An irreplaceable part of a car is the rear view mirror. It serves to provide the driver with the necessary visibility and allows him to control situations on the road. Such devices can have different shapes and sizes, as well as functional features. Like any other part of the car, side rear view mirrors sometimes fail. In most cases, this problem occurs precisely when the driver is not near his vehicle. For example, side mirrors often break when a neighboring vehicle is parked. The driver of a neighboring car can easily knock off the rearview mirror. Coping with such a nuisance is not as easy as it might seem at first glance. If the mirror is severely damaged, it will need a complete replacement. Which is very unpleasant for its owner, since it costs money, although not as significantly as replacing the engine or other parts that make it up. How to remove the side rear view mirror will be discussed in this material.
There are several ways to remove glass:
1. Cut out the seal. This method is the simplest and safest. However, when installing glass you will need to buy a new rubber seal, which is not cheap.
If the owner of a domestic car can find this part in any store, then the owner of a foreign car will be forced to wait a long time for his order.
Procedure for performing the operation: using a sharp knife, make a cut along the entire seal along the contour of the glass. It is very important not to scratch the glass surface itself. After pressing a little on the glass from the inside, you can easily remove it.
2. Squeeze out the glass. This method is somewhat more complicated, but after it both the glass and the seal will remain intact. The first step is to remove the external seal retainer, if there is one. The design of some cars does not provide for the presence of this element. Afterwards, from the inside, using a flat screwdriver, you need to pry the seal a little. It is best to do this at the top of the glass, and by lightly pressing on the surface of the glass with your palm, disengage the seal. Under no circumstances should you press hard on the glass. It may simply crack. Also, you should not hit the glass, the result will be disastrous. After this, you need to move a little to the side and release the seal. Moving 5-10 centimeters at a time, it is necessary to completely disengage the seal in the upper part. If after this the glass does not come out, then it is necessary to perform a similar operation with the seals in the side parts. To prevent the glass from breaking on the hood of the car, it is necessary to lay a soft cloth; if the operation is performed together, then an assistant should hold the glass from the outside.
3. Break the glass. If the glass is not of particular value. But on the contrary, a seal is needed, then the best solution would be to break the glass. However, when breaking glass, it is very important not to overdo it, otherwise you can cover the entire interior with fragments. It's better to hit from the inside.
The operation of removing a car windshield is not fraught with any difficulties. It will be a little difficult only for beginners. Subsequently. Having dismantled the glass two or three times, any car enthusiast will remove the glass in 5-10 minutes. In a similar way, you can remove the rear window of a car.
Necessary tools for windshield removal
The glass itself is held in the car body using a special rubber sealant. To dismantle the glass, you need to cut it along the entire perimeter of the glass.
To do this, it is recommended to acquire the following tools:
- a special knife for removing windshields;
- faceted string;
- tube gun (new sealant is in the tube);
- clean rags.
First, you need to carefully protect the plastic panel in the cabin. If you are replacing it yourself, it is better to temporarily dismantle it altogether to avoid accidental scratches.
Now, using a string or a special knife, the old sealant is cut through. The glass should be removed using specialized suction cups that have ergonomic handles.
We recommend preparing in advance the place where the damaged glass will be placed. When dropped, it will break into a huge number of small fragments. Nobody needs extra work.
Windshield installation
When installing a windshield or side glass, use a special glass gluing kit from Liqui Moly
Good luck on the roads!
Let's disassemble the mirror: how is it done?
By disassembling a side mirror we mean removing the mirror element located in the plastic housing of the structure. Performing this action is necessary if the mirror element is damaged, or if the driver wishes to paint the plastic element a different color. In other words, it is recommended to disassemble and separate the glass from the plastic case if these elements are manipulated separately. The mirror in the case is mainly held in place by plastic latches located on the reverse side. There are 2-3 of them on each side. To remove the mirror from the housing, do the following:
- Warm up the plastic latches with a household hairdryer for 3-4 minutes;
- Remove the mirror using a plastic spatula or flat-head screwdriver;
- Place a piece of fabric on the plastic part of the body where the spatula (screwdriver) will stick through;
- Insert the tool and move the mirror;
- Perform the action on the other side of the body;
- Detach all excess from the glass and remove the mirror element.
The difference in methodology may vary slightly depending on the car model. Sometimes the space under the mirror element is empty or filled. However, such dismantling should not cause any difficulties for the motorist.
Watch the video on how to remove the side rear view mirror:
Published: February 19, 2020
How to change a windshield
Should you replace the windshield yourself or trust the professionals? Everyone decides for themselves. But the nuances of this common repair operation are useful for everyone to know.
Despite the frightening scale of the work, there is nothing difficult about replacing a windshield. This operation can easily be performed independently even by someone who has never done anything like this. But it’s worth taking a partner to help. And not only to maintain morale - some operations are very inconvenient to perform alone.
However, I do not recommend changing glass on expensive cars for beginners. The design of their additional glass seals is usually complex - they are easily damaged when removing and installing them. In addition, such cars have light and rain sensors, and may also have a built-in antenna and heating - all these devices must be connected correctly.
- Before you get down to business, you need to purchase new glass. The assortment is now rich, and searching will not cause problems. The simplest and at the same time expensive option is original glass. If you want to save money, search online forums dedicated to your car and you will find a good replacement. By the way, it could be the same original, only without the company mark, and therefore cheaper.
- When purchasing, look at the end of the glass and evaluate whether the triplex layers are well aligned and whether the adhesive layer is coming out excessively. The stripe at the top of the glass is not for everyone. For tall drivers and those who prefer a high seating position, the border of the color transition will cut the view in half. This is not only inconvenient, but also unsafe. Pay attention to whether the fastening element for the interior mirror is glued - there will be less hassle during installation.
- Another necessary thing is a glass gluing kit. It’s better not to take a really cheap one; the price of a decent set starts at 1000 rubles. When choosing, pay attention to the curing time of the sealant. Please note: everything included in the kit will be used up. You will also need a caulk gun.
- We replace glass only at positive temperatures, ideally not lower than 15 degrees. Remove all decorative windshield seals. Typically, the more expensive the car, the more seals there are. For example, on the Largus, which we chose as an experimental model, there is no top seal at all, the side ones are combined with the door seals - and only at the bottom there is a small decorative strip of rubber. We dismantle the windshield wiper arms. From the inside we remove the upholstery of the front pillars.
- If curtain airbags are installed, disconnect the battery in advance to protect against accidental deployment. And be careful not to damage the wiring.
HOW MUCH DOES THE SERVICE COST?
- Glass replacement services are very common. During the warm season, it is even carried out by mobile teams - the glass will be changed right in the customer’s yard. Companies specializing in glass replacement charge an average of about 2,500 rubles for work. It is best to contact such workshops - they have a wealth of experience and reasonable prices.
- And glass for popular models is usually available. But it makes sense to go to the authorities when it is not you who pay, but the insurance company. For example, they will charge approximately 15 thousand rubles to replace the windshield on a mid-size crossover.
Helpful tips when replacing your windshield
A few recommendations that will allow you to install your windshield as efficiently and reliably as possible:
Don't skimp on glue. The windshield does not change often enough to choose the cheapest adhesive to replace it. Choose a composition from trusted manufacturers, consult with consultants in specialized automotive stores. Be sure to look at the glue at what temperatures it can retain its properties;- After replacing the glass, do not slam the doors. When the glass is just installed, carefully close the car doors, especially if they have the windows up, otherwise the air flow will lead to excess pressure from the car interior onto the glass;
- Work only with gloves. You should not neglect construction gloves when replacing glass, otherwise there is a high risk of cutting yourself. It is also recommended to wear safety glasses so that if glass falls, glass shards will not bounce into your eyes;
- Don't rush your trips. After installing the windshield, you should wait until the glue dries. The minimum is 24 hours, but it is better to avoid traveling for 2-3 days. Also, do not rush to wash your car, at least 48 hours;
- After installing the new windshield, replace the windshield wipers. Old windshield wipers can cause instantaneous scratches.
By following these simple rules, as well as the instructions for removing and installing the windshield, you can replace it yourself without much difficulty.
( 143 votes, average: 4.47 out of 5)
Raptor paint for car body protection
Applying wax to a car body
Related Posts
What you need to replace your windshield
Before you begin replacing your windshield, you need to acquire all the necessary tools, which include:
- A thin awl or strong wire with a pointed end;
- A set of suction cups that can hold a lot of weight;
- Set of screwdrivers and wrenches;
- A faceted string with two handles or a special tool (in the form of a knife) for removing the windshield;
- Glue-sealant for glass, as well as tools for its application (gun);
- Masking tape;
- Solvent and primer;
- Rags, gloves, napkins and tampons.
The car should also be prepared for the windshield replacement procedure. It must first be washed and dried. It is better to place the car in a dry room for at least 10 hours.
Please note: It is better to carry out work on replacing the windshield with 2-3 people.
How to Remove the Rear Window on a VAZ 2114
Content
Replacement of rear window shafts
Change back glass yourself
If you have ever seen a specialist change his glasses on a VAZ, rear or front, changing the rear window itself will not be difficult. And if you've never seen it, that's okay.
Replacing glass yourself will give you a skill that will come in handy in the future. For example, your friend will ask you to change the glass
. And you will do it in a friendly mood. A friend or stranger will ask for money. You can even make money.
Dismantling old glass
To start replacing the rear window in cars, you need to leave the vases from the sealant grooves. To do this, you will need a flat blade screwdriver to remove the sealant from the inside of the glass. After that we'll just pull it out.
Then use a screwdriver to push the sealed frame as far as possible towards the outside of the glass. Then we do the same on the inside of the frame. Once the glass is released, we will move on to the extrusion process. For calling to help a smoker friend and asking him to keep his glass outside. They themselves squeeze (gently, but effortlessly) the rear window from the inside.
READ Replacement Low Beam Bulbs Opel Astra N
Removing glass from the trunk lid 2109 2114
An easy way to remove glass
even a schoolboy can handle the trunk lid.
replacement rear window 2109
replacing rear glass
on the trunk lid 2109.
The glass cannot be thrown off the frame the first time. This is not necessarily despairing and hysterical, but again suitable for printing with a screwdriver. Then try squeezing the glass again. He will continue to resist, but eventually he will pop out. Briefly rejoicing at this fact, we move on to installing new glass.
Insert new glass
To begin, place a new eraser on the new glass. Then place the other eraser in a place called the lock. This is great for drivers. Why is the lock used before glass installation and not after? Because it is much faster and, as practice shows, more convenient. After installing the lock, the most important thing. install rear window
in its place. To do this, we will need a two-meter long cord (in general, it is better to have a cord, a screwdriver and a friend on the plate to prepare in advance).
READ How to Remove the Rear View Mirror of a Skoda Octavia
We insert the cord into the seal groove, but not along the entire length, but only for the upper and side stays of the groove. The other ends of the cord should be approximately the same length. We then take the glass and insert it into the bottom groove as if wiping it to keep the seal flat. Then, calling a friend for help, we begin to pull ourselves towards the glass, pulling the cord out of the groove. The cord simultaneously pushes the eraser and allows the glass to rise slightly in your place .
This operation must be performed slowly, alternately pulling the cord to the right and then to the left. When the cord is fully extended, the glass with rubber strips will completely fit into the grooves. And this will mean that you have succeeded.
