The size of tires and wheels not only adds style to the car, but also greatly influences the vehicle's performance on the road. Each manufacturer indicates acceptable standard sizes, and AvtoVAZ is no exception. In this review, we will look at the wheel size of the Lada Largus.
Usually, the manufacturer, depending on the modification of the car, indicates several acceptable wheel sizes, Lada Largus is an exception. The instruction manual indicates the only wheel size for all trim levels: 185/65R15 . Lada Largus wheel parameters: 6Jx15, offset (ET) for R15 = ET50. Wheel hub bolt pattern 4x100. Everyone knows that the Lada Largus is a 2006 Dacia Logan MCV adapted for the Russian market. The technical characteristics of the foreign car indicate exactly the same wheel size.
Based on reviews and surveys of Lada Largus car owners, we can summarize:
- The most popular tire size with a diameter of 14 inches turned out to be 185/70R14 , by the way, it is indicated in the table with tire pressure. Another less popular option is 165/80R14.
- The majority use the standard wheel size 185/65R15 . Another popular size of the same radius is 195/65R15 . A few installed 205/60R15 and 195/60R15 tires on their cars.
- Fans of larger wheels install tires: 205/55 R16 , 195/60 R16 and 195/55 R16.
- R17 wheels: 205/50R17 , 205/45R17, 225/45R17 or 215/50R17.
- Exclusive sizes: 215/35R18 and 215/40/18.
R is not a radius, but a designation of the radius of the tire, and the number is the diameter of the rim in inches. The most popular wheel sizes are shown in bold.
When choosing wheels, you should take into account the full diameter of the wheel; it should not differ much from the standard one. Compatibility table:
Green indicates the minimum deviation of the wheel diameter (up to 3 mm); Orange indicates a diameter deviation from 3 to 6 mm.
Don't forget about the rim width:
Tire size for Lada Largus
Acceptable parameters are indicated depending on the modification of the vehicle; the Lada Largus tire in this version is an exception. The operating manual indicates the only tire size for the Largus car for all trim levels - 185/65 R15.
Product size Lada Largus
Design parameters for Lada largus are designated as follows: 6Jx15, offset (ET) for R15 = ET50. The hub bolt pattern is 4×100. The Lada Largus car is adapted for the Russian market. The technical passport of the Largus foreign car indicates the same wheel size.
Important!
The most popular tire size with a diameter of 14 inches was 185/70 R14. Another less popular option is the 165/80 R14 model.
Many motorists set the standard wheel size to 185/65 R15. Another popular size of the same diameter is 195/65 R15. A few installed 205/60 R15 and 195/60 R15 tires on their cars.
Many motorists like to install large tires: 205/55 R16, 195/60 R16 and 195/55 R16.
R17 wheels: 205/50 R17, 205/45 R17, 225/45 R17 or 215/50 R17.
Exclusive sizes: 215/35 R18 and 215/40/18.
Note!
R is not a radius, but a designation of the radius of the tire, and the number is the diameter of the rim, measured in inches.
Wheels for LADA Largus
For a long time, vehicle owners could provide their cars with exclusively heavy and bulky stamped wheels, which were hardly presentable. Fortunately, today the situation has changed significantly, and customers are presented with a large selection of disks from various manufacturers and of various designs. Variations have appeared that are distinguished by their low weight but significant strength, reliability and durability. One of the most current designs in terms of appearance, reliability and lightness are alloy wheels.
They are made from modern aluminum alloys, which are distinguished by their resistance to rust, light weight and wide design solutions. They are not restored when broken, but are one of the most common.
Today there is a wide range of light alloy wheels for LADA Largus from various manufacturers. But you need to know that when choosing disks, you must adhere to the factory recommendations regarding the diameter of the disks.
Selecting very large or small disks that do not meet the specifications can lead to negative results:
- fuel consumption increases noticeably;
- the percentage of suspension service life increases;
- maneuverability and controllability deteriorate.
The DILIJANS.ORG website offers to find these elements automatically using the electronic catalog. The selection of these elements is made taking into account various indicators, namely:
- mounting radius, which must fully correspond to the inner diameter of the tire;
- the number of holes for installation, as well as their radius - the disk notation system must agree with that indicated in the manual;
- Disc offset - the distance from the wheel mount to the symmetrical plane. If the wheel is large with a small offset, this will give the car additional stability and design, but increases the impact on the hubs;
- rim width - it determines riding comfort and speed.
To select the required wheel size, you just need to indicate the modification and year of manufacture of the vehicle. The system itself will select the disks that are most suitable for these parameters. If you have any questions, you can contact the support service - our consultants will provide the most comprehensive advice, as well as assistance in selecting the right equipment.
How to choose the right tire diameter
Choosing the required tire diameter for a domestic car
The choice of tires or wheels for the Lada Largus affects not only the external design of the car, but also the behavior of vehicles on the roads. Car manufacturers indicate acceptable dimensions. Before installing the appropriate components, you need to familiarize yourself with the basic parameters. After all, replacement of products is carried out in order to improve driving performance.
The Largus instruction manual indicates only one acceptable size - 185/65 R15. Factories install stamped wheels on Largus 15 inches. In addition to the standard size declared by the manufacturer, car enthusiasts install 14-inch tires with a dimension of 185/70 R14. Among 15-inch tires, the tires chosen for Largus are 195/65 R15; 205/60 R15, 195/60 R15 are rare.
Note!
Car enthusiasts who prefer larger-sized products use 205/55 R16, 195/60 R16. Less common are R17: 215/50 R17, 205/50 R17. Exclusive option - 215/40 R18, 215/35 R18.
Wheels for cars
Lada Largus is a station wagon with increased capability for transporting cargo. The car was released in 2011. The basis for the car was the Dacia Logan model, which is produced in Romania. "Largus" immediately became quite popular among car enthusiasts due to its increased capacity, low price and ease of maintenance.
Original alloy wheels "Lada Largus"
For any vehicle, wheels and tires are more than just a design element. It is on them that the behavior of the car on the road depends as much as possible. It is customary for all car manufacturers to indicate recommended dimensions for all their models. The AvtoVAZ concern is no exception.
Important!
Acceptable dimensions and parameters for wheel rims are specified to protect vehicle owners from the risk of negative impacts that may occur when installing incorrect spare parts and components.
However, it is not always and not among all manufacturers that it is customary to indicate the permissible dimensions and parameters of wheels. Often there are several options listed without specifying the minimum and maximum allowable ones. For example, in the official instruction manual for the Lada, the parameters of the wheels on the Largus are indicated in only two options:
- The usual model of the Largus station wagon should be equipped with products with a radius of R15.
- The all-terrain model "Largus Cross" is equipped with wheels size R16.
Note!
When installing products that are larger or smaller than the permissible dimensions, they may affect the ABS anti-lock braking system.
The AvtoVAZ concern does not recommend installing wheels of other sizes. Basically, they are replaced when the season changes, possible damage occurs, in which it is undesirable to use the product. In this case, replacing the disks with identical ones is explained by traffic safety.
Wheels for Lada Largus R15
Many car enthusiasts prefer to install large rims on their cars. This mainly happens to improve handling, dynamics and appearance.
Installing unsuitable wheels can affect the following characteristics:
- traffic safety;
- warranty conditions for the car, if the period has not yet expired;
- high-quality work of parts and suspension units;
- wear of chassis parts.
On a note.
As for the warranty conditions, for the Largus Cross car it is clearly stated that when installing wheel rims of other sizes, the warranty on the car becomes invalid.
Since the car has become quite widespread on the roads of the country, there are many offers for the sale of wheels and tires for it. In the original configuration, the Largus is equipped with stamped wheels. In this case, many car enthusiasts are not satisfied with the appearance and characteristics of the car in motion. Then the stamped products are changed to cast or forged. Wheels on Largus size 15 are the only ones provided by the manufacturer, regardless of whether they are stamped or cast.
You might be interested in: Wheel sizes for Renault Sandero Stepway
The Largus Cross model, even in the basic configuration, comes with installed cast parts.
Original alloy wheels on Largus Cross
If the owner has decided to replace the wheels, then there is plenty to choose from. The market offers stamped, cast and forged products of various sizes, colors and designs.
Car enthusiasts have the opportunity to purchase both original rims from the manufacturer and all kinds of replicas or used products. Various global manufacturers of cast and forged products are widely represented. These can be very popular, high-quality and expensive brands or lesser-known inexpensive ones.
As for seasonality, professionals recommend installing products with a smaller width and diameter for the winter. This is done to provide a higher level of stability on slippery roads and in bad weather. In the warm season, the size of wheels and tires does not play such a fundamental role. On the contrary, to get maximum stability and controllability, you need to choose wheels of larger diameter and width.
On a note.
You should pay attention to the following points: as the diameter of the disk increases, the height of the tire profile should be reduced. This is done to ensure that the wheel in the arch fits within the acceptable dimensions. In this case, the ride will be less comfortable, but the level of handling will increase and the appearance of the car will improve.
Which summer tires are best for Largus Cross cars?
Choosing summer tires for the Largus Kross
Tires on the Largus must necessarily correspond to the standard size of the wheel structure.
When choosing, the speed and weight index, brand and tread pattern are taken into account. The production date of the products plays an important role - if they were made more than 5 years ago, it is better to refuse such a purchase.
You may be interested in Sava - original tires
The pattern is divided into two types: asymmetrical, directional and symmetrical. The last option is considered the most popular. Since the symmetrical pattern is suitable for most cars. This option is considered as the most convenient for moving around the city. The main reason for choosing this pattern is low cost.
The directional tread pattern allows car owners to drive off-road, providing ideal directional stability and handling. Unfortunately, there is some noise when driving off-road.
Important!
The asymmetrical pattern has better characteristics. This option helps ensure ideal directional stability and reduce the risk of aquaplaning. These products have a high price.
When replacing wheel structures, it is necessary to select standard models. When installing large components, you will have to choose the appropriate tires with a low profile. To move on a flat road, it is better to use low-profile tires. This tire improves dynamic performance and handling.
How to choose alloy wheels
For the Largus Cross car model, there are many different variations for installing wheel rims. They vary in manufacturing methods, shapes, cost and design.
The characteristics, price and controllability of the machine depend as much as possible on the method of production of the products. For Lada Largus Cross, wheels are made from the following materials:
- Steel. Conventional stamped products are made from it.
- Aluminum and magnesium. Cast or alloy wheels are made from these materials.
- Titanium. In combination with aluminum and magnesium it is a raw material for the production of forged products.
As for the price, stamped wheels are the cheapest. Cast ones are considered more expensive and of higher quality. And forged products provide maximum strength and wear resistance. They are also the most expensive in the list of products presented.
In this case, forged wheels have the minimum weight and maximum strength characteristics. They have long been known for their use in auto racing and have become widespread in the automotive industry. But the forging process does not allow creating a variety of shapes and textures, so such products are limited in design solutions.
Stamped steel wheels can take any shape. Their prices also please car owners. However, high weight and low characteristics negate all the advantages of this manufacturing method.
You might be interested in this Features of 16mm wheels for Chevrolet cars
Casting is another matter. The process allows you to create products of any shape and texture. In terms of weight and strength, these products are slightly inferior to forged ones. But the ability to create a product of any size, width and shape quite cheaply makes these products extremely common on auto store shelves.
You can choose cast products for the Largus Cross machine from a wide range. Products from many brands of various colors, parameters and sizes are presented. The most famous companies Sparco, MOMO and Enkei are famous for their quality. You can choose cheaper products.
Alloy wheels are highly resistant to possible damage. Also among the advantages is light weight, due to which the car has greater dynamics and better handling.
What size and wheel alignment angles for Lada Largus
Dimensions of the product
Increasing the width of the products themselves will also have a positive effect on road holding, on the accuracy of car control, grip on dry roads will become better, and driving on uneven roads will become more comfortable. However, resistance to aquaplaning will deteriorate, noise will increase, fuel consumption will increase, and the tires will wear out faster.
The car is equipped with original 15-inch parts manufactured by Magnetto Wheels.
On the Lada Largus the wheel parameters are as follows: 6×15/4×100 D60.1 ET50:
- width - 6 inches;
- bolt pattern - 4×100;
- standard diameter - 15 inches;
- diameter of the central hole - 60.1 mm;
- the offset is 50 mm.
What is the bolt pattern on Lada Largus?
The manufacturer installs the following wheels and tires on the Largus: Bolt pattern - 4×100 (like Logan), offset ET 50, center hole - CO 60.1, width - 6.0J. 15 / 6.0J PCD 4×100 ET 50 CO 60.1 and tires 185/65 R15
no need to la-la. Logan has an offset of 45. If you put it on the Larik, the front calipers will clamp. you'll go to hell
Should I use the search?
