How to remove a headlight on a VAZ 2107


Replacing a headlight on a VAZ-2107

The domestically produced car of the Zhiguli VAZ-2107 family is equipped with strictly rectangular headlights. This allows for better illumination of the road surface at night. The VAZ-2107 headlight is equipped with a new function - adjusting the direction of the light flow depending on the vehicle load. This function is performed through a hydraulic corrector. Bad situations often arise when the headlight becomes damaged, becomes outdated, its elements fail, and this requires its replacement or repair.

VAZ 2107: removal and replacement of headlights

The domestically produced car of the Zhiguli VAZ-2107 family is equipped with strictly rectangular headlights. This allows for better illumination of the road surface at night. The VAZ-2107 headlight is equipped with a new function - adjusting the direction of the light flow depending on the vehicle load. This function is performed through a hydraulic corrector. Bad situations often arise when the headlight becomes damaged, becomes outdated, its elements fail, and this requires its replacement or repair.

Replacing the headlight

Let's first consider the situation when the old headlamp has outlived its usefulness and needs to be replaced. Such cases occur when water gets inside and causes corrosion processes on the reflector or its darkening, as well as when the headlight is completely damaged. Replacement requires the presence of a basic tool and disconnecting the car from the battery. After this, we proceed to removing the unusable headlight:

  1. All power wires are disconnected by removing the plugs;
  2. Removing the hydraulic corrector. To do this, press the plastic lock, turn it clockwise 90 degrees and pull it towards you.
  3. From the outside, the headlight unit is attached to the body of the VAZ-2107 car using three bolts. One is located on top and in the middle, and the other two are located below - on the sides. There may be a problem with unscrewing the bottom bolt closest to the grille. On the other side of this mount there is a fixing nut, which must be held with an “8” key.
  4. The headlight can now be removed to the outside of the vehicle.
  5. The seat for installing a new headlight is cleaned, all fastening bolts are lubricated and installed in the reverse order of removal.

Replacing the headlight

Let's first consider the situation when the old headlamp has outlived its usefulness and needs to be replaced. Such cases occur when water gets inside and causes corrosion processes on the reflector or its darkening, as well as when the headlight is completely damaged. Replacement requires the presence of a basic tool and disconnecting the car from the battery. After this, we proceed to removing the unusable headlight:

Discuss

Select it and press Ctrl + Enter

Global sales of electric cars declined in the third quarter of 2020.

Compared to the same period in 2020, there is a noticeable decrease in sales of electric cars by 10%.

Analysts believe that this phenomenon has two reasons: the total volume of cars sold on the world market has decreased, and indicators for the markets of China and the United States have decreased.

The European market, which along with the USA and China is a priority for the distribution of electric cars, showed an increase in sales by 2.1%.

At the same time, sales of electric vehicles increased from January to November. During this period in 2020, 20% fewer cars were sold.

How to change the headlight glass of a VAZ 2107

Replacing headlights on a VAZ-2107

The Russian-made car of the VAZ-2107 Zhiguli family is equipped with strictly rectangular headlights. This allows for better illumination of the road surface at night. Bloc headlight is equipped with the latest function of adjusting the direction of the light flux depending on the load on the vehicle. This function is performed by a hydraulic concealer. Bad situations often arise when the headlight is damaged, outdated, or its elements are faulty, and this leads to its replacement or repair.

Replacing headlights

Let's first consider the situation where the antique headlight is outdated and needs to be replaced. Such things happen when water gets inside and causes corrosion on the reflector or darkening it, as well as when the headlights are completely damaged.

Replacement requires the presence of a basic tool and disconnecting the car from the battery. We then proceed to remove the unused headlight:

  1. All power wires are disconnected when the plugs are removed;
  2. Removing the hydraulic corrector. To do this, press the plastic lock, turn it clockwise 90 degrees and pull it towards you.
  3. headlamp unit is attached to the VAZ-2107 body using 3 bolts. One is located at the top and center, and the other two. at the bottom. You may have trouble unscrewing the bottom bolt closest to the grille. On the other side of this mount is a mounting nut that needs to be tightened using 8 wrenches.
  4. The headlight can now be removed from outside the car.
  5. The area for the last installation of the headlight assembly is cleaned, all mounting bolts are lubricated and replaced.

READ How to Bleed Brakes on a VAZ 2106 Alone

There are no difficulties; the one-sided replacement procedure will take no more than 15 minutes. The price for a standard headlight unit on a VAZ-2107 ranges from 1,500 to 2,500 rubles.

Glass replacement

It is clear that the headlights are covered with glass, and this is a rather fragile element. And the front part of the car is most susceptible to physical damage. These actions first appear through pebbles that fall out from under the wheels of an oncoming car, also when colliding with foreign objects. Replacing headlight glass on a VAZ-2107 is a pressing issue for family owners. After all, you don’t need to replace a complete set of headlights when replacing glass will cost 150-300 rubles. To replace glass you will need the following tools:

Broken headlight / How to glue glass headlights on a VAZ 2107

Now I will tell you how to insert a new one in about 2-3 hours VAZ 2107 glass headlights

. Pay attention.

How to disassemble a classic spotlight.

Disassemble the headlight

classic because of something wrong with the reflector. Since I haven't found a complete disassembly.

Procedure for removing and installing glass:

  1. It is not possible to remove the glass without removing the headlights, so follow the steps outlined in the previous section.
  2. When the headlight is removed, its surface must be cleaned and the glass must be removed independently, always wearing gloves. Glass can be easily removed if it has significant damage.
  3. If the glass is not damaged, there are two ways:

READ How to Change the External Grenade on a VAZ 2109

a) break it if it is no longer needed;

b) Heat up the hair dryer and carefully remove it, but this will take much longer. You can watch a video on the internet about this method if anyone is interested in this type of removal.

  • Having determined that glass removal will be using method a), we will proceed to its implementation. Break the glass with a hammer and remove all fragments.
  • The glass seat is cleaned of old sealant and degreased.
  • Once everything is ready to install the new glass, apply sealant around the perimeter of the headlight. It is better to use a special transparent sealant to prevent it from coming out.
  • Place the glass on an even layer of sealant and press it down, securing it with tape or string. Leave it to dry like this for about a day. After drying, installation can be performed, which will take no more than 5 minutes.
  • Important! Before breaking the glass, you must remove all the light bulbs to avoid damaging them.

    Replacing the hydraulic concealer

    The purpose of the hydraulic concealer is known, but to replace it it is necessary to imagine its design. It consists of a master cylinder, which is the switch, and an actuator cylinder. The mechanisms are connected using special tubes with liquid. Any failure of one of the elements of the hydraulic corrector entails its complete replacement, since its structure cannot be disconnected.

    READ Replacing the Heater Fan VAZ 2106

    The hydraulic corrector is replaced in the following order:

  1. The hydraulic corrector mount is removed from the headlight and from the switch handle. To remove it from the handle, you simply need to pull it towards you.
  2. The key on the master cylinder nut is unscrewed and removed from the inside of the panel.
  3. After the entire collection is deleted, a new reverse delete is installed.

Knowing the sequence of removing and replacing headlights on a VAZ-2107, you can save not only money, but also the time it takes to travel to a service station. Replacing headlights is as easy as replacing the steering wheel, hence, successful repair work!

How to replace bulbs in the headlights of a VAZ 2107 - instructions for replacing bulbs in a Semerka headlight

Good afternoon dear friends. Today I want to offer instructions on how to change the light bulbs in the headlight unit of a domestic car, the seventh model Zhiguli. Yes, there are few such people left who have a “Seven” in the garage, but many buy it as a first car, a training car, so to speak. And she, as you know, requires attention and care. Therefore, this article will be useful primarily to novice car mechanics who want to learn how to handle and maintain a car themselves, and gain first experience in repairing in a garage.

Replacing lamps is useful not only when they burn out, but also when you want to improve the light in your headlights - install LED or halogen bulbs, or carry out a small “tuning” of the head optics with a lighting device. Today we will touch on a narrowly focused topic, namely how to change the light bulbs in a headlight. Let's remember what is there.

How to remove headlights on a VAZ 2107

There are various breakdowns of the front headlight on the VAZ 2107, and this is darkening of the reflectors, darkening of the glass, cracks or even a break after an accident. Replacing a headlight is very simple and does not cost much. Today we will tell you how to remove the headlights on a VAZ 2107 with your own hands.

We will need:

— open-end wrench 8; - Phillips screwdriver.

Let us remind you that in the previous article we told you how to remove the front seats on a VAZ 2107 with your own hands. Seat damage can occur over time, when the car has already traveled many thousands of kilometers or after a traffic accident.

How to remove a headlight on a VAZ 2107

I will demonstrate the entire procedure on the left headlight, but the right one is removed in the same way. The first step is to open the hood of the car and disconnect the power plugs from the low and high beam lamps, as well as the hydraulic corrector.

Then, from the outside, you need to unscrew the three bolts using a Phillips screwdriver. All these bolts are clearly shown in the photo below.

Two of them can be unscrewed without any problems, but the third one - the one on the far left (in the direction of travel of the car) is fixed with a nut, so you have to hold it with a size 8 wrench from the inside.

After which you can easily remove the VAZ 2107 headlight from the reverse side by lightly pulling it with your hand.

That's all the instructions, as you can see, everything is extremely simple and this repair will take no more than 20 minutes of free time. Installation is carried out in reverse order. The cost of a new headlight on a VAZ 2107 is about 2,000 rubles for the original, with a yellow turn signal.

How to replace low and high beam bulbs

The advantage of the head optics of the seventh model Zhiguli over its counterparts is that it has H4 lamps installed, which are responsible for two types of road lighting. In other models, for example VAZ 2106, separate lamps are used for each light, which, if they need to be replaced, causes unnecessary material and physical costs.

Remove the waterproof protection of the headlight unit . It is made in the form of a plastic casing installed at the rear. It is removed by turning 180 degrees counterclockwise. It is attached with “tongues” that are inserted into the headlight housing and rotated in its grooves.

Disconnect the wiring block . It consists of three sockets: ground, low beam, high beam.

We snap off the wire retainer . It is made of elastic wire and securely holds the lamp in the reflector socket.

Remove the lamp from the socket. If it burns out, we replace it; if it was removed purely to replace it with an LED one, then it is recommended not to touch the bulb with the filaments with your hands. Otherwise it will become cloudy. Why? - Don't know!

Changing side lights

Next to the low and high beam lamps there is a headlight bulb. It is also installed in the headlight reflector. To replace it, just pull the cartridge and it will come out.

It is not uncommon for him to not want to get out. Therefore, until the low beam lamp is installed in place, we put our finger into its hole in the reflector and use it to push out the oversized bulb from the inside.

To replace the lamp, turn its base in the socket 90 degrees, it is removed from it. We perform assembly in reverse order.

Replacing the front headlight on a VAZ 2107

It is not necessary to remove the headlights on a VAZ 2107 so often and in most cases they are only required to be replaced in the event of an accident, when it breaks, or due to darkening of the glass or reflectors. Also, there are cases when a hit from a stone breaks not only the glass, but also the reflector itself. In order to replace the headlight assembly yourself, you will need:

  • Open-end wrench 8
  • Phillips screwdriver

Instructions for removing and installing the headlight of a VAZ 2107

I will demonstrate the entire procedure on the left headlight, but the right one is removed in the same way. The first step is to open the hood of the car and disconnect the power plugs from the low and high beam lamps, as well as the hydraulic corrector:

Then, from the outside, you need to unscrew the three bolts using a Phillips screwdriver. All these bolts are clearly shown in the photo below:

Two of them can be unscrewed without any problems, but the third one - the one on the far left (in the direction of travel of the car) is fixed with a nut, so you have to hold it with a size 8 wrench from the inside:

After which you can easily remove the VAZ 2107 headlight from the back side by lightly pulling it with your hand:

That's all the instructions, as you can see, everything is extremely simple and this repair will take no more than 10 minutes of time. Installation is carried out in reverse order. The price of a new headlight on a VAZ 2107 is about 1,600 rubles for the original, with a yellow turn signal.

Turn signals

Also, turn signals are installed in the VAZ 2107 headlight unit. They are part of the block, so we will look at them in this instruction. To remove the cartridge:

  1. Disconnect the wiring block
  2. Turn its body half a turn counterclockwise
  3. The fasteners come out of the latches of the headlight housing, the socket is pulled out

In order to change the light bulb in the direction indicators, turn its base a quarter turn so that the latches come out due to engagement in the socket and remove it.

Work order

Some headlight repair operations should be performed indoors to avoid water and debris getting into the bonding area. In general, replacing a damaged element includes the following steps:

  1. Disconnecting the unit from the on-board network of the VAZ 2107 by uncoupling the connectors of the turn signal and the headlight lamp.
  2. Removing the body from the body opening using a Phillips screwdriver.
  3. Removing shards of broken glass, in this part of the operation you should be careful not to cut yourself.
  4. From the junction of the parts, it is necessary to remove the remaining adhesive mass using a flat screwdriver.
  5. The next step is to clean the unit and degrease it with a solvent.
  6. Using a dispenser syringe, apply a small amount of glue along the contour evenly without gaps or breaks.
  7. We place the transparent element in its intended place, press it and fix it using disposable devices or tape.

This is interesting: Replacing the battery in a Volkswagen Touareg key

As the glue dries, the headlight element of the VAZ 2107 is installed in place; it is recommended to change both parts at the same time; during operation they tend to become cloudy and this will become noticeable even with a cursory inspection. The new transparent glass on the headlight of a VAZ 2107 car, which was replaced on our own, is pleasing to the eye. At night, better road lighting is provided.

As a conclusion

Changing the lamps on the headlights of a VAZ 2107 is not a difficult task. The main thing is to act carefully, because not so often a living person looks into them. Some parts may become “bitten” and will not want to be removed the first time. With a lot of force, there is a chance of breaking them. For example, when replacing dimensions, they often jam in the reflectors. There have been cases in my practice where they were “torn out” with a piece of that same reflector, and this was a replacement for the entire headlight.

So, you need to be careful, the “Seven”, although a strong machine, can tolerate and forgive you a lot, but some of its elements require a certain “tenderness”. A car is like a girl - the way you drive it is the way you will live with it - a popular automotive saying.

Rating
( 2 ratings, average 5 out of 5 )
Did you like the article? Share with friends: