Scher khan logicar 4 how to set the clock

Author: Victor

The Sherkhan Logicar 4 security system gives the user the ability to control the car via a radio channel using a key fob communicator. The presence of feedback helps to continuously monitor the condition of the vehicle.

[Hide]

Autostart based on temperature and voltage

Activation of the limit switches of the Sherkhan Logicar 4 system is carried out only after stopping the car engine. The same goes for the kick controller.

The control unit is installed in a hidden place in the cabin, for example, behind the instrument cluster. The microprocessor module is installed with the connector down, which avoids moisture getting inside the device when drops of condensation flow down the wires.

The key fob communicator can be used to independently control a second car if it also has the SCHERKHAN MAGICAR 7 system installed. To switch the key fob to control mode for a second car, press the key fob buttons (I+II) for 2 seconds.

You can lock the key fob communicator if you want to prevent accidental key presses.

At home or in a workshop, the possibility of transmitting a signal is determined by a tuned radio receiver that receives waves in the range of 280-450 MHz. Depending on the intensity of the sound produced by the remote control, the current state of charge of the batteries is determined. The role of the antenna is performed by a loop of copper wire.

Self-diagnosis of all elements and equipment of the anti-theft system when activating and disabling the protection. Activation of the security mode is accompanied by testing of all devices connected to the control unit.

It is important for the driver to carry out these manipulations within 4 seconds. Otherwise, you will have to repeat the steps again.

After the car owner no longer needs auto start on the alarm, this option can be disabled. You must select the appropriate function on the key fob screen and switch it to inactive status. After this, automatic motor activation will be switched off.

A key fob with a large LCD display provides the owner with comprehensive information about the condition of the car at a distance of up to 1.5 km. The system has an autostart function and can control the start of any engine based on several events or a direct command from the key fob. The key advantage is the built-in module for coordination with the digital information buses of CAN and K-line vehicles.

Why does the alarm not work and how to fix it?

Reasons why the system does not respond to the key fob or functions incorrectly, as well as recommendations for eliminating them.

Operating instructions for car alarm Scher-Khan Logicar 4

The siren is installed in the engine compartment of the car. The element must be installed secretly. The horn is directed downward to prevent moisture from accumulating inside the device.

Car alarms Sherkhan Magikar 4, Logikar 4 are mid-level security systems with wide functionality. At the moment, Sherkhan Magikar 4 is no longer relevant; the model has been discontinued from mass production. The main reason is insufficient protection against hacking, interception of pulses, and signal transmission and reception.

Magicar 5 is a security alarm with two-way communication that operates at a distance of up to 1.5 km.

According to users, the Sherkhan Logicar 1 security system has the following advantages:

• High build quality. The components of the device are enclosed in a durable housing, which prevents them from breaking as a result of various physical influences.
• Reliability. The installation of this alarm system guarantees the vehicle owner the safety of the vehicle.
• Functionality. The Logicar 1 model has the necessary options that can protect the car.
• Low cost. The average price of this anti-theft system ranges from 3,450 to 5,000 rubles.

How to turn on Webasto from the Sherkhan remote control button?

It provides protection against electronic hacking and scanning, as it is encoded and transmitted using its own frequency, which cannot be intercepted by any existing method.

It should be immediately noted that the basic set of its functions provides the ability to automatically start the engine, so the driver does not have to configure autostart as an additional function. The instructions for installation and use are simple and there are no difficulties in using it.

For user convenience, manufacturers have provided a timed start in the system. Thanks to this, the car engine will turn on at the same time every day. The interval will be up to 24 hours. This option is useful when the car is parked and is not within the range of the remote control (remote engine start).

This security system, as mentioned above, is designed for different types of power units (diesel and gasoline) and is ideal for both domestic and foreign-made cars of different classes.

The timer is turned off by simultaneously pressing buttons 4 and 2. When the option is enabled, a mark with the inscription “Timer” will light up on the display.

The following key combination will enable autorun.

1. Press button 3 for a while. An image of smoke will appear on the screen, indicating the engine is starting.
2. The autostart time will countdown. Briefly press 3 and you will stop the timer.
3. The mode is exited by long pressing key 3.

The “Battery Save Mode” is used to reduce the power consumption of the key fob communicator. In this mode, the key fob has a shorter range and provides feedback to the system only when arming and disarming with this key fob. The vibration alert function does not work in Battery Save Mode.

Which key fob buttons should be pressed when setting up the autostart function of this car alarm model? The instructions for starting the engine from the key fob are universal and are suitable for Magicar A, B, 1, 2, 3, 4, 5, 6 mini, 6, 7 S, 8 S, 9, 10 mini, 11, 12, 13, 14.

1. Enter menu 2 by holding down keys 2 and 4 simultaneously for two seconds. A beep will sound and the lights will blink once.
2. Select the desired option (2-20) from the menu by clicking button 4 twenty times. Each press must be accompanied by sound and light signals.
3. After a few seconds, the device will confirm that the desired mode has been selected correctly with twenty beeps.
4. Starting the engine from the remote control is programmed with button 4. Confirmation of this is four sound signals and blinking emergency lights.

In the key fob communicator function programming mode, the time between pressing the key fob buttons should not exceed 15 seconds, otherwise the key fob will automatically switch to system control mode. In the mode of programming the functions of the key fob communicator in the range from step 2 to step 10, it is possible to go to the previous step; to do this, you need to briefly press button III of the key fob communicator.

For Logicar 4, the operating instructions describe all actions that may be required when programming and using the alarm.

Instructions for use

Before using the alarm, you must carefully study the operating instructions.

Entering a personal password without a key fob

How to enter a personal password if you do not have a pager:

1. The car door locks are opened with a key, after which the alarm mode will go off.
2. The key is installed in the lock and the complex is activated. The engine won't start.
3. The emergency mode entry key is pressed for two seconds. The car's turns will blink once, and the alarm mode should turn off.
4. Within five seconds, click on the Jack button. The system LED indicator will blink.
5. While the diode light is blinking quickly, you must have time to enter the first digit of the password within four seconds. If it is 3, then the service button is clicked three times. The time interval between presses should be less than 1.5 seconds. After four seconds, the car's turning lights will blink once, indicating that the first digit has been successfully entered.
6. The steps described in the previous paragraph are repeated for other password digits. If the code entry procedure was completed correctly, the siren will emit two beeps. The lights will blink twice. If the password was entered incorrectly, the alarm will activate the alarm mode.

Reset

How to reset settings to factory settings:

1. Enter service mode. Turn off the alarm and ignition in the car. Simultaneously click on the first and fourth pager keys and hold them down for two seconds. The alarm siren should emit one signal.
2. Triple-click the third pager key. With each click, the siren will emit a sound signal, and the car's lights will also blink. After a few seconds, the siren will sound three times and the turn lights will blink three times. This indicates a successful factory reset.

Enabling the protective function

Features of the protective function:

1. The function is activated by using the first button on the pager body.
2. The car lights will blink.
3. After activating the protective mode, the LED indicator of the alarm status will blink at intervals of one second.
4. On the main pager screen, the car's headlights will blink five times. The padlock indicator will also flash, and then the padlock icon will remain lit on the screen.
5. The pager will emit one beep to confirm that the security mode has been activated.

The Alarm Installation Center channel provided an overview of the Logicar 4 security complex in its video.

Preparing the car for autostart

How to prepare your car for remote engine start:

1. At the end of the trip, the power unit does not turn off; the transmission selector is set to neutral mode.
2. Pull the handbrake lever. Do not keep your foot on the brake pedal.
3. The ignition key is turned to the OFF position, after which it is removed. If the car door locks are locked, the security system will intercept the ignition. After this, the power unit will continue to function for two minutes.
4. Within two minutes, open the door and leave the car.
5. The door closes, after which the engine stops. This will happen provided that you have not activated Turbo mode in advance.

In accordance with the instruction manual, Tatyana Kulikova showed how to autostart the engine upon command from a pager.

Characteristics of car alarm Sherkhan Logicar 4

For Scher-Khan Logicar 4i, the instructions prescribe the following reset algorithm:

• simultaneous pressing of buttons 1 and 4;
• pressing key 3 three times (the siren will sound 3 beeps and the turn lights will flash).

The Sherkhan Logicar 4 car alarm has proven itself well in the security systems market, thanks to a large range of options and functions.

The Scher-Khan brand quickly became popular, and the company invested a lot of time to gain recognition not only in Russia, but also to enter the international market. The reliability of this brand of car alarm is beyond doubt, which has earned it everyone’s trust.

The system is perfectly adapted for Russian conditions - it operates in the range from -80 C 0 to +50 C 0.

• Operation of the starting system with all engines (petrol and diesel).
• Possibility of implementing the engine autostart function on cars with manual and automatic transmissions, including those equipped with a Start/Stop button.
• Programming engine auto start time.
• Automatic engine start every 2, 4 or 8 hours.

How to set up a MOBICAR car alarm

The MOBICAR system implements modern developments in the field of car protection against theft. The package includes a compact control key fob, digital shock sensors, and a small processor unit. It’s not difficult to understand the setup, despite the large number of built-in functions.

Among the main functions that need to be configured in the MOBICAR car alarm are:

• car autostart;
• setting automatic alarm activation;
• sensitivity adjustment;
• turning the shock sensor on and off.

The first thing you should learn is to start and stop the car using the key fob. This is a convenient feature that allows you to warm up your car in winter while you are leaving the house. Or turn off the engine if you stay in the store for a long time, so as not to overheat the vehicle.

Setting up engine autostart

You can start the engine remotely from the key fob only in security mode. For a vehicle with a manual transmission, it is necessary to prepare for starting, for this:

1. With the engine running and the doors closed, as well as the parking brake on and the brake pedal lowered, press button III of the key fob.
2. If the car has an ignition switch, the key must be removed under the conditions described above. If there is a Start/Stop button, you do not need to press it.
3. After the completed manipulations, get out of the car and press the security button (short press the I button).

To autostart Scher-Khan on this alarm model, you must press the following buttons:

1. Long press on “III”, and an image of smoke will appear on the key fob, which means the engine will start.
2. The autostart time countdown will begin; to restart it, briefly press the same button.
3. To turn off the mode, hold III on the key fob until a beep sounds.

You can set the autostart time manually, and also select the mode to turn off the motor at a given temperature. For this:

hold I+IV

Read more: What is MBR with a girl photo transcript

When setting the warm-up time, you need to take into account the climate mode, and you can also select the functions of morning and evening autostart. With such simple manipulations with the key fob, you can set any car to autostart. Do not forget that with a manual transmission it is necessary to carry out preliminary preparation according to the instructions described above.

Switching to car control after autostart

After performing a remote engine start, you should take control of the car into your own hands when you get to it. For this:

• press the brake pedal;
• disengage the standing brake;
• remove the automatic transmission from parking mode.

In this case, you do not need to press anything on the key fob. After performing one of the listed manipulations, you will hear a sound signal and one blink of the headlights, which indicates that autostart is disabled.

Possible errors when enabling the autorun function

If you do not meet the conditions for enabling autorun, the system will generate a number of errors that need to be eliminated. Among all the codes on the key fob there are:

• ER:01 – the engine is on, you need to turn off the car to continue the settings;
• 02 – ignition on: turn off and remove the key to continue working with the alarm;
• 03 – the door is open. When the doors are unlocked, the security mode does not turn on;
• 04 – hood open;
• 05 – not set to autostart due to lack of preparation in cars with manual transmission;
• 06 – standing brake is not engaged;
• 07 – brake pedal pressed;
• 08 – the motor does not work, it is worth starting the engine and continuing with the settings;
• 09 – trunk open;
• 10 – ignition is set incorrectly;
• 11 – 19 – there was an alarm.

If autostart of the car from the key fob does not work, check for these errors, as well as whether the alarm itself is installed correctly. The initial setup and installation should be carried out by a car service specialist in order to avoid disastrous consequences of device failure.

Important! To correctly and quickly set the autostart time or set up an alarm, carefully read the operating instructions, which describe in detail all the functions of the device.

Features using a specific example

The popularity of Scher-Khan alarms, especially the Magicar and Logicar families, is primarily due not to their any outstanding qualities, but to aggressive promotion in car dealerships at the time. In many cases there was practically no alternative as additional equipment.

When you press the button IV of the key fob for 2 seconds. The STSTS will enter PANIC mode or JackStop mode (anti-hijacking) - programmable function 2-4. The siren will sound for 90 seconds, the hazard warning lights will flash for 90 seconds, the starter (ignition) lock will operate in accordance with the selected function value 2-4. After 90 sec.

If the security system does not respond to commands from the main key fob, you need to use an additional one. If problems arise far from home, turn off the system using the emergency method, i.e. entering a secret code.

By briefly pressing buttons I+II of the key fob simultaneously, you can turn the siren signals on or off. At the same time, the key fob signals and alarm signals will work as usual.

It is interesting to know that the Starline alarm system, especially its model Starline A 91, also has similar functions, but unlike Logicar 4, its response time to turning off the starter is much longer.

If the car has a turbo engine, then after prolonged operation at high speeds it is not recommended to stop it immediately. The engine must idle for some time necessary to cool the turbine. For this purpose, the SCHER-KHAN MAGICAR IV STSTS has a TURBO mode (turbo timer). If the TURBO mode is turned on, then at the end of the trip the engine will run for 2 minutes.

Arriving at the car dealership, I found out the cost of my future beauty - and realized that there was no chance of anything other than mats from special stages. After a bit of a fight about this with the general manager of the car dealership (so little), we finally settled on the floor mats. But we were lucky. The manager comes and offers a discount of as much as 10k, it was a sin to refuse. If the car was started not from an additional key fob, but from the main one, and incorrect information is displayed on it, then you should look for an error made when installing the alarm system.

Description of the alarm key fob feature

You can disable the shock sensor and auxiliary sensor. Press and hold simultaneously for 2 seconds. buttons I+III of the key fob, as a result the sensors will be turned on or off. The indicator that the sensors are turned off is the presence of the corresponding symbol on the liquid crystal display of the key fob.

The delivery set of Sherkhan Logicar 4 includes only one limit switch; the remaining devices for the doors and hood will have to be purchased separately.

The Sherkhan Logicar 4 security system gives the user the ability to control the car via a radio channel using a key fob communicator. The presence of feedback helps to continuously monitor the condition of the vehicle.

Installation and connection

For Scher-Khan Logicar 4, the installation instructions require the following steps:

1. Preparing the car. Before connecting the alarm, the on-board network must be de-energized. To do this, turn off the ignition and disconnect the battery terminals.
2. Installation of the processor unit. The device is mounted in a place that is inconspicuous to potential criminals, such as behind the dashboard. To do this, remove the decorative trim of the steering column and unscrew the screws holding the shield. The block is placed in a free space and secured with screws.
3. Siren installation. The part is installed in a hidden place. The horn must be turned down. The siren must not be placed near the engine.
4. Installing the Valet button. The part is used for emergency shutdown of the alarm mode, so it must be mounted in a place inaccessible to criminals. The button can be hidden under the standard wiring harnesses and masked with electrical tape.
5. Installation of limit switches. The kit includes 1 controller, which is equipped with the hood or trunk. The remaining switches will have to be purchased separately. To install the parts, holes are drilled on the doors, after which the decorative trims and handles are removed.
6. Installing an engine blocker. The device is embedded in the ignition switch block.
7. Installation of the sensitivity sensor. The part is installed in the middle part of the body. The wiring is routed through holes in the partition separating the engine compartment from the passenger compartment. After installation, adjust the sensitivity of the sensor.

Read more: Comparison of freelander 2 and rx400h

Connection diagram

The system components are connected to the head unit and power source according to the diagrams attached to the instructions. All power circuits are equipped with fuses of the appropriate rating. After connecting the cables, you need to check the functionality of the car alarm.

Characteristics of Scher-Khan Logicar 4 and Magicar 4

Changing the temperature display format "°C" or "°F". The character corresponding to the current format flashes.

If autostart fails, check whether the car starts with the key. If yes, then in this situation, reprogramming the autostart with a decrease in the startup frequency and an increase in temperature will help. The car key fob emits a sound and vibration signal if strange things happen to the car in the absence of the owner (burglary, breaking glass, trying to start it). The key fob will also give a sound and vibration signal if the system detects any malfunction in the security system unit or key fob, or in the operation of the car itself.