Installing a mesh in a grant bumper

How to remove the radiator grille of a Lada Granta

In any car, the radiator grille is one of those elements that catches your eye when you first look at the car. It is located on the front of the car and is therefore so noticeable. The “facial expression” of a car also very much depends on how the radiator grill looks.

It is for this reason that many car owners change it or perform tuning to give their car some individuality. The Lada Granta radiator grill is no exception. You can see many attempts to improve it in various ways.

Many owners complain that this model has virtually no protection for the radiator from dust and dirt entering from the outside. Proper tuning helps eliminate this problem.

How to remove the radiator grille of a Lada Granta

Before tuning this element, let's figure out how it can be removed from the car.

The Lada Granta radiator grill can be removed in 2 ways. According to the classical method, you need to proceed as follows:

remove the front bumper;
on its inner side, unscrew the nuts securing the grille, there are 9 of them;
Click to open 2 locks under the headlights.

Removing the radiator grille along with the bumper on the Lada Granta

The second method makes it possible to do without dismantling the front bumper. The algorithm looks like this:

Unscrew 6 bolts from the top of the grille;
bend it, stick your hand in, find by touch 4 bolts at the top and 5 nuts at the bottom - for this you will need a figure eight wrench;
Under the headlights, use a screwdriver to open the 2 clamps.

After dismantling, you can begin tuning. After this, installation is performed in reverse order.

Tuning using a utility net

Tuning the front part of a Lada Granta car using a Chain-link mesh is very common. Such a mesh can be bought at any hardware store - it can be metal or plastic.

We choose the option with medium-sized cells. This is important to avoid excess dust getting under the hood of the car.

Fine mesh netting for making radiator grilles

Next you need to follow a simple algorithm:

using one of the methods described above to remove the radiator grille;
cut off all horizontal and vertical jumpers, leaving only the outer frame;
using cold welding, seal all the holes that were created after the jumpers were cut off;
clean the surface from all irregularities and burrs;
Cut the mesh to size and attach it to the frame. If the mesh is plastic, you can simply glue it. If it is made of metal, heat the frame so that it does not burst, and screw the mesh with self-tapping screws;
paint and wait for it to dry. At this point the tuning can be considered complete.

Tuning the radiator grill using mesh on the Lada Granta

Installing a radiator grille on a Lada Granta car

After tuning is completed, the Lada Granta radiator grill is installed back. To do this, the finished part is placed in the standard opening in front of the radiator and secured with nuts, bolts and clamps. Next, you need to check how correctly the fit is made and inspect the front part of the machine for irregularities, burrs and protrusions. If any are found, clean them with a file or fine sandpaper.

Conclusion

Tuning the radiator grille is a good way to make the appearance of a car more attractive, make it stand out from the crowd, and add originality. This can significantly change the visual perception of your car when looking at it from the front.

The car will acquire a more modern, stylish and attractive exterior. It is precisely these considerations that drive those car owners who decide on tuning.

In the case of the Lada Granta car, the argument in favor of alterations of this type is the actual lack of protection of the engine compartment from particles of dirt, dust and moisture entering from the front. This is unlikely to benefit the car. Therefore, many car enthusiasts resort to making radiator protection with their own hands.

Radiator grille for Granta

The Lada Granta is attractive in every way, because in addition to its economical price and great demand, it looks more than decent in appearance. The designers did a good job not only on the body, but also on its additional elements, in particular I would like to highlight the modern Grant radiator grille.

However, it doesn’t stop there, because tuning fans are increasingly resorting to modernizing the interior of the car and its exterior to their own taste. Moreover, the potential for creativity is inexhaustible.

Based on the reviews of the owners, we can conclude that the Lada Granta contains defects that can be redone and corrected.

Lada Granta, relevance of tuning

Styling or the more popular word tuning can be heard more and more often from the mouths of car enthusiasts. This is the name given to the process or result of modernizing the appearance of a car.

It is possible to change your car almost beyond recognition. In addition, now this can be done much easier than before, because there are more and more tuning centers and specialized online stores. There are even ready-made body kits available that allow you to change the car body to suit a certain style. Lada Granta was no exception.

However, for sure, installing a ready-made body kit purchased in a store is not as interesting as doing it yourself. After all, tuning is a creative process.

Many will agree that the most spectacular external components of the body, by which it becomes clear what kind of car is in front of us, are headlights, wheels, all kinds of optics and a radiator grille.

In the Lada Granta, at first glance, the grille is not such a significant body detail, but it provides many opportunities for tuning. In addition, in the Lada Granta, tuning the radiator grille can be done without much difficulty. In addition, this spare part can be made manually.

It is not necessary to have special skills for this. To perform this operation we will need standard tools and consumables.

Installation of chain-link mesh on the radiator grille

If you want to give your Lada Granta a brutal look, you don’t have to look for a special body kit at a tuning studio. Correct this situation yourself. Let's start with the radiator grille on the Grant.

Source: https://chevroletcars.ru/info/kak-snjat-reshetku-radiatora-lada-granta/

How to remove the radiator grille of a Lada Granta

Before tuning this element, let's figure out how it can be removed from the car.

The Lada Granta radiator grill can be removed in 2 ways. According to the classical method, you need to proceed as follows:

remove the front bumper;
on its inner side, unscrew the nuts securing the grille, there are 9 of them;
Click to open 2 locks under the headlights.

Removing the radiator grille along with the bumper on the Lada Granta
The second method makes it possible to do without dismantling the front bumper. The algorithm looks like this:

Unscrew 6 bolts from the top of the grille;
bend it, stick your hand in, find by touch 4 bolts at the top and 5 nuts at the bottom - for this you will need a figure eight wrench;
Under the headlights, use a screwdriver to open the 2 clamps.

After dismantling, you can begin tuning. After this, installation is performed in reverse order.

➤ Protective mesh for the Lada Granta Liftback radiator

The standard modification does not provide for the presence of a protective mesh for the Lada Granta Liftback radiator on the front bumper. As the need arises, the owner can install the accessory himself, having first purchased it in the store.

The mesh is used to protect the radiator from mechanical damage from gravel and stones during movement. And also from clogging the honeycombs with fluff, leaves, and debris, which increases the operating temperature and reduces the efficiency of the cooling system. To install the radiator mesh on the Lada Grant Liftback yourself, you do not need special equipment or tools. It is enough to devote 10 minutes of free time.

Modifications of protective nets on Lada Granta Liftback

metal mesh with a perimeter frame made of polymer;
all-metal mesh;
all-metal with chrome inserts along the outer perimeter.

Reviews

№	Positive
1.	Vasily: I bought a metal grille for the radiator at a car dealership and installed it myself. The procedure is not complicated, every car owner can do it. I wanted to take one with chrome plating, but since I live on the periphery, it makes no sense.
2.	Victor: It’s a pity that the model is not equipped with a mesh as standard. I had to contact the service center for installation, since there was no free time due to my busy schedule. I've been using it for two months now, no complaints.
3.	Konstantin: My comrades recommended that I “protect” the radiator. In the store, the seller provided three modifications of the accessory from different manufacturers. I didn’t buy one with chrome plating, since I often drive on gravel roads; I settled on metal with a plastic edging.
4.	Sergey: I want to leave my positive review about the original protection of the Lada Granta radiator grille. Catalog number: 99999219004100 in a metal frame. Many thanks to the manager for his practical advice.
5.	Vyacheslav: I bought the car six months ago from a dealership, everything was fine, but the net was missing. I ordered installation from the auto service center at the store, and the technicians completed the installation within 10 minutes. Satisfied, my recommendations to car enthusiasts.
6.	Alexander: I’ve heard negative reviews about metal protection, I can’t confirm it. I installed it myself two months ago, still no knock. Perhaps the reason was a violation of installation technology or the purchase of non-original products.
7.	Vitaly: Let's hope that subsequent modifications of the Lada Granta Liftback will already be equipped with metal protection. In the meantime, I installed it myself, I didn’t find anything complicated in the process. My recommendations to car owners.
8.	Egor: I ordered an accessory from China, the quality was pleasantly surprising, I expected the worst. The entire installation process took no more than 15 minutes. So far there are no complaints, the mesh is fixed tightly, there is no play or creaking.
Negative
1.	Victor: I can’t speak positively about the quality of the protection. Already after the first thousand mileage, play and knocking on uneven roads appeared. To eliminate this, I bent the nylon ties. How long will it last?
2.	Vasily: I bought original accessories, but it’s not clear why the protection is loose. I can’t speak positively. I'll try to visit a service station for re-installation.

Conclusion Protection of the radiator grille is extremely important, especially for the Lada Granta Liftback. Considering the design of the standard bumper, where there are 3 large openings, flying gravel and stone can damage the paintwork and the honeycomb of the radiator of the cooling system. Another question is the number of such nets installed. Not everyone agrees with fixing three at the same time. For some, one is enough, in the lowest contour of the bumper. However, this opinion is erroneous, since gravel bounces to a greater extent in the middle part than in the lower perimeter.

How to remove the radiator grille of a Lada Granta without removing the bumper

» Miscellaneous » How to remove the radiator grille of a Lada Granta without removing the bumper

Many owners complain that this model has virtually no protection for the radiator from dust and dirt entering from the outside. Proper tuning helps eliminate this problem.

Tuning the radiator grille of Lada Granta

Replacing the radiator grille. — Lada Granta, 2012 on DRIVE2

I installed the grille as promised in the review and photo.

I had an analog grille, so installation took 15 minutes. Unscrew the 4 bolts at the top and the two nuts on the sides.

I installed the new grille in the same way. At the bottom of the grille there are 5 studs, the nuts on them are 5. I also took a photo of the studs. There is no need to solder them, since they are already in place and are not poorly made. The holes for the bolts are also drilled at the top.

I don’t know who had what didn’t fit, but for me everything fit perfectly. The pins fit exactly into the holes - I was pleased)))

Let me note that I physically cannot tighten all 5 lower nuts without removing the bumper. The hand doesn’t fit)) Only 2 on the sides, but in my opinion this is quite enough.

I also wanted to tell the guys who will remove the original grille without removing the bumper - this is a real hassle) Removing the bumper for the first time when installing the fog lights took 30 minutes. Don't be lazy, take pictures. It's actually easier to remove the grille; there are a lot of bolts.

The grille is painted well. Everything seems to be there)) Photo after washing)))

In the photo, the bottom of the grille is not screwed on, I dropped the nuts and didn’t look for it, but screwed it on later.

Issue price: 1,600 ₽

www.drive2.ru

Removing, installing, replacing the radiator grille trim of Lada Granta VAZ 2190

download photo to mobile phone

Operation, maintenance and repair manual for Lada Granta VAZ 2190

Section 11:

Car body Lada Granta VAZ 2190

To remove, install and replace the radiator grille trim on a Lada Granta VAZ 2190, you will need: a Phillips-blade screwdriver, 8-size wrenches, TORX T20, 10-socket socket. 1. Open the hood and place it on the stop. 2. Remove the front bumper (see “Removing and installing the front bumper”).

3. On the inside of the bumper, unscrew the nine nuts A (Fig. 11.1) securing the radiator grille trim. 4. Press out two clamps B (one on each side) of the side bumper fasteners... 5. ...and disconnect the radiator grille trim from the bumper.

6. If necessary, unscrew the three nuts securing the decorative trim of the radiator grille trim... 7. ...push out the clamps... 8. ...and remove the decorative trim of the radiator grille. 9. Replace the radiator grille. Install the radiator grille trim on the Lada Granta VAZ 2190 car in the reverse order of removal.

How to Remove the Radiator Grille on a Granta Video

Modification of radiator grilles on the Lada Grant

Beautiful body, which AvtoVAZ designers worked on, modern grille

radiator - Granta is good for everyone.

But there is no limit to perfection, because even though the car came off the assembly line relatively recently, tuning enthusiasts are already changing the appearance and internal components of the car to their own taste. Moreover, the scope for creativity is enormous.

Based on the reviews of the owners, one can realize that the defects of the Lada Granta are in the car from the factory, and almost everything can be processed and improved.

Tuning Lada Granta

External tuning or styling is distinguished. This is nothing more than changing the appearance of the car. So, you can change your own car almost beyond recognition. Moreover, at the moment everything for this is available and it can all be easily purchased in online stores or tuning centers.

At the moment, they even produce entire sets of body kits that allow you to change the car body in certain styles. How to remove the heater motor on a UAZ Bukhanka video products for home, work and leisure. I installed it on a Camry 2004 2 how to remove the heater motor on a UAZ loaf.

Such body kits are also offered for the Lada Granta.

But, for sure, it’s not interesting to simply install a body kit purchased in a store. Some people love to do everything with their own hands. The mongoose alarm circuit is not like a mongoose. Video about installing an alarm on a VAZ. After all, tuning is a creative process.

Everyone will be able to agree that the more impressive elements of the body, from which it immediately becomes clear what kind of car is in front of us and what its character is, are wheels, headlights and other optics, as well as the radiator grille
. All materials in the section “radiator grille on and remove the front radiator grille - how.

Such a seemingly insignificant body detail, like a grille , provides very wide opportunities for tuning. In addition, you can replace the grille with a tuned one without much difficulty. You can also make this part yourself. You don't need any special skills for this.

All the tools for this operation are quite standard, and the materials are consumables.

Simple mesh Chainlink and brutal Granta

In order for your Lada Granta

looked a little more brutal, no need to look for a special body kit from a tuning studio. You can try to change this situation yourself. Let's start with Grant's radiator grille.

Using chain-link mesh for tuning the grille

One of the most common materials used to create a new part to replace a factory one is Rabitz mesh.

with a small cell. Such a mesh can be made of any materials, even plastic or steel.

You can easily purchase it in many stores, and the cost will be very low. You don't know how to replace the timing belt on a daewoo nexia? Visit our website, where you will find step-by-step instructions, as well as a video on replacing the fuel belt and rollers.

In addition, a self-made radiator grille

on Granta - it's always interesting.

Radiator grille for Lada Granta

help channel: Rearview mirror: .

Removing the standard front bumper of LADA Granta

A specialist from the tuning center Drivebox.ru removes the factory front bumper from Granta for installation.

An instrument will be needed for the operation. This includes a hacksaw, a file and a needle file, sanding or sandpaper, fasteners, and cold welding.

Before the radiator grille

To suit your personal taste, you need
to remove
the factory grille. It is very simple and can be done completely independently.

how to remove the ignition switch on a daewoo nexia instructions for removing the ignition switch on a daewoo nexia (Daewoo Nexia) auto, auto, car, cars, review. For everything to go well, you need to be careful and follow a certain order of operations.

To dismantle you will need an “8” key, a Phillips screwdriver, a “10” socket and a T20 TORX key.

Now you can proceed directly to dismantling. To do this, you need to lift and fix the Granta hood, then you need to dismantle the bumper. Inside the bumper you can see 9 nuts. They need to be unscrewed. Then you need to pull the fasteners from the sides of the grille. Next, grille is simply removed. If necessary, you can also unscrew 3 nuts.

All actions must be carried out as carefully as possible, otherwise there is a risk of breaking the grille and then you will definitely have to go to the store for a new one. Plus the factory grille

The radiator will work in our self-made one as a frame.

After removal, you need to cut off the horizontal or vertical jumpers as carefully as possible with a hacksaw or file. Replacing the clutch disc on a VAZ 2106, the shaft on a VAZ 2101 video how to replace the clutch on. Grant radiator grille: how to remove and methods. Don't be alarmed if the frame is no longer as rigid as before. This is a common effect of such tuning.

Examples of how the front grille

All burrs must be carefully sanded with a needle file. How to remove the lock in nature, I swam in the lake and drowned the keys, I opened the car with wires, it starts, but there is a lock, I don’t have any tools with me, how can I remove the lock?

In order to hide the holes that appeared as a result of cutting off the stiffeners and jumpers, you can use cold welding. It dries very quickly once applied. Now you can continue the process again.

You need to thoroughly sand the resulting frame with fine-grained sandpaper.

The next step is to prepare the grid. This is done according to our frame. You can secure the mesh with self-tapping screws or clamps, if possible. It is recommended to heat the self-tapping screws so that the material of our frame does not crack. If the Chainlink mesh is made of plastic, then it can easily be glued to the frame.

Next we need to carry out decorative processing of our lattice. To do this, you can use paint or self-adhesive film. As for colors, for Grant, tuning gives you the opportunity to fully realize your creative abilities. How to remove the left headlight on a Kia Ceed, 2013? (Solved) -. If you decide to do tuning, the grille

can be painted according to your choice.

Radiator protection installation

For some unknown reasons, radiator was not protected from external influences. During car use, the radiator

may become clogged, which can lead to overheating of the motor. Installing protection is the very first and necessary tuning for Grants.

A new radiator grille or modification to the original one is a good way to protect the radiator . The protective net can be purchased at the market or in automobile stores. That's what it's called - a protective mesh for the bumper. The procedure is almost the same as when making a decorative lattice from chain-link.

You can install such protection not on the grille, but directly on the radiator

When is it necessary to replace the timing belt and how to do it on a VAZ 21099? Visit our website, you will find answers to these questions with detailed instructions and videos. To do this you need to make a special frame.

radiator protection is very easy to install. At the bottom, the protection is attached to the ears of the Lada Granta radiator, and at the top - with bolts.

One of the advantages of such protection is that you do not need to remove the bumper to clean the radiator or replace the mesh.

If you do not take care of these issues in time, then, in addition to engine overheating, you may also need to replace the heater radiator, which tends to clog. So, simple tuning for Grant is a way not only to make his car brighter, but also to protect it from ridiculous breakdowns.

Source: https://top-geer.ru/kak-snjat-reshetku-radiatora-na-grante-video/

Granta radiator grille

Lada GRANTA was released as a budget car in 2011. The queue for it was huge, and this is understandable. For the people of our country, such a car is an excellent alternative to expensive foreign cars. But some shortcomings were made during development. One of them is the unprotected Granta radiator grille. For some reason, it does not have a mesh to protect it from dust, midges and flying pebbles when moving. Car enthusiasts have always found a way out of such situations. There are already several ways to improve both the protective properties and appearance of vehicles.

Tuning using a utility net

Tuning the front part of a Lada Granta car using a Chain-link mesh is very common. Such a mesh can be bought at any hardware store - it can be metal or plastic.

We choose the option with medium-sized cells. This is important to avoid excess dust getting under the hood of the car.

Fine mesh netting for making radiator grilles

Next you need to follow a simple algorithm:

using one of the methods described above to remove the radiator grille;
cut off all horizontal and vertical jumpers, leaving only the outer frame;
using cold welding, seal all the holes that were created after the jumpers were cut off;
clean the surface from all irregularities and burrs;
Cut the mesh to size and attach it to the frame. If the mesh is plastic, you can simply glue it. If it is made of metal, heat the frame so that it does not burst, and screw the mesh with self-tapping screws;
paint and wait for it to dry. At this point the tuning can be considered complete.

How to remove the radiator grille of a Lada Granta without removing the bumper?

» Other »

Question for experts: Is it possible to remove the radiator grill of a Lada Granta without removing the bumper??

Best regards, Serega220™

-answer

This video will help you figure it out

Answers from experts

First unscrew the bumper, then unscrew the grille

Gorbunov Alexander Sergeevich:

As promised, I am writing based on the results of how to remove the grilles (there are two halves on top) of the Pajero Sport radiator from the 12th year. I am writing in great detail, both for blondes and for people like me (apparently “without hands”, which are advised to remove here..) The purpose of removing the grilles was to screw decorative and at the same time protective linings from stainless steel tubes onto them. So :Open the hood lock - the lever is in the cabin, to the left of the steering wheel below you need to pull.

Lifting the hood itself, I felt under it in the middle for a latch, which I pressed and then completely opened the hood and secured it in the open state with a special spacer, which “is snapped in from below. In the middle I saw two halves of the radiator grille, connected at the top by an elastic seal. Each half is attached to the body with two “ "pistons" made of plastic, into which screws are screwed in for a Phillips screwdriver. You need to very carefully select a screwdriver for them or, as I did, a screwdriver attachment.

Of the four cross attachments, different in size, only this one fit, somewhere in the middle. I especially draw attention to this because these screws are made of aluminum, simply painted black, and unscrewing them with an unsuitable screwdriver will cause them to deteriorate! When you manage to unscrew and pull out this screw, you need to remove the piston from which it was unscrewed by prying it either with your nails, or with a nail file. You can cut it with a knife, but it can also... ruin it.

Having taken out the screw and piston, looking carefully, we see empty holes on the body very close to each other, into which it is very convenient to temporarily insert them so as not to drop or lose them. I was shooting the grille in the snow and it was very relevant. But even on the asphalt it’s not fun to crawl and look. We remove all 4 screws with caps according to this scheme. Now the top of both halves of the grate will move freely. But as I already wrote, they are connected by an elastic band glued on top.

At first it seemed to me that these halves were also screwed on from the bottom from the inside. They can be seen by shining a flashlight and “theoretically you can reach them with a very long screwdriver. But I didn’t have one, and while I was trying to find it, I read on the Internet that it was not so. But the grilles are actually fastened with latches and these screws have nothing to do with it. Therefore, the next step is to grab one half of the grille with both hands closer to each edge and pull it towards you.

On the second attempt, the latch, first one, and then the second, clicked and one half separated from the machine and I hold it in my hands, and the elastic band “connects it with the second “not yet removed” half. At this stage, so as not to inadvertently tear it off It’s better to ask for the help of an elastic band, even if it’s a child or mother-in-law, who has someone on hand, to hold the first half while you disconnect the second half in the same way..

So I managed it myself and I hope I explained it to you.

pipe insulation s new-granta /delaem-pravilnoe-zimnee-uteplenie-na-lada-granta/

A working car does not need this tripper. I had a Lada like this when I was 30, without any cortons in my shirt, I drove in it

If it heats up before the working one and does not reset while driving, then there is no need to close it, otherwise, immediately after the radiator, at least hang a cardboard

What's the point? So that the radiator doesn't freeze? So for this you need to fill in a non-freezing liquid, “antifreeze” is called. Or to make it warmer in the cabin? This is unlikely to happen. In the engine cooling system there is such a tricky piece of hardware called a “thermostat”. It is designed to maintain a stable engine temperature.

When starting, even in summer, the coolant is driven by the pump in a small circle, without going to the radiator. And only when the temperature reaches 80° the thermostat opens the pipe valve to the radiator. That is, no matter what you cover, if the interior heating stove is powered by the engine, then the temperature in it will be the same as the engine, i.e.

e 80° stable.

If you really get too confused, they sell plastic radiator grilles (solid)

I drove Zhiguli and Moskvich cars in the far north for 20 years and did not install any cardboard or flaps, even in the 70-80s. And modern cars don’t even need this if the engine is working properly.

Granta seems to be a modern car. Why does she need cardboard? If it does not heat up to operating temperature, most likely the thermostat is closed. I covered the inside of my Volga with cardboard in front of the radiator so that Carlson wouldn’t blow. It began to warm up faster. But, this is the Volga! Moreover, she is 18 years old. So she's forgiven)

if there is not enough heat, then you just need to change the thermostat insert to a higher temperature one

Sew a curtain and tie it with strings from the outside to the radiator grille.

s otvet.mail /question/203902741

Source: https://dom-voprosov.ru/prochee/kak-snyat-reshetku-radiatora-lada-granta-bez-snyatiya-bampera

How to remove the radiator grille of a Lada Granta (two methods) - RepontoMore

Anyone who has at least once seen the latest car model from the VAZ concern will say that a new radiator grille for the Grant is an extremely necessary thing.

Don’t worry, the item fully complies with all standards and has a modern appearance.

However, unlike the grilles on previous Lada models, it tends to let in a large amount of dust, which severely clogs the radiator and engine of the car.

1 Improvement of Lada Granta

When purchasing the newest model from the Volzhsky Automobile Plant, you can expect that you are getting a reliable, modern car at an appropriate price.

The car is equipped with reliable parts, an original body and a full list of instruments necessary for comfortable everyday driving.

Despite this, craftsmen do tuning, most often replacing optics, wheel rims and completely painting the car.

Tuning a Lada Granta car We recommend reading:

The radiator grille is also often replaced. It is by this detail that many judge the character of the car and the capabilities of its owner.

Another reason for the huge demand for new grilles is the ease of DIY installation. To do this, you do not need to have certain skills or buy expensive equipment.

All you need is straight hands and standard tools that are found in every garage.

2 Making a grid from household mesh

Many new owners of Grants, who are just planning to tune the radiator grille, begin to visit specialized salons in the hope of finding an original part.

It is worth saying that this method works great, but only if the buyer has an amount of 5–6 thousand rubles or more.

And if you add the payment for installing the grille, then the owner of the new Lada model will have to “take it out and put it in” more than 8 thousand rubles.

To save money, you can create the element yourself. The main material for the manufacture of the radiator grille on the Lada will be a regular chain-link mesh with small cells. You can purchase this product at any hardware store in the country. On the shelves there are both plastic and steel products. In addition to the material for manufacturing, we will also need:

file;
needle file;
hacksaw for working with metal;
sandpaper or sanding paper;
cold welding tool;
fasteners.

Source: https://remontomore.com/ustanovka/kak-snyat-reshetku-radiatora-lada-granta-dva-sposoba.html

Radiator grille on Granta - the last steps towards the ideal

Anyone who has at least once seen the latest car model from the VAZ concern will say that a new radiator grille for the Grant is an extremely necessary thing.

Don’t worry, the item fully complies with all standards and has a modern appearance.

However, unlike the grilles on previous Lada models, it tends to let in a large amount of dust, which severely clogs the radiator and engine of the car.

1 Improvement of Lada Granta

When purchasing the newest model from the Volzhsky Automobile Plant, you can expect that you are getting a reliable, modern car at an appropriate price.

The car is equipped with reliable parts, an original body and a full list of instruments necessary for comfortable everyday driving.

Despite this, craftsmen do tuning, most often replacing optics, wheel rims and completely painting the car.

Tuning a Lada Granta car We recommend reading:

The radiator grille is also often replaced. It is by this detail that many judge the character of the car and the capabilities of its owner.

Another reason for the huge demand for new grilles is the ease of DIY installation. To do this, you do not need to have certain skills or buy expensive equipment.

All you need is straight hands and standard tools that are found in every garage.

2 Making a grid from household mesh

Many new owners of Grants, who are just planning to tune the radiator grille, begin to visit specialized salons in the hope of finding an original part.

It is worth saying that this method works great, but only if the buyer has an amount of 5–6 thousand rubles or more.

And if you add the payment for installing the grille, then the owner of the new Lada model will have to “take it out and put it in” more than 8 thousand rubles.

file;
needle file;
hacksaw for working with metal;
sandpaper or sanding paper;
cold welding tool;
fasteners.

How to remove Grant's radiator grille and tuning methods

When purchasing the newest model from the Volzhsky Automobile Plant, you can expect that you are getting a reliable, modern car at an appropriate price. The car is equipped with reliable parts, an original body and a full list of instruments necessary for comfortable everyday driving. Despite this, craftsmen do tuning, most often replacing optics, wheel rims and completely painting the car.

Tuning the Lada Granta car

The radiator grille is also often replaced. It is by this detail that many judge the character of the car and the capabilities of its owner. Another reason for the huge demand for new grilles is the ease of DIY installation. To do this, you do not need to have certain skills or buy expensive equipment. All you need is straight hands and standard tools that are found in every garage.

Lada Granta, relevance of tuning

Styling or the more popular word tuning can be heard more and more often from the mouths of car enthusiasts. This is the name given to the process or result of modernizing the appearance of a car.

However, for sure, installing a ready-made body kit purchased in a store is not as interesting as doing it yourself. After all, tuning is a creative process.

It is not necessary to have special skills for this. To perform this operation we will need standard tools and consumables.