Front seats

Consistency, accuracy and attentiveness are all you need to successfully install covers on the front seats.

1. It is not necessary to remove the front seats to install the covers. All work can be done directly in the salon.
2. Remove the head restraints from the seats.
3. Pull the cover over the top of the back of your chair.
4. Usually there are three elastic bands on the central seams of the covers. They must be passed between the back and the seat so that each element of the product is exactly in its place.
5. Now we fix the position of the covers using hooks that are placed under the chair itself.
6. Carry out a similar operation with the lower part of the chair.
7. The locking hooks are also inserted from the bottom so as not to interfere with the driver and passenger.
8. All that remains is to pull the material onto the headrest. How to install a turbine on a VAZ 2110

Removing the front seats

To perform dismantling you will need a TORX E10 key . The horizontal position of the seats is adjusted as follows: the bracket “4” shown in the photo is pressed up, then the seat is moved forward or backward. To gain access to the fastenings, you need to move the chair back all the way. Check the picture:

How to remove the front seat in Kalina-2

If the indicated action is completed, remove the two “3” screws using a TORX wrench. Then the seat is moved all the way forward. On the back of the slide there will be two similar screws, which are also unscrewed with a TORX key.

When the fastening screws are missing, the seat is dismantled along with the slide. Before installation, it is recommended to apply Fiol-1 lubricant to the rubbing parts (10 grams per seat).

Back row

Depending on the tailoring and manufacturer, these products may differ from each other. But mostly the installation principle is the same everywhere.

Removing the rear sofa

First, let's look at how to dismantle the cushions, that is, the seats.

Loop “3” must be pulled towards you to tilt one of the pillows forward. Then the brackets “1” are removed from the stops “2”. Nothing more is required.

When there are no pillows, you can remove the backrest. By pressing the handle “3”, the backrest is tilted forward (see photo).

How to remove the back of a sofa in Kalina-2

The backrest is secured from below with two nuts “1”. Each nut is unscrewed with a 13 mm spanner.

The back of the sofa is held in place by nuts

Note that, if desired, you can remove the brackets themselves, which are a fastening element. To do this, unscrew the screws “2”, using the same key 13.

Let's list the whole sequence again:

1. By pulling loop “3” towards you, remove the pillows;
2. By pressing the fastening handle, the backrest is tilted forward;
3. The fastening nuts are unscrewed with a spanner.

As you can see, nothing complicated. There is no need to apply lubricant to the fastening parts here.

source

Eco-leather

Eco-leather is an excellent modern material from which excellent cases

using the latest technologies. The material is breathable and does not contain polyvinyl chloride components, which ensures comfort for the driver and passengers and does not contribute to fogging of the back and legs when in contact with eco-leather. Covers for VAZ 2110-2112 (if they are put on correctly) look like the original Lada upholstery. How to sew covers and reupholster the seats of vases with your own hands. Due to special micropores, the products allow steam and moisture to pass through, but at the same time reliably retain water. How to open the door of a Lada car. How to change the radiator, removal and installation on a VAZ 2114. Air permeability indicators significantly exceed even the highest quality genuine leather. How to properly put seat covers on a VAZ - features. The only drawback is the rather high price.

Eco leather

Rear seat repair

The backrest of the rear seat can be easily removed. To do this, you need to lift it slightly so that the staples are separated from the latches. To remove the saddle, you should grab it by one edge with both hands and pull it up strongly, this will ensure it moves away from the lock. Then the same is done with the other side, after which the repair can begin.

Read, it may come in handy: Instructions on how to install electric windows on a VAZ 2107 with your own hands

Fastening the front seats

Many owners of the VAZ 2107 model, which has already been discontinued, want to decorate the interior by installing seats from other car brands. This primarily applies to the front seats. In this case, you should pay attention to UNP products. Which seats are suitable for VAZ from the company’s catalog? Almost everything. You can choose anatomical seats, such as “Boxer”, “Racer”, “Sport”, etc. They are quite lightweight, since the frame is made of durable fiberglass, have a steel frame and a bucket shape with side supports, which increases the quality of driving. The seat backs often have reinforcing pads, and the headrest is integrated. The seats are thin due to fiberglass, which gives additional space to passengers sitting in the back.

Sports UNP seats are perfect for the VAZ 2107. They have maximum lateral support, a one-piece design, an integrated headrest, allow you to install sports belts (3-6 attachment points), additional pillows, including lumbar support. All UNP products can be easily integrated into any car due to the availability of installation adapters, which are sold along with the seats. In the case of the VAZ 2107, we are talking about the slide and side mounting brackets.

Installing a sports or anatomical car seat is not a cheap pleasure, so many car enthusiasts want to know whether seats from a foreign car will fit in a VAZ 2107. Experts believe that almost anything that fits the dimensions can be supplied if it is possible to carry out high-quality welding work. For example, in the “seven” you can try to put parts from Opel (Vectra A, Cadet) or from Skyline.

It should be borne in mind that the installation of non-original seats may raise questions from regulatory authorities, since such an operation is considered to be making changes to the design of the machine.

Covers or new interior?

Many VAZ 2110 owners are seriously thinking about upgrading their car. The original seats aren't great, but they certainly aren't terrible either.

Whatever one may say, a person always strives for maximum comfort. Therefore, thoughts about completely or partially replacing the interior are more than justified.

Finding completely new seats that would fit the “ten” is not difficult now. Some even manage to find leather goods. Whether to take such a step or not is a purely personal decision.

Cases are a much more budget-friendly and versatile solution. How to change the injector on a VAZ 2110 VAZ 2110 replacement. How to check the lambda, but the oxygen sensor can simply give a Lada VAZ 2110 - 2112. Even if you install a new interior

, you will feel sorry for spoiling it with regular use. Because? That's right, you decide to put covers on it.

Purchase and install a new salon

It makes sense only if the original VAZ seats give you discomfort, you are uncomfortable sitting in these chairs and traveling long distances on the road. If the question is purely about appearance, beautiful original covers can change the perception of the VAZ 2110 interior in the most amazing way, so it’s not worth spending money on a set of seats.

Hyundai Solaris › Logbook › Seat heating does not work, how to remove it

factory covers

Which seats fit without modifications?

If there is a desire to change the seats in the cabin of the seven, then you need to install seats from a foreign car, which are characterized by increased comfort. In this case, a problem arises - the cost of seats from foreign cars is sometimes 2 times higher than the price of new seats for the seven. To reduce costs, you need to choose used models of chairs that will cost no more than new factory models.

To install new seats in the interior of the seven from a foreign car, the following factors must be taken into account:

1. Dimensions or dimensions of devices, which should not be much larger than standard ones. There are no problems with this, since seats from foreign cars are not only comfortable, but also often have small dimensions, that is, they are compact.
2. Mounting type. The brackets for the new seats, ideally, should fit the mountings in the cabin, so that they can be installed in the classic cabin without modifications. This factor plays an important role, since the fastening affects not only the possibility of placing seats in the VAZ 2107 interior, but also the safety of their operation. In most installation options, it is still necessary to make or select some spacers, washers or bushings in order to align the mounting points of the skid and the car body. But there is no need to weld or cut anything with a grinder.
3. Shape and type of cladding. These are secondary factors that affect the comfort and appearance of the cabin. Most models of seats from foreign cars have a quite presentable appearance, and their installation does not require the use of covers.

By installing or replacing VAZ 2107 seats with analogues from a foreign car, you can simultaneously obtain benefits such as increased comfort, as well as changing the interior design for the better. No matter what model of foreign car the seats in the seven are installed on, they will still look better than the standard ones. Taking into account the factors described above, it is necessary to figure out which car the seats for the seven are suitable for. Preference should be given to the following brands:

• The 1993 Toyota Corolla E100 is an ideal option, since the interior of the LADA 2107 fits not only front seats without any special modifications, but also a rear sofa. In addition, devices from a car of this year of manufacture will not cost exorbitantly, so you can buy them very cheaply at a disassembly site.
• The 1996 Mercedes W210 is another good option. Reviews from car owners who have installed Mercedes seats indicate a number of advantages - no need for modifications, comfort, improved interior design.
• Toyota RAV4 - you also don’t need to make any modifications, you just buy, change and enjoy.
• Ford Scorpio - devices from the Ford brand are distinguished by their presentability. By installing such seats, you can enjoy long trips in a domestic car.
• Audi A80 - can be made without major modifications. The result of the replacement is a high quality of comfort, a large number of controls and settings, as well as a change in the interior of the cabin.
• Mazda 6 - fits perfectly under the standard brackets of the classics.
• Ford Recardo - you can completely install both the front and rear seats on the VAZ 2107.

Read, it may come in handy: What kind of torpedo can be installed on a VAZ 2107

You can also install devices from car brands such as Skoda and Fiat. However, there are some features that need to be taken into account - this is a shift in the center of gravity. Having installed such chairs, you will need minor processing in the form of making a couple of holes, performing additional fastening. This will increase the stability and reliability of structures.

If desired, you can put seats in the seven from almost any modern car. And now their choice is huge. Such chairs can have all kinds of electrical adjustments, separate heating of the back and cushion, leather chairs can have ventilation, as well as a massage option.

There are a sufficient number of options without modifications, and which one is better to choose - it all depends on the finances, availability and desire of the car enthusiast. If you choose devices from Volkswagen, Nissan and Peugeot cars, then you cannot do without modifications. If you are sure that these brands have the best chairs, then if you wish, you can insert them into 2107, but you will have to modify the fastenings.

Spacers for the slide to level the tilt of the pillow

Removing the rear seat

The work is shown on the example of the left side of the seat.

The cushion and backrest of the right side of the seat are removed in the same way.

Lifting the rear seat cushion by the strap, use a 10mm socket to unscrew one nut securing each hinge to the floor.

Using a 13mm socket, unscrew the two nuts securing the backrest brackets to the floor on the left and right sides.

Having folded the seat back, use the same tool to unscrew the two bolts securing the backrest brackets on the left and right sides.

Install the backrest and cushion on the left side of the seat in the reverse order.

source