditions of this room are to blame. However, to prevent mold and mildew from appearing, they must be carried out. After establishing cleanliness and order, it is worth beautifully hanging the necessary fixtures and decorative accessories.
In this article we will tell you how to glue a suction cup to various surfaces: tiles, glass, in order to hang a soap dish, hook, stand, or other household devices necessary in this way.
