How to reset the on-board computer on a West

Parameters of the standard on-board computer - description of functions

BC Lada Vesta performs various functions - displays this data on the screen display.
The standard settings of the Lada 2180 computer reflect the indication of parameters on the monitor:• total mileage of the car in kilometers;• car mileage for one trip (km);• total travel time, including hours/minutes;• electronic clock;• average speed along the route (km /hour);• gear shift prompt;• gear number;• on-board network voltage indicators (volts);• current fuel consumption (l/100 km);• fuel costs per trip (l/100 km);• remaining fuel in terms of per kilometers (km);• speed limit indicator;• cruise control speed indicator;• outside air temperature.

The Lada Vesta instrument cluster has a built-in trip computer, with a number of useful functions not available in the BC of other competitive cars. For example, you can find out the voltage of the on-board network or the speed limiter.

Description of the Lada Vesta on-board computer

Vesta's on-board computer has many useful functions, some of which are missing even from European and eastern competitors. We list some of the functions of this type of on-board computer:

Total mileage over the entire life cycle of the vehicle (not reset)
Short-term mileage for measuring individual distances (resettable)
Current time (hh:mm)
Time spent on current trip
Average speed per trip
Recommendation for gear selection
Car electrical voltage
Fuel consumption (per trip, average and current)
Possible driving distance with current fuel supply
Outside air temperature

Description of functions

A review of the Lada Vesta on-board computer shows which parameters are displayed on the display or front panel display. This makes the life of a Lada car enthusiast much easier. On Vesta, the standard on-board computer shows the following information, in addition to error codes:

The magnitude of the vehicle network voltage;
Cruising range on fuel in the gas tank;
Current and average fuel consumption;
Remaining fuel in the tank;
Travel time along a specific route;
Average speed;
Watch;
Total mileage;
Controls the outside air temperature;
Gives gear shift hints (with or without sound);
On a Lada with cruise control, information about the installed parameters is displayed;
If there is an AMT, the gear engaged or the auto - manual mode is displayed.

On-board computer Lada Vesta The on-board computer on the Lada Vesta is configured using two keys on the right steering column switch. Using the keys, entering the menu, you can control the readings of Vesta BC, displaying the necessary data on the control panel. Thus, the driver constantly has the opportunity to control the required parameters of Vesta.

Parameters of the standard Lada Vesta onboarder

Depending on the model, the Lada Vesta on-board computer can perform a wide variety of functions and display relevant information on the screen display. In the standard version, the monitor displays:

total vehicle mileage in kilometers;
distance in kilometers traveled by the car in one trip;
Digital Watch;
travel time: hours, minutes;
speed in kilometers per hour;
recommendations for gear shifting;
voltage in the on-board network in volts;
current fuel consumption in liters per 100 kilometers;
fuel consumption per trip in liters per 100 kilometers;
fuel costs per trip in liters;
indicator of how many kilometers of fuel remain;
number of the included gear;
speed limit indicator;
outside air temperature.

How to set the clock on the Lada Vesta: photos and videos

Owners of a Lada Vesta car sometimes encounter difficulties using the on-board computer, as the software that monitors all the main functions of the car is proudly called. Using the BC, you can adjust the volume of the turn signal, find out the current fuel consumption, monitor the operation of the cruise control system, and even have a complete understanding of the voltage of the operating network.

To cope with this difficult task, it is enough to use the manual for regular use of the car, a copy of which is usually provided with the new Vesta.

Setting up the clock on the Lada Vesta with your own hands

Owners of a Lada Vesta car sometimes encounter difficulties using the on-board computer, as the software that monitors all the main functions of the car is proudly called. Using the BC, you can adjust the volume of the turn signal, find out the current fuel consumption, monitor the operation of the cruise control system, and even have a complete understanding of the voltage of the operating network.
To cope with this difficult task, it is enough to use the manual for regular use of the car, a copy of which is usually provided with the new Vesta.

Setting up the on-board computer clock

This option raises questions among some Vesta owners, although the algorithm is quite clear.

For settings:

Hold the top button pressed for about 3 seconds. The device will go to the editing menu.
The screen displays the previously set time. Press the key again for 2 seconds.
We observe the blinking of the first reading (hours).
Using the arrows we achieve the required value.
We repeat the procedure of pressing and holding until the menu switches to the minute selection mode. Set the required value again.
We move on to storing the selected values by the computer. To do this, hold down the same key (up).

Setting up the on-board computer on the Lada Vesta

We probably won’t find answers to all our questions there, since the menu is a service menu. It is necessary primarily for diagnostic specialists.

According to AvtoVAZ's plan, there is no need to provide the car owner with access to the functions of the Lada Vesta on-board computer. If the owner of the car mistakenly turns off the sound of the turn signal completely, then this mistake can be costly; in the event of an accident, it will be considered a breakdown.

New Lada: Installation of radio and speakers in the doors of Lada Vesta

Practice shows that many have independently figured out the hidden functions of the built-in software, adjusting the tone and volume when the turn indicators are triggered, and hazard alarm settings. The purpose of the review is not to unravel secrets that are inaccessible to the average car user. Our topic concerns the classical difficulty. What should I do if the current time is shown on the dashboard? How to fix it?

Setting the clock

Some car owners have a question about how to set the clock. For this:

Press the top key (hold it for about 3 seconds) to enter the editing mode.
The previously set time is displayed on the screen.
Again holding the top button for about 2 seconds.
The first value, the clock, starts blinking. Use the arrows to set the required value.
Hold up again and go to setting the minutes.
After the time has been set, it is necessary to secure the readings. To do this, you again need to hold the up key for a long time.

The time setting is complete.

Setting the clock on the Lada Vesta

Vesta bookmaker is equipped with useful functions, such as a clock - a convenient function and always at hand. Let's learn how to configure them. To enter the clock setting mode, you need to press the top BC button (), and hold it for a while. Once we get into the required display mode of the on-board onborder, only numbers will remain that reflect the current time, and the right one will blink continuously.

Here you can set the clock. In the Lada Vesta BC, each of the time digits has a separate adjustment, and therefore does not depend on the neighboring one. To set the first digit, short presses of the buttons (,↓) of the on-board computer are used. After setting the first digit, you should move to the next one by long pressing the top BC button ().

Reset fuel consumption on Lada Vesta

On the Lada Vesta dashboard there is an on-board computer that transmits the necessary information about the car to the driver. Using the BC, you can monitor the amount of fuel consumed over the last 100 kilometers; this parameter changes depending on the driver’s driving style. The average consumption on the on-board computer is indicated in the upper right corner (see photo above), in addition, in the same place the number of kilometers that the Lada Vesta can travel before the next refueling, as well as fuel consumption in real time, can be displayed.

The on-board computer is controlled using two buttons located on the switch to the right of the steering wheel. The Lada Vesta system understands three types of interaction:

Short press of one button
Long press one button (hold for 2-3 seconds)
Short press two buttons at the same time

In order to reset the average fuel consumption, long press the top button (press and hold for 2-3 seconds), after which you will be taken to the system indicator settings menu. The BC elements will go out and only the currently selected and edited item will blink. Let us remind you that in this article we are trying to reset the data on average fuel consumption, which is displayed in the upper right corner of the BC, which means you need to select this particular parameter, to select we use the same top button, but now with short presses:

When you directly reset the car's consumption, it is displayed as a four-digit number, similar to the time, this is how the Lada Vesta system works. As soon as you have selected the desired item, hold down the top control button and after 2-3 seconds the average flow rate will be reset to zero. To return to the regular menu, press the bottom arrow. The dashboard will now look like this:

As you can see from the photo, fuel consumption has been reset to zero, and in its place there are dashes. The indicator will reappear and be calculated as soon as you move.

At first, the average consumption will be very responsive to the driver’s actions, for example, it will increase when the air conditioner is turned on. The fact is that fuel consumption is calculated for the last 100 kilometers, and since you reset it to zero, the calculation is carried out only for the distance that the Lada Vesta traveled after reset.

Using this function, you can adjust your driving style and arrive at an economical option. In addition, average fuel consumption can indicate a high-quality refueling. If you wish, experiment, refuel at one gas station and reset the fuel consumption indicator, and when you run out of gas, go to another gas station and reset the required indicator again. The fact is that with higher quality and undiluted gasoline, the Lada Vesta will travel a greater distance, and its consumption per 100 kilometers will decrease. For the purity of the experiment, refuel with gasoline with the same octane number, and do not change your driving style.

Direct time setting

The time is set according to this scheme.

You need to enter edit mode. To do this, you need to press and hold the “up” arrow for about three seconds. At this moment, only the numbers “0.0 km” in the second line from the left of the display will start flashing on the screen. While in edit mode, you need to press the same arrow once. The clock indicator on the screen will blink, for example, “08:35”.

You will need to hold down the top key again for a few seconds to start changing the clock.

New Lada: Russian factories. First step: Lada Vesta first passed through the assembly line of the Izhevsk plant

Only the first digit “0” from “08:35” will begin to pulsate. Now you can use the arrows to change the readings of tens, of which we only have two. To go to the hour units, hold down the “up” button again for a couple of seconds, after which “8” will begin to pulsate. Using the joystick we set the numbers we need from “0” to “9”.

Installing a third-party computer

In the Lada Vesta model segment there are modifications that are not initially equipped with an on-board computer. Today this is not a problem, since a similar device is available for sale. The owner purchases it, and the station masters carry out the installation and connection. You can perform this activity independently, but this will require knowledge and experience.

Almost all models of on-board computers support the specified parameters, and some of them are capable of reading and displaying fault codes (errors).

Alternator belt Kalina 8 cl size

Towbar Kalina station wagon

Reverse gear does not engage on Kalina

Vesta on-board computer functionality

The computer in Lada Vesta displays a certain set of parameters. Such information greatly facilitates the driver’s fate, since he has an understanding of the performance of some important electronic and mechanical systems of his car. Also, having information about error codes, you can quickly resort to measures to eliminate failures and malfunctions.

So, the computer displays the following indicators (without taking into account the codes):

on-board network voltage;
range based on the amount of fuel remaining in the tank;
the residual volume of this same fuel;
average and current level of fuel consumption;
watch;
average speed value;
daily and total mileage;
outside atmosphere temperature;
signals about the need to change gears;
cruise control parameters (if installed);
symbol of the currently engaged robotic gearbox (if available).

To control the on-board controller in Vesta, you need to use two switches located on the steering column selector. By pressing the indicated keys we enter the menu, after which we select the required parameter, which will immediately begin to appear on the display. Through such simple switches, the driver will have operational information about the state of the systems.

Possible errors and methods for correcting them

When operating a car, sometimes malfunctions occur, information about which is displayed on the BC screen in the form of digital codes. The most common errors are:• 0217 – engine overheating;• 0230 – fuel pump failure;• 0301 – ignition fault;• 0351 – ignition coil damage;

• 0654 – tachometer failure; • 1617 – bad road. The standard onboarder of the Lada 2180 not only shows malfunctions of the car components, it is also susceptible to errors in operation. These faults can be checked quite easily: if no information appears on the screen when the ignition is turned on, you need to check the connector between the ECU and the computer.

Display of incorrect information appears when the protocol fails. To correct the error, you should reboot the bookmaker, in the menu that appears, select the protocol that matches the characteristics of Vesta and install it. If more serious faults are detected, it is better to contact the warranty service.