How to tighten the alternator belt on a Hyundai Accent

Procedure for replacing Hyundai Accent engine belts

Replacing engine belts on a Hyundai Accent is carried out in accordance with the regulations established by the manufacturer.
Belts can be changed individually or as a set. Difficulties, as a rule, are caused by a small amount of space under the hood, where, during a complex replacement, it is necessary to install three drive belts.

Let's look at the procedure for replacing Hyundai Accent engine belts and look at each procedure step by step.

Location of belts on Hyundai Accent

1 – crankshaft pulley, 2 – tension roller, 3 – air conditioning compressor pulley, 4 – air conditioning compressor drive belt, 5 – alternator belt, 6 – power steering belt, 7 – power steering pump pulley, 8 – coolant pump pulley, 9 – generator pulley.

Compressor belt

All engine belts are located under the hood. The air conditioning compressor belt runs from the crankshaft pulley to the compressor pulley. Its tension occurs due to the action of the tension roller (indicated in the photo).

Generator belt

The alternator serpentine belt grips the alternator pulley, crankshaft and water pump. This part is tensioned using a special tension mechanism that moves the generator.

Power steering belt

This V-belt grips the pump pulley and the power steering pump shaft; its tension occurs due to the movement of the power steering pump housing, which is mounted on a bracket and attached to the power unit.

Catalog numbers of Accent engine belts:

• Air conditioner belt - article number 97713-1E000.
• Alternator belt - article number 25212-26021.
• Power steering belt - article number 57231-29100.
• Timing belt - article number 24312-26050.

When is it necessary to replace?

Engine belts are quite durable and rarely need to be replaced.

There are no clearly defined deadlines establishing the procedure for replacing belts on a Hyundai Accent - they change in the event of excessive stretching of the belt, cracks appearing on it, delamination and loosening of the surface.

It is believed that it is necessary to systematically diagnose the condition of belts after a mileage of 60 thousand km. Since replacing belts is quite simple, you can purchase replacement kits in advance and always carry them with you.

Poly V-belts for the Hyundai Accent engine have a long service life and are rarely changed. More often than not, the power steering belt is the first to fail. If the power steering belt is faulty, an unpleasant chattering noise may appear under the hood.

note

In such a situation, adjustment often helps, but if the belt is too stretched, it should be replaced.

When replacing the power steering belt, you will also have to remove the alternator belt (which, in case of severe wear, can also be replaced).

Procedure for replacing Hyundai Accent engine belts

• The jack is installed under the right front wheel.
• Next, the engine crankcase protection is removed.
• Unscrew the bolts securing the water pump pulley (4 pcs.).
• Loosen the generator tension with the head by 12.

• Remove the alternator belt and install a new one in its place.
• Loosen and unscrew the bolts securing the power steering pump (the head must be inserted into the hole in the pump pulley to remove it).

• Replace the power steering belt.
• To replace the compressor belt, you must remove the wheel and wheel arch liner.
• Using the tension roller, release the tension, remove and replace the belt.

On a Hyundai Accent, the procedure for replacing engine belts can be determined from the manual. The job of replacing all belts usually takes 6 to 8 hours. There are no strict timing for replacing belts; usually such work is carried out after 60 thousand kilometers or when extraneous noise, whistling, or “rustling” appears in the systems.

Also, a visual inspection will help determine the condition of the belts - there should be no cracks, stretch marks, or delaminations on the parts. If such defects are detected, the belt should be replaced.

Source: https://modtop.ru/poryadok-zameny-remney-dvigatelya-khenday-aktsent

Location of belts on Hyundai Accent

1 — crankshaft pulley, 2 — tension roller, 3 — air conditioning compressor pulley, 4 — air conditioning compressor drive belt, 5 — alternator belt, 6 — power steering belt, 7 — power steering pump pulley, 8 — coolant pump pulley, 9 — generator pulley.

Compressor belt

All engine belts are located under the hood. The air conditioning compressor belt runs from the crankshaft pulley to the compressor pulley. Its tension occurs due to the action of the tension roller (indicated in the photo).

Generator belt

The alternator serpentine belt grips the alternator pulley, crankshaft and water pump. This part is tensioned using a special tension mechanism that moves the generator.

Replacing drive belts on a Hyundai Accent

Replacing belts on a Hyundai Accent usually causes difficulties due to difficulty of access. After all, there is not much space for replacing belts under the hood of the Hyundai Accent, and there are three drive belts.

Air conditioning compressor poly-V belt (original number 97713-1E000), generator poly-V belt (25212-26021) and power steering V-belt (57231-29100). To understand how it all works, below we offer a diagram of the Accent drive belts.

The air conditioning compressor belt runs from the crankshaft pulley to the air conditioning compressor pulley. The belt tension is provided by a special tension roller. The alternator belt rotates through the crankshaft, alternator and water pump pulleys. The tension of this belt is carried out by a tensioning mechanism that moves the generator.

The power steering belt is thrown over the pump pulley and the power steering pump pulley; this belt is tensioned by moving the power steering pump housing on a special bracket that is attached to the engine. We look at the diagram of Hyundai Accent drive belts in the photo.

To replace or adjust the tension of the air conditioning belt in a Hyundai Accent, you need to remove the wheel and fender liner. Because there is no other access to this area. The tension roller, which regulates the tension, will allow you to loosen or tighten this belt. For clarity, we offer a photo. The arrow indicates the tension roller.

To remove the Accent generator belt, you need to loosen the generator tension mechanism. To do this you will need a 12mm head. The same mechanism is used to tension the belt.

But if poly-V belts for driving auxiliary units are quite durable, then the power steering belt is the first to fail. For the most part, it is he who chirps under your hood.

Although the unpleasant sound can be eliminated by adjustment (by moving the power steering along the bracket from the engine), sometimes the belt is so stretched that there is simply nowhere to adjust it. Then only replacement will help.

But to replace the belt we have to remove the alternator belt, without this there is no way.

Let's say the alternator belt has already been removed. Now we need to loosen the bolt securing the power steering pump to the bracket and unscrew another one on the other side. In the next photo, the locations of the required bolts are marked with arrows.

If you can get to one bolt with almost any wrench, then the second can be unscrewed only with the head, pushing it through the hole in the power steering pump pulley.

In principle, no special devices or special tools are required when replacing Hyundai Accent belts. about replacing the Hyundai Accent timing belt here. You can read it, it will definitely come in handy.

Source: https://ruauto99.ru/2017/05/zamena-privodnyx-remnej-na-hyundai-accent/

Search for spare parts

Home > Hyundai parts > Hyundai Accent parts > Air conditioner belt roller

Replacing the Timing Belt on a Hyundai Accent — logbook Hyundai Accent Red Edition 68RUS 2008 on DRIVE2

It already fits on my Aktsa TO 40. Knowledgeable people say that it is better to replace the belt at 40-42 thousand km.

And I'm already starting to think about replacing the timing belt.

How to replace a timing belt

Replacing the timing belt is carried out on an overpass, lift or inspection pit and is always accompanied by removing the generator, air conditioning and power steering belts. Under normal conditions, they need to be changed as needed, but when changing the timing belt, they will have to be removed in any case.

Replacing the timing belt Hyundai Accent

The timing belt is one of the main elements of the gas distribution mechanism in internal combustion engines. It serves to coordinate the operation of the fuel injection and exhaust gas systems with the rotation of the crankshaft. Working under difficult conditions, the timing belt needs constant monitoring and periodic replacement.

Replacing the timing belt on a Hyundai Accent

According to the manufacturer's recommendation, every 50,000 km the timing belt should be replaced with a new one, and not only the belt, but also the tension rollers must be replaced. It is worth noting that only timely replacement of the timing belt can prevent serious engine damage, which can be caused by a broken belt.

After the belt breaks, the rotation of the crank and camshafts becomes desynchronized, causing the pistons to hit the valves with enormous force, destroying the parts of the gas distribution and crank mechanism. In this case, the owner cannot avoid complex and very expensive engine repairs.

Of course, it is much more profitable to replace the Hyundai Accent timing belt on time.

Timing belt tension Hyundai Accent

One of the most important conditions for the durability and trouble-free operation of the timing belt is its correct tension. Too little or too much belt tension can cause failure of the tension rollers, pump, reduced belt life, and even premature belt breakage.

In addition, if the belt is replaced incorrectly, the ignition angles may be disrupted, which will lead to a decrease in engine power and increased fuel consumption.

That is why you should trust the replacement of the timing belt exclusively to specialists from services and service stations authorized by the manufacturer - in this case, the car owner will avoid unpleasant surprises in the form of disruption of the correct operation of the timing system.

Very important:

It is necessary to check the integrity of the belt and its tension as often as possible - at least every 15,000 km . This recommendation, by the way, applies not only to Hyundai Accent cars. A belt that has mechanical damage in the form of abrasions, delamination or cracks must be replaced, regardless of its service life.

In addition, a thorough diagnosis must be carried out - the fact is that such damage indicates potential pulley failure, poor or excessive tension, or exposure to chemicals or extreme temperatures.

Of course, in such a situation, it is worth determining the true cause of the belt damage, otherwise the new timing belt may last much less than the manufacturer guarantees.

The cost of replacing the timing belt on a Hyundai Accent

The total cost of replacing a timing belt on a Hyundai Accent depends on the type of timing belt (8, 12 or 16 valves) and engine size. In our technical center you can replace a belt on a 12-valve engine for 4,000 rubles , for a 16-valve engine 3500 rubles .

It is worth noting that it will take our specialists only 1.5 hours to replace the timing belt. Clients can spend this time in a comfortable waiting room, which we have equipped with wireless Internet, TV and a coffee machine with delicious coffee. By the way, for the convenience of our customers, we accept not only cash - you can also pay with MasterCard and Visa cards.

Source: https://accent-remont.ru/zamena_remnya_grm_hyundai_accent/

How to Tighten the Alternator Belt on a Hyundai Accent

belts and rollers

Belt tension spring Hyundai accent since 1995 (Hyundai Accent)

alternator belt (4PK897) sohc hyundai accent from 1995 to 1999 not original (hyundai accent)

Alternator belt Hyundai Accent 1.5-1.6 l (Hyundai Accent)

Hyundai Accent 1.5-1.6 l alternator belt (Hyundai Accent) is not original

Hyundai Accent 1.5-1.6 l alternator belt (Hyundai Accent) is not original

Hyundai Accent sons alternator belt (Hyundai Accent)

power steering (power steering) Hyundai Accent since 1999 (Hyundai Accent)

power steering (power steering) Hyundai accent since 1999 (Hyundai accent) not original

power steering (power steering) hyundai accent sons (hyundai accent)

timing belt hyundai accent 1.3-1.5 l sons 12 valves (hyundai accent)

Timing belt Hyundai Accent 1.3-1.5 liters 12 valves (Hyundai Accent) not original

Timing belt Hyundai Accent 1.3-1.5 liters 12 valves (Hyundai Accent) not original

timing belt Hyundai Accent 1.5-1.6 liters, 16-valve since 1999 (hyundai accent) (22 mm, 105 teeth)

timing belt Hyundai accent 1.5-1.6 liters, not 16-valve since 1999 (Hyundai accent) (22 mm, 105 teeth) not original

READ When to Change the Timing Belt on a VAZ 2114

timing belt Hyundai accent 1.5-1.6 liters, not 16-valve since 1999 (Hyundai accent) (22 mm, 105 teeth) not original

Timing belt Hyundai Accent Sons with 8 valves from 1995 to 1999 (Hyundai Accent) (22 mm 92 teeth)

Hyundai Accent Alternator Belt Hyundai Accent Tagaz

Removing the alternator belt whistle or both
tighten the alternator belt
on the

Tagaz
Accent Alternator Belt
.

Whistling belt generator or power steering? (Turns out it's the power steering belt)

belt when engine starts

Hyundai Matrix power steering, 16 valve engine.
(belt squeak
) How to tighten the steering rack on a Lada Kalina: photos and videos. How to change the alternator belt on a VAZ 2112? Visit our website to find an article that describes the replacement process. How to tighten it I changed the alternator belt In the stress club we advise you to tighten it after all. Early.

Timing belt Hyundai Accent Sons with 8 valves from 1995 to 1999 (Hyundai Accent) (22 mm 92 teeth) not original

strip air conditioner (4PK829) Hyundai accent 1.5 liter don (Hyundai accent)

READ How to Check the Armature on a Generator

Hyundai Accent Air conditioning belt 1.5 liter Don 16 valves (Hyundai Accent) not original

Hyundai accent air conditioner, accent, 1.6 liters (hyundai accent)

Hyundai Accent 1.6 l air conditioning belt (Hyundai Accent) not original

Hyundai Accent 1.6 liter air conditioning belt (Hyundai Accent) not original

Hyundai accent air conditioner, accent, 1.6 liters (hyundai accent)

Hyundai Accent 1.6 liter air conditioning belt (Hyundai Accent) not original

Hyundai Accent 1.6 liter air conditioning belt (Hyundai Accent) not original

Hyundai air conditioning belt from 1997 (Hyundai Accent)

Hyundai accent air conditioner since 1997 (Hyundai Accent) not original

belt tensioner pulley Hyundai from 1998 to 1999 (Hyundai Accent)

Hyundai Accent 1.5-1.6 liters on a 16-valve timing belt since 1999 (Hyundai Accent)

Hyundai Accent 1.5-1.6 liters on a 16-valve timing belt since 1999 (Hyundai Accent) not original

Hyundai Accent 1.5-1.6 liters on a 16-valve timing belt since 1999 (Hyundai Accent) not original

Hyundai air conditioning tensioner pulley from 1999 (Hyundai Accent) is not original

READ How to Remove a Renault Logan Generator With Air Conditioning

Hyundai air conditioning tensioner pulley from 1999 (Hyundai Accent) is not original

Timing belt support roller (parasitic) Hyundai accent 1.5-1.6 l, 16 valves since 1999 (Hyundai accent)

Timing belt support roller (parasitic) Hyundai accent 1.5-1.6 l, 16 valves since 1999 (Hyundai Accent) not original

Timing belt support roller (parasitic) Hyundai accent 1.5-1.6 l, 16 valves since 1999 (Hyundai Accent) not original

air conditioner belt pulley (without bracket) Hyundai Accent since 1999 (hyundai accent)

Granico. spare parts for Korean cars Address: d. How to remove the front bumper on a Hyundai Getz Front bumper How to remove. Do not forget. Removing the alternator belt whistle or How to tighten the alternator belt on the Accent Tagaz Hyundai Accent Tagaz Tagaz Hyundai Accent. How to tighten the handbrake on a Skoda Fabia How to tighten the handbrake without removing the brake. Moscow, Shokalskiy proezd, 12 Phone: 7 (495) 504-91-39

Engine Hyundai Accent 1.5 liter characteristics, timing device

The Hyundai Accent 1.5 liter engine of the G4EC model, which is mainly found on the Accent, has a rather interesting design and is very reliable. Gasoline aspirated with a power of 102 hp. with proper operation, it can easily travel 300-400 thousand kilometers. Moreover, the engine is very repairable.

Today we’ll talk about the motor in more detail.

In-line engines of the “ALFA” series have a huge number of modifications. These are four-cylinder, four-stroke, liquid-cooled gasoline engines with an in-line vertical cylinder arrangement and a 16-valve cylinder head.

The engine has hydraulic compensators and does not require valve clearance adjustment.

Engine Hyundai Accent 1.5 liters

The Hyundai Accent engine cylinder block is a single cast iron casting that forms the cylinders, cooling jacket and oil line channels. The blocks are made of special high-strength cast iron, the cylinders are bored directly into the body of the block.

The cylinder block has special bosses, flanges and holes for fastening parts, assemblies and assemblies, as well as channels for the main oil line. At the bottom of the cylinder block there are five crankshaft main bearing supports with removable caps that are bolted to the block.

2.2.4 Poly V-belt

Service and operation

Manuals ￫ Hyundai ￫ Accent (Hyundai Accent)

Removal

Examination

Check the following items and replace them if defective.

Installation

Checking and adjusting tension

Measuring tension with a special device

Source: https://automn.ru/hyundai-accent/hyundai-5662-0.html

Other spare parts for Hyundai Accent

› Electronic dashboard clock › Connector › Fuel injector O-ring › Door trim › Steering system tube › Screw m › Clamp › Center body pillar, right › Left windshield grille › Rear light support bar › Automatic transmission thrust ring › Headlight bulb socket › Fitting windshield washer hose › Crankcase valve › Air filter duct › Air conditioner fan motor › Engine valve spring › Rear window guide l › Inner bumper panel › Front console › Bolt m › Spacer ring › Gearbox assembly › Bolt › Fuel system check valve › Mechanic Window lifter measurement doors front left › Engine piston k t pcs to pcs › Differential thrust ring › Rear bumper bracket › Exhaust manifold cover

How to change the timing belt on a Hyundai Accent with your own hands

The timing belt is one of the very important components of a car engine. Since the belt works in difficult conditions, every car owner must monitor its condition. Today we decided to look at the procedure for replacing the timing belt on a Hyundai Accent.

In order to change the timing belt, you need to drive the car into a pit or use a lift. Note that along with the belt it is also necessary to change the timing rollers. Otherwise, the new belt may wear out very quickly.

The replacement must be carried out very carefully, carefully following the instructions. Pay enough attention to ensure that all marks match during the procedure. After removing the belt, do not rotate the camshafts and crankshaft.

How long does it take to change the timing belt?

It’s worth noting right away that each car manufacturer indicates a certain frequency for replacing the belt.

Do not forget that in Russia, cars in most cases are operated in more difficult conditions (climate and roads). Therefore, such procedures need to be performed a little more often.

Timing belt "Hyundai Accent"

To ensure a truly successful repair of your car, always use only original spare parts for replacement. KOREA63 is a large selection of parts for Korean cars. Here you can easily select a timing belt for a Hyundai Accent or other Korean brand (Daewoo, Kia), as well as for Chevrolet.

The timing belt is the connecting link between the camshaft and crankshaft. This is a simple but important part, so it must be changed in accordance with the manufacturer’s operating requirements. Please note that it is highly not recommended to risk your safety and buy low-quality analogues. How to operate a part longer than required by the instructions.

The first signs that replacement is needed:

• the exhaust is painted black,
• the power unit vibrates noticeably during operation,
• There were problems starting the engine.
• extraneous sounds are heard in the engine operation.

If at least one of the signs appears, come to us and buy an original timing belt for the Hyundai Accent. Please note that you will pay more for it at a service station, but will not receive the same quality guarantee.

The timing belt kit replacement period for Hyundai Accent is every 50 thousand kilometers.

The engine timing kit includes:

• Timing belt.
• Timing tension roller.
• Support roller.
• Drive belt tension roller (if necessary or at a mileage of 100 thousand km).
• Drive belt (if necessary or at a mileage of 100 thousand km).
• Pump (pump) of the cooling system (if necessary or on a mileage of 100 thousand km).