16 speakers in the standard places of the Prior

Acoustic podiums at Priora

Acoustic podiums on a Priora are very necessary when the owner is thinking about improving the acoustic characteristics of the car. The fact is that for normal sound reproduction in the cabin, the front speakers play an important role. It would be wrong to install ordinary small speakers in the door panels and trust them to reproduce powerful sound, since they will not cope with their task. And large speakers will not be able to be installed until acoustic podiums are installed on the Priora.

Modern podiums

Acoustic podiums yourself

Sound organization is a set of measures that includes not only sound insulation or installation of a subwoofer, but also installation in the front doors of the podiums. You don’t have to buy them, although you can find almost any option in stores today. You can make podiums with your own hands if you know the basic nuances of the operation presented in our instructions below. Modern acoustic podiums are not too different from those that came before. Although, this is at first glance, but if you take a closer look, you will see the following:

• Modern podiums are made of high-quality material, which significantly increases their service life. If earlier they were made of plastic, which soon became covered with cracks and delaminated, today podiums are made of more durable material;

Modern acoustic podium

• Acoustically, modern podiums have an excellent and comfortable matte surface that does not leave dirty marks. High-quality plastic or plywood, from which modern podiums are made, is quite difficult to accidentally damage;
• The current podiums are made in such a way that they provide the opportunity to conveniently lay hidden electrical wiring to the speakers;
• Modern podiums are distinguished by a slightly modified configuration, which allows the installation of not one, but several speakers that reproduce different frequencies.

Acoustic podiums for yourself

Sheathing materials

Acoustic lining for Priora

There are several basic materials that can be used in the door trim process:

• Carpet. Actually, this is a standard acoustic material that is used to cover almost everything in the car. Ideal for acoustic cladding as it does not muffle sound;

Note: you can not completely cover the door with this material, but simply make inserts from it.

• Genuine Leather. Of course, you will have to spend a tidy sum on this option, but the result obtained in the end will appeal to many. Even a relatively inexpensive car can look like a luxury car if its doors are covered with leather;
• Faux leather. In appearance it is almost no different from genuine leather, but it costs much less. Naturally, the characteristics are inferior to the previous version. It cracks under the influence of high temperatures, gets scratched, and loses its original appearance;
• Velours. This option is especially suitable for those whose car seats are also upholstered in velor. And if you choose the material in the same color scheme, it will turn out very solid;
• You can experiment and use some other materials. Their main feature is their sufficient thickness. Materials with a thickness of 1-2 mm are ideal.

Making your own podiums

Buying acoustic podiums, as mentioned above, is not necessary. You can make them yourself using our instructions.

Preparation

Required:

• Plywood or MDF;
• Polyurethane foam;
• Epoxy mixed with fiberglass;
• Fiberglass based putty;
• Finishing putty;
• Fine-grained and coarse-grained skins.

Making acoustic podiums yourself

How to make a podium with your own hands

Buying acoustic podiums, as mentioned above, is not necessary. You can make them yourself using our instructions.

Preparation

• Plywood or MDF;
• Polyurethane foam;
• Epoxy mixed with fiberglass;
• Fiberglass based putty;
• Finishing putty;
• Fine-grained and coarse-grained skins.

Making acoustic podiums yourself

Note. An important point: in designing a homemade podium, preparation of the base plays an indispensable role. It needs to be done wisely, trying to calculate everything very carefully and competently.

The point is that innovations should not spoil the appearance of the interior, nor should they interfere with the convenient operation of door handles and window regulators. Also, nothing should interfere with closing the door.

• We draw on paper or, better yet, on thick cardboard the shape of the podium, calculated according to all the rules, and then cut it out with scissors;

• We draw the part according to the cut-out template on plywood, the thickness of which should not be more than 8 mm. We work with a jigsaw and cut out two parts at once;
• We make spacer rings for pre-purchased speakers. We use plywood as the material for this. We measure the dimensions of the speaker and its protective grid. We make a mounting hole in the plywood, the internal diameter of which should correspond to the diameter of the speaker ring.

Note. As for the outer size of the circle, it should be the same as the diameter of the protective mesh. At the end, it is advisable to add 5-6 extra millimeters for a decorative ring.

• Cut out a template for a decorative ring from plywood. We coat it with glue and place it on the base of our structure.

Making acoustic podiums yourself

Note. To achieve greater reliability, after it has dried, it is advisable to nail the ring to the base with small nails.

• The rings are attached to the base with special slats made of wood or iron. They should be cut in advance to sizes depending on the degree of inclination of the ring relative to the base, individual preferences of the owner, etc.

As a rule, four rails should be attached to one speaker to the base. The slats are attached to the ring with self-tapping screws to ensure reliable fixation;

• Give the shape of the base a curve. This is why you need polyurethane foam. After applying it, you need to wait until it hardens, and then cut out rounded shapes, always without sharp corners.

Polyurethane foam is an important component of the podium manufacturing procedure

Note. To avoid large foam consumption, it is recommended to close the hole for the speaker on the podium with a plastic pipe, and cover it with cellophane on top. Once the foam has hardened, the pipe can be easily removed.

• It is necessary to apply the foam in an even layer, starting from the ring in a circular motion and ending with the edges of the podium.

Note. Until the first layer of foam has completely dried, it is recommended to apply a second layer around the decorative ring.

This is done to save time. It is better and more convenient to cut off the excess after the first hardening of the foam than to wait for the first layer to dry, apply the second and wait for it to harden again.

• After the foam has completely dried, you need to start forming the blank for future speaker mounting (see How to choose speakers for a car radio on your own). Excess foam is cut off with a sharp knife, and then the product is given the desired shape;
• The sandpaper is taken and the sanding process begins;

• After this, you need to level the surface by applying a thin layer of fiberglass putty. We wait until it dries, then we apply the second layer, then the third;
• After the last layer of putty has dried, we finally process the surface to the desired state, again using sandpaper.

Note. To protect the podium from mechanical stress, it must be covered with epoxy mixed with fiberglass. This composition must be applied according to the instructions, first in an even layer on the surface of the podium, and only then fiberglass putty is applied. At the end, you need to smooth everything out carefully. A rubber spatula is perfect for this job. Thus, the formation of folds is prevented and the fabric completely follows the contours of the podium.

• At the final stage, the podium must be covered with artificial leather. A technical hair dryer will help soften the material so that it lays down in an even layer. You need to fix the leather on the podium using a stapler, and cut off the excess material with a knife;

Read more: How to properly connect running lights yourself

Faux leather in different colors

• Next, you need to secure the podium to the Priora doors using self-tapping screws. They must be screwed in from the back side of the casing, and not from the outside. Everything, including the trim itself, door handles and decorative elements, is put in place.

Note. In order to more securely fix the homemade podium to the door, the use of special protrusions on the door is provided.

As a result, quickly, and without spending extra money on buying a podium, you can assemble it yourself and install it on the Priora. The cost of the operation is minimal, the costs are only for consumables, including plywood, glue, putty, and so on.

Watching thematic videos and photo materials will only be beneficial; the instructions should be studied thoroughly.

This is a rather complex and time-consuming process that requires some skills. But the results, for true music lovers in the car, justify these difficulties.

So, to create this miracle you will need the following ingredients:

• Polyurethane foam.
• Thin board or plywood.
• The cardboard is thick.
• Skins of various sizes.
• Glue.
• Fiberglass epoxy resin.
• There are two types of putty, with fiberglass and final.

And, of course, a set for a young carpenter. Jigsaw, drill, brushes and other tools. You can decide according to need.

Start

The first thing you need to do is calculate everything. It is necessary to plan so that the speakers installed by yourself do not in any way interfere with the operation of the internal mechanisms of the Priora door, window regulator and lock. After this, mark the base of the podium. Draw it on cardboard and cut it out. Place it on plywood and cut out a platform with technological holes.

The second step is to make a ring for the speaker. To do this, measure its external and internal dimensions. Cut out the ring so that the column fits exactly into the hole and does not damage the walls. Then make 4 slats to connect the ring to the base.

Second act

When all the parts are made, they must be securely fastened with self-tapping screws.

Treat all structural parts with glue. Then collect. Now work with foam. Find a plastic pipe with a suitable diameter for the internal hole for the speaker and insert it there. And start pouring polyurethane foam in a circle so that it protrudes slightly beyond the edge of the ring and beyond the edge of the base. When finished, leave to harden.

Continuation

When the mass has become hard, cut off the excess and give the desired shape. It all depends on the owner’s imagination. The main thing is that the podium does not interfere with closing the door. After giving the desired shape, sand it, and then treat the surface with epoxy with fiber and let it harden.

Final processing

Sand the epoxy coating thoroughly. And start applying putty. First with fiberglass content, and then with ordinary working putty. Treat the resulting masterpiece with the finest sandpaper. Now all that remains is to give the podium the necessary stylish look. It all depends on the taste of the owner.

It can be made to match the Priora interior material, or it can be made in metallic color or noble leather. The main thing is to choose the material. The easiest option is to treat it with automotive enamel of the selected color and cover it with varnish. Then dry. For those who are more picky, they can be covered with some material - leather, vinyl or velvet. The main thing is a tight fit and good glue.

Well, everything is dry. All that remains is to install the podiums in the Priora doors and connect the speakers. You can enjoy clear sound.

Organizing sound in a car is a set of measures, for example, sound insulation, installation of 16cm. speakers and subwoofer, as well as the production of podiums, because The standard dimensions of Priora speakers are only 13cm. Do you know how to make door podiums yourself?

Read more: How to bleed shock absorbers correctly before installing them on a car: what you need to know

Required. plywood, polyurethane foam, epoxy with fiberglass, putty with fiberglass, finishing putty, sandpaper (fine and coarse grit).

How to make podiums on Priora? The process begins with the manufacture of spacer rings for pre-purchased speakers; we use plywood as the material. Then we screw the resulting rings to the door trims (see removing door trims). At this stage, it should be taken into account that the podiums on the Priora should not be installed too close to the passenger’s feet, otherwise it will not be possible to open the glove compartment when the door is closed.

Further

1. Polyurethane foam was used to fill the volume. The approximate drying time is a day.
2. Give a forum to the podiums in the Priora doors, cutting off excess foam with a knife. It is important that the foam is completely dry, otherwise there will be a defect.
3. We reinforce the front podiums with epoxy and fiberglass. After the resin has completely cured, fiberglass putty should be applied. After drying, sand it with coarse sandpaper.
4. Finally level the surface of future door podiums using finishing putty.

After the putty has dried, we sand the podiums for the speakers with fine sandpaper (this process is long and dusty). It is impossible for the parts to have irregularities, because as a result they will be very noticeable. If unevenness remains, then the puttying process must be repeated until the podiums are perfectly smooth.

To give the door trims their final look, they should be painted (see painting plastic) or reupholstered with elastic leather (see reupholstering door trims).

It is worth noting that the quality of music depends not only on the speakers, but also on the soundproofing of the doors. By the way, do you know how to install podiums on a Priora without affecting the door trim?

Features of choosing and installing podiums for speakers on Priora

High-quality sound in a car is ensured by installing and connecting several speakers to the media system. The larger the tweeter, the louder the sound will be.

And the more speakers, the more voluminous the sound from the radio in the cabin. This is why many owners decide to install podiums on the front doors of the Priora to increase the playback volume. The speakers can be placed either at the top or at the bottom of the door.

New podiums on the Priora in the front doors: differences and features of the products

Before choosing a podium for Priora tweeters, the buyer needs to determine their appropriate size. This applies not only to the purchased speakers, but also to the free space left for a comfortable stay in the cabin. It is unacceptable to install an element that is too bulky, since it will not allow either the driver or the passenger to sit properly in the cabin.

In addition, the podiums should be conveniently attached to the side pads. The newly acquired elements must lie exactly on the surface of the door, without blocking the pocket. And special podiums for Priora, installed in the upper part of the sidewall near the pillar, will allow you to add new notes to the sound. And also achieve surround sound transmission.

The external design of the podiums also plays an important role. For example, in a car with a classic black and gray finish, you can buy podiums on a Priora in regular black or dark gray. But silver linings will look no less attractive, giving the interior a more modern look.

A car with a brown or beige finish should be complemented with podiums in a coffee or pleasant brown shade.

Small additions should not only be of high quality and convenient. The elements must look stylish in the car where they are installed. That is why only stylish podiums on Priora with tweeters can complement the interior and create really good sound from the media system. And during operation they will not cause any discomfort or noise.

How to install podiums with your own hands in Priora?

You can carry out installation without disturbing the overall appearance of the interior of the cabin using simple instructions. It is necessary to prepare screws in advance and remove the door trim. Buy a speaker and the cover itself. Next, the performer will only have to take the Priora podium and perform the installation according to the following scheme:

1. Mark the speaker installation location on the trim.

2. Cut a hole in the casing for the speaker, glue the mount with tape and pull the wires through it.

3. Return the trim to the door.

4. Screw the speaker mount to the door itself, and then screw the podium to the door.

5. Connect the tweeter.

Any motorist can install podiums on the Priora with his own hands. At the same time, do not forget about tightly screwing all elements. If any component of the structure is not secured correctly, rattling noise will follow when driving.

The resulting sound will not be loud or full enough. And the performer will subsequently have to redo the work again.

High-quality acoustic podiums on the Priora look like an indispensable element of the interior. At the same time, it blends perfectly with the side door and is a kind of continuation of it. And due to proper installation, it will not interfere with the driver or front passenger. In addition, it will allow you to refine the car and make it more respectable.

Considering the low cost of the products, making podiums for the front doors of the Priora with your own hands simply does not make sense. The time spent will not correspond to the money saved. But not everyone can make a really beautiful and even element. Therefore, the optimal solution would be to purchase factory podiums for certain speakers and with a certain design style.

More on our website